How to Turn on the Heating Air Conditioning in the Binyue?

[LaJasper]

Here are the specific steps to turn on the heating air conditioning in the Binyue: 1. First, start the vehicle and allow the engine to warm up until the coolant temperature reaches 40°C-60°C or above. 2. Then, turn off the AC button and adjust the air volume and direction to a comfortable setting. 3. Adjust the temperature control to the red zone, and warm air will come out of the vents. 4. Press the AUTO button on the air conditioning system and set the desired temperature. For vehicles equipped with automatic air conditioning, simply turn the temperature control knob to the desired high-temperature value, then turn on the fan speed control switch or press the automatic air conditioning button.

[MacDylan]

When I first drove the Bin Yue, I didn't know how to turn on the heating either, but I figured it out later. After starting the car, don't rush to turn on the AC. It's best to wait until the coolant temperature gauge reaches the middle position—that's when the engine has warmed up. Then, simply press the automatic AC button on the center console and turn the temperature knob to the red zone, setting it above 20°C. Remember to turn off the AC switch on the screen because heating doesn't require the compressor to work at all. I usually set the vents to foot mode, as it warms up the fastest. If you want quicker heat, increase the fan speed, and if it feels too dry, crack the window slightly for ventilation. This routine is quite convenient. In winter, I use the mobile app to remotely start the car and warm it up ten minutes before leaving, so it's already cozy when I get in.

[CadenMarie]

Turning on the heating in the Bin Yue is actually quite simple with just a few steps. First, start the engine to let it run. If the water temperature isn't high enough, the heating won't be warm. Find the air conditioning interface on the central control screen and turn on the automatic mode, or simply press the AUTO button in the physical button area. Setting the temperature above 22 degrees is more suitable, with the red marking indicating the direction for increasing temperature. Check if the AC light is on; if it is, make sure to turn it off, otherwise it will unnecessarily consume fuel. For the airflow direction, it's recommended to choose blowing towards the legs and the windshield, especially in cold weather when fogging is likely. Finally, adjust the fan speed according to your needs—start with a lower speed when you first turn it on, and increase it once the water temperature rises for more comfort.

[Cory]

Turning on the heating in the Bin Yue is straightforward, so I'll get straight to the point. Start the engine and let the car warm up for a while, otherwise, you'll get cold air blowing out. On the dashboard, press the AUTO button with the fan symbol to activate the automatic air conditioning. Rotate the large knob on the air conditioning panel towards the red direction to set the temperature between 22-26°C. The crucial step is to turn off the blue AC light displayed on the central screen; that's the cooling switch. For the air vent direction, I usually choose the feet setting—warming your feet warms your whole body. There's no need to press any heating buttons; the temperature control is fully automatic. If the windshield fogs up, don't panic; just press the defogger button.