···
Log in / Register

How to turn on the heater in NIO ES6?

5 Answers
JourneyMarie
07/29/2025, 06:49 AM

Method to turn on the heater in NIO ES6: First start the engine for preheating, wait until the engine temperature pointer reaches the middle position, then turn on the heating air conditioning. At the same time, set the air circulation to external circulation to expel the cold air inside the car. After waiting for 2 to 3 minutes, set the air circulation to internal circulation. The car's heating system can heat the air inside the car or the air drawn from outside into the car, thereby increasing the interior temperature. There are many types of car heating systems, which can be divided into hot water heating systems, gas heating systems, and exhaust heating systems based on different heat sources. Currently, small cars mainly use hot water heating systems, while large vehicles mainly use gas heating systems. In terms of body dimensions, the car has a length, width, and height of 4850mm, 1965mm, and 1758mm respectively, with a wheelbase of 2900mm.

Was this review help?
14
0
Share
SanXavier
08/13/2025, 12:12 PM

When I first got my NIO ES6, the first thing I did in winter was turn on the heater, which was super easy to operate. After starting the car, I'd find the air conditioning control icon on the main screen and tap it, then simply slide the temperature slider to the right to a higher setting, like above 20°C, and the system would automatically start blowing warm air. If I didn’t want to fuss with settings, pressing the AUTO button would intelligently adjust the temperature and fan speed, warming up the cabin pretty quickly. I also made it a habit to check the recirculation mode to ensure heat retention, especially when stuck in traffic—using the heater this way also helped prevent fogging on the windows. Overall, the ES6’s climate control responds quickly, and while it does increase power consumption a bit, it’s not excessive, making long drives especially comfortable.

Was this review help?
1
2
Share
Expand All
OIan
10/07/2025, 03:22 AM

Turning on the ES6's heater is straightforward—just a few steps. Start the car, bring up the air conditioning interface on the screen, set the temperature to a higher value like the 20s (°C), and the car will automatically switch to heating mode. You can also manually adjust the fan speed, but the auto mode is more convenient and energy-efficient. The key is to adjust the temperature according to the weather—avoid setting it too high to prevent a rapid increase in power consumption, which could affect the range. Using the heater in winter has many benefits, like defogging and improving driving comfort, especially when it's freezing. Just remember to check if the windows are properly sealed while operating it.

Was this review help?
16
5
Share
Expand All
HaydenDella
11/20/2025, 03:45 AM

Operating the heater in the NIO ES6 is very intuitive. After starting the vehicle, tap on the air conditioning settings on the touchscreen, slide the temperature to a higher setting such as above 22 degrees, and the system will immediately blow warm air. It is recommended to use the automatic function, which automatically balances the airflow according to the temperature difference inside and outside the car, saving you the trouble of manual adjustments. This way, the car warms up quickly without wasting electricity, making children more comfortable when driving with them. Setting the temperature at a moderate level can avoid dryness, and it's also good to pay attention to the direction of the air vents to avoid blowing directly on the face, which could affect safety.

Was this review help?
12
5
Share
Expand All
Judy
01/10/2026, 10:33 PM

The heating system of the NIO ES6 is primarily controlled via the touchscreen. After starting the vehicle, enter the air conditioning interface and increase the target temperature. The vehicle's system will detect the temperature difference and activate the heating elements to generate and output warm air. You can choose automatic mode or manually adjust the fan speed for efficient and convenient operation while also considering energy consumption. Setting a reasonable temperature optimizes the cabin environment, and using the external air circulation helps maintain fresh air. When operating, don't overlook the battery status to prevent insufficient charge from affecting driving.

Was this review help?
8
3
Share
Expand All
More Forum Discussions

What is the difference between the Butterfly Ben and the Tiger Head Ben?

The differences between the Tiger Head Ben and the Butterfly Ben are as follows: 1. Tiger Head Ben: The Tiger Head Ben refers to a model of the S-Class Mercedes-Benz, produced from 1989 to 1999, named for its square-shaped design resembling a tiger's head. 2. Butterfly Ben: The Butterfly Ben refers to the older model of the Mercedes-Benz S600, specifically the Millennium edition, named for its radiator grille that resembles butterfly wings. Additional Information: Mercedes-Benz is a world-renowned luxury car brand. In January 1886, Karl Benz invented the world's first three-wheeled car and was granted a patent, earning him the title of 'the inventor of the automobile.' At the same time, Gottlieb Daimler, another founder of Mercedes-Benz, invented the world's first four-wheeled car. From then on, the world was changed. In June 1926, Daimler and Benz merged to form Daimler-Benz AG, and the cars named Mercedes-Benz became the perfect representatives of high-quality and high-performance automotive products. In addition to premium luxury cars, Mercedes-Benz is also one of the world's most famous manufacturers of buses and heavy-duty trucks.
1
0
Share

What is the fuel consumption of the Vios Bear?

