···
Log in / Register

How to Turn on the Heating in Baojun 530?

5 Answers
LandonAnn
07/28/25 10:11pm

Baojun 530 heating activation method: Rotate the temperature knob to the red zone and turn on the blower. Remember not to press the AC button. Below is an introduction to car heating: 1. The correct way to turn on the heating: Start the car for about 5-10 minutes, and when the water temperature gauge rises to half of the normal temperature, turn on the heating. 2. Do not direct the heating towards the head; prolonged blowing can cause driver fatigue and affect driving safety. It is recommended to open the window slightly for air circulation when using the heating for a long time to ensure the oxygen level in the car and keep the driver alert.

Was this review help?
4
4
Share
AryaDella
08/12/25 1:40am

I've got some experience to share about turning on the heater in the Baojun 530. First, start the engine when you get in the car - the heater won't work until the engine warms up, so fiddling with it too early won't do any good. Then locate the temperature control knob on the center console and turn it toward the red/higher end - setting it to 28°C or higher works fine. Next, press the fan switch gently to activate it and choose a comfortable fan speed (not too strong to avoid drying out your face). Use the air direction button to select foot-level or face-level airflow - I recommend foot-level in winter as it warms you faster and maintains safer driving conditions. If you have automatic climate control, it's even easier - just press the AUTO button and set a high temperature for automatic adjustment of internal/external airflow. Remember to engage recirculation mode briefly for faster heating, but switch back to fresh air mode after a while to prevent stuffiness. Regularly clean the AC filter to prevent dust buildup and maintain cleaner, healthier warm air. While the operation is simple, don't overlook these key details - it's safest to make adjustments when parked to avoid distracted driving and ensure a comfortable journey.

Was this review help?
18
5
Share
Expand All
SanAlyssa
10/01/25 3:34am

I just started driving the Baojun 530 and figured out how to use the heater. First, start the engine and wait a few minutes until the car warms up before the warm air comes out. Turn the temperature knob to the right to set it to a higher temperature for heat. Press the fan button a few times to adjust to a medium wind speed that's comfortable and not too noisy. For air direction control, you can choose to blow at the face or feet—I prefer the feet for a cozy drive. Models with automatic air conditioning are more convenient; just press AUTO and turn the temperature a bit higher for automatic operation. It might feel unfamiliar at first, but you'll get the hang of it after a few tries. Remember, the temperature difference inside and outside the car can cause fogging after turning on the heater, so adjust the vents or switch to external circulation to avoid blurred vision and ensure safe driving. Regularly check the manual for simple maintenance to keep the system working well. These daily driving tips are practical and fun.

Was this review help?
18
4
Share
Expand All
OscarLee
11/14/25 5:21am

Operating the heating in the Baojun 530 is straightforward. Start the engine to allow the heat source to build up. Turn the temperature knob to the high-temperature zone to set the warm air. Turn on the fan switch to an appropriate airflow level without rushing. Select the foot-level airflow direction for concentrated warmth. Focus on driving during operation and avoid adjusting while driving—safety first. It's a simple task that improves with practice—practice makes perfect.

Was this review help?
18
4
Share
Expand All
AnaLynn
01/04/26 7:04am

Our family often takes trips with the kids in our Baojun 530, where the heater settings are cozy and safe. After starting the engine and waiting for it to warm up, we turn the temperature knob to the heat setting to get warm air. We set the fan to medium speed for a steady and quiet airflow. Adjusting the air direction to blow at the feet or the back ensures the kids stay warm too. Occasionally, we use the recirculation mode for quick heating but soon switch to fresh air mode for ventilation and health. With these simple steps, winter trips are comfortable and worry-free for the whole family. Regular cleaning of the air vents keeps the air fresh and hygienic, and everyone agrees it's great.

Was this review help?
15
2
Share
Expand All
More Forum Discussions

Does an upward-facing exhaust pipe have any impact during rainy weather?

