How to Turn on the Heater in Volkswagen Lamando?

Is Tire Bulging a Quality Issue?

There are many causes of tire bulging, which may not necessarily be due to quality issues with the tire itself. Poor driving habits can also lead to bulging in car tires. Therefore, it is essential to regularly inspect the tires during daily driving. The main reasons for tire bulging include the following: 1. Low aspect ratio: Tires with a low aspect ratio have thinner sidewalls. While these tires offer better grip and a sportier feel, enhancing vehicle handling, their sidewalls have minimal cushioning. When impacted, the rim can easily cut into the sidewall, potentially causing bulging. 2. Improper tire pressure: Overinflated tires become stiff, making the cord layers prone to breaking upon impact with hard objects. Underinflated tires, on the other hand, flatten out, and the rim may shear the sidewall upon impact, leading to cord layer breakage. 3. Impact with hard objects: If a tire collides with a hard object while driving, the intense impact can cause severe compression, increasing internal air pressure. This often results in bulging on the thinner side of the tire. 4. Expired warranty: Car tires have a limited lifespan, typically 3-5 years. After this period, bulging is more likely to occur during use.

1

3

Share

Why is there water dripping under the car after parking?

There are two main situations when water drips under the car after parking: drainage from the air conditioning system or water dripping from the muffler and exhaust pipe at the rear of the car. The reasons for this phenomenon are as follows: 1. In summer, the phenomenon of water dripping under the car after parking is caused by the temperature difference before and after the air conditioning system cools down, resulting in system drainage. (1) Due to the high temperature inside the car, the cooling system needs to be activated to lower the temperature. At this time, the moisture in the hot air inside the car will condense on the surface of the evaporator's heat-absorbing fins, which are at a very low temperature. The water droplets are collected by the plastic casing of the evaporator and discharged out of the car through the pipeline. (2) The low-pressure pipeline of the car's air conditioning system is not wrapped with thermal insulation foam, so the surface of the pipeline is prone to condensing moisture from the air. Water droplets will also condense and gather at the lowest point of the pipeline and drip down. 2. Water dripping from the muffler and exhaust pipe at the rear of the car is also a normal phenomenon, which mostly occurs in winter. Gasoline is injected into the cylinder and mixed with air. After full combustion in the combustion chamber, it mainly produces carbon dioxide and water. At high temperatures, the water is discharged into the atmosphere in the form of gaseous water vapor. Since the muffler is located at the rear of the car, where the temperature is relatively low, the water vapor will condense into liquid water when it encounters the cold.

3

1

Share

Why is the engine warning light on in the Volkswagen Passat?

Reasons for the engine warning light being on in the Volkswagen Passat: 1. Exhaust emissions not meeting standards; 2. Poor performance of the engine system; 3. Some vehicle transmission system faults are indicated through the engine warning light. The Volkswagen Passat is a mid-size car under SAIC Volkswagen, with body dimensions of 4933mm in length, 1836mm in width, and 1469mm in height, a wheelbase of 2871mm, and a body structure of a 4-door, 5-seater sedan. The Volkswagen Passat is equipped with a 1.4T turbocharged engine and a 2.0T turbocharged engine, with an L-type cylinder arrangement, matched with a 7-speed dual-clutch transmission.

17

4

Share

What is the method for adjusting the headlights of the Passat?

Passat headlight adjustment method: You need to open the hood. There are two holes above the headlights on the front cover, inside which are the headlight adjustment screws. The inner adjustment screw is used to adjust the height of the headlights, and a Phillips screwdriver is required for adjustment. The Passat is a mid-size sedan designed by Volkswagen AG in Germany. Its body dimensions are 4870mm in length, 1834mm in width, and 1472mm in height, with a wheelbase of 2803mm. The exterior design of the Passat draws inspiration from the Volkswagen Phaeton, with changes to the bumper design. The dashboard features an analog clock, and the GPS navigation module has been upgraded, giving it a more stable and sophisticated feel.

20

2

Share

Will changing the color of a car emblem result in a penalty?

The color of a car emblem can be changed, but it requires prior registration. Below is the specific registration process for changing the color of a car emblem: 1. Changing the color of a vehicle requires prior registration to obtain legal status. However, the emblem, body color, and license plate are crucial identifiers of a motor vehicle. Unauthorized changes can pose risks to vehicle management and road traffic control. 2. If the new vehicle color is a standard one, such as white or black, you can first complete the color change and then directly visit the vehicle management office to complete the relevant change procedures, which can be done on the same day. 3. If the color change is uncommon, it is advisable to bring a 'color sample' to the vehicle management office for approval before proceeding with the color change and subsequent steps. Although this method is more time-consuming and labor-intensive, it is safer. 4. Prepare the required materials: the vehicle's registration certificate, the owner's ID card, and the vehicle registration certificate (green book). If a friend is handling the process on your behalf, their ID card must also be brought along.

4

1

Share

What Causes the Car to Shake When Braking?

The specific reasons for car shaking during braking are as follows: 1. Uneven wear of the brake disc, also known as one-sided severe wear. This is caused by the vehicle's own issues, mainly due to poor retraction of the brake caliper. Car braking is achieved by two friction pads pressing against the brake disc through the caliper's force, creating friction for braking. Since the brake is only connected to the inner friction pad, incomplete retraction of the caliper after braking can lead to aggravated one-sided wear. 2. Driving habits. Continuous braking can generate high heat in the brake disc. If hard braking is applied at this moment, it may disrupt the dynamic balance of the brake disc. Brake discs are made of cast iron (pig iron), which has good stability, but improper operation can still cause deformation. 3. Use of low-quality brake pads. Inferior brake pads contain more metal, making them harder and more prone to resonance when rubbing against the metal brake disc, amplifying vibrations and causing shaking.

5

Share

How to Turn on the Heater in Volkswagen Lamando?

Is Tire Bulging a Quality Issue?

Why is there water dripping under the car after parking?

Why is the engine warning light on in the Volkswagen Passat?

What is the method for adjusting the headlights of the Passat?

Will changing the color of a car emblem result in a penalty?

What Causes the Car to Shake When Braking?

What Are the Four Warning Signs Before Brake Failure?

How to Repair Scratches on Car Windshield Film?

How to Open the Trunk of an Audi A6L?

What is the function of heated rearview mirrors in sedans?