The comprehensive fuel consumption of the Vios is 4.9-5.1L/100km. There are a total of 6 Vios models currently on sale: the CVT Chuangxing CARE Edition, CVT Chuangxing Edition, CVT Zhixing Edition, and CVT Shuxing Edition, with a comprehensive fuel consumption of 4.9L/100km. The manual Qianxing Edition and manual Chuangxing Edition have a comprehensive fuel consumption of 5.1L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.1-7.0L/100km. Specific factors affecting a car's fuel consumption are as follows: Vehicle weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV weighing about 1.5 tons consumes around 8.5 liters. Different weights result in varying fuel consumption. Drag coefficient: Higher drag coefficients increase fuel consumption during driving. Cars with better aerodynamics have lower drag coefficients, leading to reduced fuel consumption. Optimal engine speed: During operation, the engine has a most economical torque output point. Maintaining the car's speed within this torque output range can significantly reduce fuel consumption. Typically, small-displacement cars achieve this at about 70 km/h, while larger-displacement cars reach it at around 100 km/h. Staying within this optimal speed range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption.
14
4
Share

What does the God's Eye 540-degree transparent chassis mean?

God's Eye 540-degree transparent chassis refers to a technology that allows visibility of all surroundings of the vehicle. Below are the relevant details: 1. Models equipped with this feature: BYD Song Pro, Land Rover Range Rover, Geely ICON. 2. Features: The configured touch screen enables switching between various viewing angles, assisting drivers in more comprehensively identifying potential safety hazards on the road. If the vehicle is driving on rough terrain, the transparent chassis allows the driver to clearly observe the position of the tires, enabling immediate avoidance of obstacles such as uneven road surfaces and rocks, thereby preventing situations like tire sinking or chassis scraping that could harm the vehicle.
18
3
Share

Where is the reset button for the Geely Emgrand center control screen?

In the center control screen. Here are detailed introductions about the Geely Emgrand: 1. Overview: The Geely Emgrand is a compact car under Geely, with dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. The Emgrand EC718 and EC718-RV are the first B-segment sedans from Geely, available in three-box and two-box versions respectively. 2. Configuration: The Geely Emgrand features a MacPherson independent front suspension and a torsion beam non-independent rear suspension, with front-wheel drive. It is equipped with a 1.5L naturally aspirated engine and a 1.3T turbocharged engine, paired with a CVT transmission.
14
0
Share

What does the M gear in Tayron mean?

Tayron's M gear is the manual mode in automatic transmission models. Here are some extended details: 1. Overtaking: By switching to manual M gear and downshifting to 1st gear, you can achieve faster overtaking, which is more effective than pressing the accelerator deeply in D gear. 2. Uphill: If you are in D gear uphill, the car may not necessarily lock in 1st gear, as the computer determines gear shifting based on the vehicle's current speed. By locking in 1st or 2nd gear with M gear, the vehicle will handle uphill much easier. 3. Downhill: When encountering a long and steep downhill slope, switch to M gear and adjust to 1st or 2nd gear to utilize the engine's braking effect, reducing the pressure on the brake pads. Prolonged braking in D gear downhill can cause the brake pads and wheel hubs to overheat, not only affecting the lifespan of the components but also potentially leading to complete loss of braking efficiency and safety accidents in severe cases.
8
3
Share

Does the Crown Land Cruiser have a five-seat version?

The lowest configuration offers one five-seat variant, but production allocation is very limited. Below are details about the Crown Land Cruiser: 1. Powertrain: The Crown Land Cruiser is equipped with a hybrid system combining a 2.5L engine and electric motor. This powertrain delivers a maximum power output of 183kW, with the engine producing 192Ps and the motor generating 182Ps. 2. Exterior: Positioned as a midsize SUV, the Crown Land Cruiser adopts an all-new design language. It features the sporty Highlander design language from the U.S. market, with a hexagonal front grille that has been blacked out. The classic Crown emblem is prominently placed, enhancing both premium appeal and nostalgia. Additionally, the front fascia incorporates sharp LED headlights and aggressive lines for a more striking visual presence.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.