How to Turn on the Heating in a BMW 525?

1 Answers
OscarRose
07/29/25 12:13pm
The method to turn on the heating in a BMW 525 is as follows: 1. Start the car and properly warm up the engine; 2. Turn off the AC snowflake button; 3. Wait until the water temperature rises to the normal operating temperature; 4. Turn the knob to the red zone to activate the heating mode. Taking the 2021 BMW 525 as an example, it belongs to the mid-to-large-sized car category with the following dimensions: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, fuel tank capacity 68 liters, and curb weight 1705kg. The 2021 BMW 525 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine producing a maximum horsepower of 184PS, maximum power of 135kW, and maximum torque of 290Nm, paired with an 8-speed automatic transmission.
Was this review help?
13
3
Share
More Forum Discussions

What is the composition of the crankshaft flywheel assembly?

The crankshaft flywheel assembly consists of the crankshaft, crankshaft pulley, crankshaft torsional vibration damper, crankshaft main bearings, flywheel, starter ring gear, and other components. Below are the related introductions: 1. Function of the crankshaft: It converts the force transmitted from the connecting rod into rotational torque, which is then transmitted to the clutch via the flywheel, while simultaneously driving components such as the water pump, generator, and camshaft. The crankshaft is composed of main journals, connecting rod journals, crankshaft arms, counterweights, the crankshaft front end, and the crankshaft rear end. 2. Function of the flywheel: It stores the energy from the power stroke to provide power during non-power strokes and ensures smooth rotation of the crankshaft to reduce vibration. The flywheel also facilitates engine starting via the starter motor through its ring gear. Additionally, it serves as the driving disc of the clutch, transmitting the engine's power to the transmission system. The flywheel features top dead center (TDC) and ignition timing marks. 3. Engine firing order: In a four-stroke multi-cylinder engine, the crankshaft completes two full rotations for each cylinder to perform one power stroke.
1
2
Share

Can Flood-Damaged Cars Be Used?

Flood-damaged cars can be used if the engine has not been flooded. Additional information: Flood-damaged cars: Flood-damaged cars refer to vehicles that have been submerged in water, typically meaning the engine and transmission have been soaked, with the water level exceeding the wheels and vehicle seats, and the bottom components of the vehicle being in prolonged contact with water. Such vehicles pose significant risks, as the electrical circuits are prone to short circuits and fires. Classification: Commonly referred to as flood-damaged cars or water-immersed cars, these are vehicles where the water level has reached about one-third of the wheel height. If the bottom of the vehicle body is submerged in water for an extended period, the extent of water immersion can vary greatly. Flood-damaged cars can be categorized into three levels: if the water level exceeds the vehicle's chassis, it is called a water-immersed car; if the water level exceeds the oil dipstick, it can be referred to as a semi-flooded car; and if the water level has surpassed the engine hood or the instrument panel, it is called a fully flooded car.
8
4
Share

Can Flood-Damaged Vehicles Be Detected?

Flood-damaged vehicles can be detected. Both third-party inspection agencies and 4S shops can perform inspections for flood-damaged vehicles. Below is additional information: Flood-Damaged Vehicles: As the name suggests, flood-damaged vehicles refer to cars that have been submerged in water. Vehicles typically have markings indicating their wading depth in centimeters. When a vehicle exceeds this wading height, it can be classified as flood-damaged. Based on the extent of water damage, these vehicles can be divided into two types: one where the water level exceeds the wheels and enters the interior, referred to as partially flood-damaged vehicles, and another where the entire vehicle is submerged, known as severely flood-damaged vehicles. Hazards: The dangers of flood-damaged vehicles are significant. If a car is submerged, it can easily lead to rusting of body components, shortening its lifespan and reducing safety performance. Flood-damaged vehicles can cause corrosion and rusting of electrical wires, leading to sudden engine shutdowns or spontaneous combustion due to short circuits while driving, engine stalls at high speeds, airbags failing to deploy in critical moments or deploying unexpectedly, among other unimaginable consequences.
10
4
Share

What are the common mistakes made by novice drivers?

Common mistakes made by novice drivers include: 1. Coasting in neutral with an automatic transmission; 2. Not slowing down when going over speed bumps; 3. Driving off without fully releasing the handbrake; 4. Overly long warm-up times; 5. Keeping the clutch in a semi-engaged state for extended periods. Precautions for novice drivers include: 1. Adjusting the seat position and rearview mirrors and fastening the seatbelt before driving; 2. Turning the ignition key and waiting for the computer to complete its self-check before starting; 3. Ensuring the handbrake is fully released before driving; 4. Keeping the heel on the floor when pressing the pedals, slowly releasing the clutch and gently pressing the accelerator when starting; 5. Using turn signals and slowing down when turning or changing lanes; 6. Looking straight ahead at a distance of 100 meters when driving on clear roads, not just focusing on the immediate front of the car; 7. Turning on hazard lights when parking on the roadside; 8. Engaging the handbrake when parking; 9. Staying focused while driving; 10. Avoiding occupying two lanes for extended periods.
5
1
Share

Are Pickup Trucks Mandatorily Scrapped After 15 Years?

Pickup trucks are not mandatorily scrapped after 15 years. Below are relevant details about vehicle scrapping: Application Form Submission: Vehicle owners applying for scrapping and renewal must fill out and submit one copy of the "Motor Vehicle Alteration, Transfer, Modification, Suspension, and Scrapping Approval Application Form," stamped with the owner's seal. Registration Office Application: For vehicles that have reached the scrapping age limit, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age limit, upon verification and confirmation by the motor vehicle inspection office that they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. Definition: Vehicle scrapping age refers to a safety inspection system based on the number of seats and the period of use of the vehicle during its service life. It is stipulated that small and micro non-operational passenger vehicles, large non-operational cars, and wheeled special machinery vehicles have no usage age limit.
12
4
Share

How Long Can a Flood-Damaged Car Be Driven?

A flood-damaged car that has been repaired can generally be driven for three to four years, with some lasting four years and others up to five years. Therefore, the actual duration depends on the vehicle's condition. Additional Information: Reasons why flood-damaged cars cannot be fully repaired: Flood-damaged vehicles cannot be 100% restored to their original state and pose significant safety hazards. For example, the electronic systems are prone to short circuits, and if critical systems like ABS anti-lock braking, ESP stability control, or the engine ECU fail to function, the consequences could be disastrous. Other hazards of flood-damaged cars: Additionally, flood-damaged vehicles have other safety risks. Hot components such as the engine and exhaust pipe cool down rapidly when submerged, leading to deformation and increased unbalanced stress, which affects the lifespan of these parts. Moreover, dirty water can corrode the damaged structure of the car body, and some hidden areas cannot be treated with anti-rust paint. Over time, this corrosion weakens the car's structure, which is one of the major reasons why flood-damaged cars should be avoided.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.