An upward-facing exhaust pipe on a car does not significantly affect the vehicle during rainy weather. Here is some relevant information about exhaust pipes: Pressure reduction: It expels the exhaust gases produced by the engine, reducing pressure, which is an important factor in ensuring the continuous operation of a vehicle. Noise reduction: The entire exhaust pipe system includes two noise reduction mechanisms. The first is the exhaust manifold, which handles the gases expelled by the engine, and the second is the main muffler located at the end of the exhaust pipe. These two steps effectively reduce the noise of the exhaust gases to a reasonable level. Exhaust filtration: It helps minimize the pollution caused by exhaust gases in the air.
9
0
Share

How to Release the Clutch When Shifting Gears in Subject Three?

Diesel vehicles generally use the double-clutching method for gear shifting. When moving the gear lever, do not apply excessive force. When shifting from a lower gear to a higher gear, the acceleration speed should be moderate rather than too low, and the shifting speed should be smooth rather than too fast. When shifting from a higher gear to a lower gear, it is better to shift earlier rather than later. When shifting from a lower gear to a higher gear, do not exceed 2500r/min; when shifting from a higher gear to a lower gear. Do not let the engine run at high speed for a long time, nor let the engine run at low speed with full load for an extended period.
5
3
Share

What does 'stop and start again when turning right for large vehicles' mean?

This is a slogan on the body of large trucks, indicating that when making a right turn, the truck must first come to a complete stop before proceeding. Due to the significant blind spot on the right side of large trucks, which can easily lead to accidents, regulations require a full 5-second stop before restarting the turn. Below are relevant details: Purpose: Right turns by large trucks pose high safety risks, as the right-side blind spot may prevent drivers from noticing nearby motorcycles or bicycles, potentially causing them to be caught under the wheels. The 'stop-and-restart' rule aims to protect vulnerable road users on the right. Caution: When encountering a stopped truck preparing to turn in daily traffic, following passenger cars and pedestrians should avoid rushing the driver to prevent accidents.
19
2
Share

What is the method for reversing into the garage in Subject 3?

Adjust the rearview mirror slightly downward, and the reference point on the windshield should be observed earlier. First, when the rearview mirror aligns exactly with the yellow line, turn the steering wheel fully to the right. Then, check the rearview mirror. When you see that the garage corner and the door handle do not cross the line, straighten the steering wheel. When the left front door handle aligns with the left garage line, turn the steering wheel fully to the right again. When you see the corner of the garage at the bottom line, start to straighten the steering wheel. Stop when the rearview mirror coincides with the edge of the garage corner, and this is the correct aligned position.
14
1
Share

What is Audi Double Diamond called now?

Audi Double Diamond is now called Alpha Animation. Below is the relevant introduction: Introduction: Alpha Animation, fully known as Guangdong Alpha Animation and Culture Co., Ltd., was formerly Guangdong Audi Toy Industrial Co., Ltd., established in 1993. It is a Chinese animation and cultural industry group company with considerable strength and development potential. With the mission of developing the national animation and cultural industry and creating happiness, wisdom, and dreams for the world, it aspires to be a leader in China's animation and cultural industry. Achievements: Alpha Animation was listed on the A-share market on September 10, 2009, with a profit model that promotes the sales of peripheral derivative products through animation works. This is a significant breakthrough in the industrialization of the animation industry and has also caused a huge response in the industry.
10
4
Share

How to Learn Gear Shifting for Driving Test Subject 3?

Start in first gear and shift to second gear, then gradually upshift without skipping gears. Each gear shift should be completed in one smooth motion to avoid damaging the gears, which can harm mechanical components and potentially cause accidents. Familiarize with gear positions: Gear positions are usually clearly marked on the gear shift knob. When entering an unfamiliar new car, take time to learn the different gear positions. Starting procedure: Place the gear in neutral, depress the clutch, turn on the ignition, engage first gear, slowly release the clutch while applying throttle to start the vehicle. Acceleration process: After starting, as engine speed increases, shift to appropriate gears according to different vehicle speeds.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.