How to Turn on the Heating in the 10th Generation Civic?

How to Open the CRV Hood?

To open the CRV hood: 1. Pull the hood release lever located below the steering wheel on the left side. 2. After hearing the hood pop open, push the secondary release latch located above the vehicle emblem to the right. 3. Lift the hood with both hands and secure it using the support rod. Precautions when opening the CRV hood: 1. Avoid touching hot engine components to prevent burns. 2. Be cautious of sharp edges on connectors and wiring when cleaning engine bay components. 3. Never open the hood while the engine is running. Apply proper force when closing the hood. 4. Take precautions against water exposure.

20

3

Share

How to Set Up the Audio System in the Avancier?

The setup method for the Avancier audio system is as follows: 1. Restore all additional functions of the car's main unit to factory settings; 2. Set all amplifier volumes to the lowest position; 3. Adjust the treble, midrange, and bass to the center position; 4. Set the filter to 'off'. The Avancier's body dimensions are: length 4858mm, width 1942mm, height 1670mm, with a wheelbase of 2820mm, a trunk capacity of 510l, and a curb weight of 1708kg. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 193ps, a maximum power of 142kw, and a maximum torque of 243nm.

17

3

Share

What is the reason for the continuous noise after an electric vehicle gets rained on?

The reason for the continuous noise after an electric vehicle gets rained on is due to partial short-circuiting in the electrical circuits. Here are the relevant details: Precautions: After being exposed to rain, electric vehicles may have short-circuit issues, and it is not advisable to continue using them. It is recommended to wait until all the water on the electric vehicle has dried before resuming use. Continuing to use the vehicle may cause damage to it. Electric Vehicle: An electric vehicle is a lightweight and flexible mode of transportation, highly suitable for navigating congested urban roads. The structure of an electric vehicle is very simple, with its main components including the frame, motor, battery, and electronic control system.

4

2

Share

What is the minimum ground clearance of the Crown?

The minimum ground clearance of the Crown is 140mm. Minimum ground clearance refers to the vehicle's ability to pass over obstacles or uneven ground. The Crown's body dimensions are: 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm, a fuel tank capacity of 70 liters, a trunk capacity of 510 liters, and a curb weight of 1660kg. The Crown features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L L4 turbocharged engine, delivering a maximum horsepower of 235ps and a maximum torque of 350Nm, paired with an automatic transmission.

2

4

Share

Which Generation is the 2019 Golf Model?

2019 Golf is the seventh-generation model, featuring LED headlights, a grille connected to the headlights, and dynamic turn signal design for the taillights. The 2019 Golf has dimensions of 4259mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm. It comes with a 50-liter fuel tank, 380-liter trunk capacity, and a curb weight of 1200kg. The front suspension is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension. It is powered by a 1.6L naturally aspirated engine, delivering a maximum horsepower of 110PS, maximum power of 81kW, and maximum torque of 155Nm, paired with a 5-speed manual transmission.

19

0

Share

What type of suspension does the Volkswagen Lavida have?

The suspension systems of the Volkswagen Lavida are as follows: the front suspension is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension. The suspension system refers to all the force-transmitting connection devices between the vehicle's frame and its axles or wheels. Its function is to transmit forces and moments acting between the wheels and the frame, cushion the impact from uneven road surfaces transmitted to the frame or body, and dampen the resulting vibrations to ensure smooth driving. The essential functions of a suspension system include supporting the vehicle body and improving ride comfort. Different suspension setups provide drivers with varying driving experiences. Although seemingly simple in appearance, the suspension system integrates multiple forces and plays a decisive role in the vehicle's stability, comfort, and safety, making it one of the most critical components in modern automobiles.

18

1

Share

How to Turn on the Heating in the 10th Generation Civic?

How to Open the CRV Hood?

How to Set Up the Audio System in the Avancier?

What is the reason for the continuous noise after an electric vehicle gets rained on?

What is the minimum ground clearance of the Crown?

Which Generation is the 2019 Golf Model?

What type of suspension does the Volkswagen Lavida have?

What is the reason for the inability to eliminate excessively high airbag resistance?

What is the reason for the noise in the Cruze engine?

Where is Jinyu Tire produced?

How to Avoid Deducting Your Own ETC Money When Lending Your Car to Others?