How to Turn on the Heater in Haval H6?
3 Answers
To turn on the heater in Haval H6: 1. Turn off the AC; 2. Rotate the right-side temperature control knob clockwise to set the temperature into the red zone. The Haval H6 is a compact 5-door, 5-seat SUV with body dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, with a wheelbase of 2738mm. It is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 155 kW and a maximum torque of 325 N·m. The drivetrain is front-wheel drive, with a MacPherson independent front suspension and a multi-link independent rear suspension.
I've been driving a Haval H6 for several years, and using the heater in winter is quite straightforward, mainly relying on the air conditioning panel on the center console. After getting in the car, start the engine and let it warm up for a few minutes so that the hot air becomes effective once the coolant temperature rises. Locate the temperature knob near the steering wheel and turn it to the red zone—setting it above 22°C, for example, will keep you warm. If the air conditioning is off, press the AUTO button to activate the system automatically; it will adjust the fan speed and airflow direction based on the cabin temperature. Don’t forget to adjust the vent direction to avoid blowing directly at your face, reducing dry eyes. The fan speed can be controlled via buttons, and I prefer using the medium setting to minimize noise. In winter, I usually turn on the external circulation to defrost and prevent fogging, and I regularly check the air filter to avoid unpleasant odors. Overall, the operation is quite user-friendly. Remember to maintain the air conditioning system regularly to extend its lifespan, ensuring both warmth and safety while driving.
When I first started driving this car, I didn't know how to turn on the heater either, but I figured it out after some trial and error. After starting the vehicle, don't rush to turn on the AC. Wait until the temperature gauge shows about halfway before operating, as this is both efficient and protects the engine. Look for the temperature control knob on the center console, turn it clockwise to the red end, and set it to 25 degrees for sufficient warmth. The fan speed button is below—setting it to level 2 or 3 is comfortable. If turning on recirculation causes the windows to fog up easily, I usually switch to fresh air mode for a few minutes first before going back to recirculation. Pressing the AUTO button lets the system manage itself, reducing distractions. I've also found that adjusting the vents toward the feet keeps you warmer and avoids driver distraction. A reminder for beginners: don't crank up the fan speed right after a cold start, as it will be noisy and drain the battery. Take it slow and let the cabin warm up gradually.
