How to Turn on the Heater in the Lamando During Winter?

[CalebFitz]

The method to turn on the heater in the Lamando during winter is: 1. After starting the vehicle, wait until the coolant temperature rises to the normal operating temperature before turning on the heater; 2. Adjust the air conditioning circulation mode to internal recirculation; 3. Rotate the right-side temperature control knob clockwise to set the temperature into the red zone. The Lamando is a compact 4-door, 5-seater sedan with body dimensions of 4615mm in length, 1826mm in width, 1425mm in height, and a wheelbase of 2656mm. It is equipped with a 1.4L turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 96 kW and a maximum torque of 225 N·m.

[OPatrick]

Here’s how I usually use the heater in my Lamando during winter: After starting the car, don’t rush to drive off—wait 3-5 minutes to let the engine warm up. Otherwise, if the engine isn’t hot enough, the heater will blow cool air. On the AC panel, turn the temperature knob to a warm setting, like 24°C or higher. Remember to turn off the A/C button since the heater relies on engine heat, and using A/C just wastes fuel. Adjust the fan speed manually to a moderate level, or press AUTO for hassle-free automatic mode. I prefer running the external air circulation for 1-2 minutes first to remove cabin humidity and prevent fogging, then switch to internal circulation to retain warmth. If the windshield frosts over, switch to defrost mode and increase fan speed to blast the front glass. Also, check the cabin air filter regularly to avoid clogs—a dirty filter reduces heating efficiency. Overall, it’s simple to operate, keeping the drive warm, safe, and comfortable.

[AvaAnn]

Having driven for over a decade, I'd like to share my winter heating tips for the Lamando: First, be patient after starting the car—wait until the coolant temperature gauge passes the halfway mark before operating the AC. Otherwise, the windshield may fog up dangerously. For climate settings, I recommend using AUTO mode: simply rotate the knob to set your desired temperature (e.g., 22°C), and the system automatically balances airflow for better efficiency. Remember to turn off the A/C button. Set vents to direct air toward footwells or windshield defrost, avoiding direct face blasts that may cause dizziness. While recirculation works well in subzero temperatures, don't use it continuously—I switch to fresh air every 20 minutes to prevent stale air buildup. Always check coolant levels, as low fluid diminishes heating performance. If you hear unusual noises or get insufficient warmth, promptly visit a workshop to inspect the radiator or electrical systems. Safe driving always comes first!

[MacSophie]

I've been driving the Lamando for two or three years, and the winter heating operation is quite simple. After starting the car, wait a bit for the engine to warm up. Just press the AUTO button on the air conditioning panel to increase the temperature setting, and turn off the A/C switch. Adjusting the fan speed to level 2 is just right to prevent noise. The internal circulation works well for heat retention in cold weather. Use the defrost mode to quickly remove fog. Regular maintenance keeps the system clean.