How to Turn on the Heater in Geely Vision X3?

[Kevin]

To activate the heating function of the Geely Vision X3's air conditioning system, ensure the air conditioning controller is operating normally. Rotate the temperature adjustment knob to set the temperature between zero and eight levels. Turning the knob clockwise increases the temperature setting, and the display will show the current operating status. When using the car's heating system in winter, please note the following points: 1. In cold weather, you can switch the fan speed to level four for a few minutes to help remove ice, snow, or moisture from the intake ducts, reducing condensation on the windshield. 2. In cold weather, do not immediately turn on the heating when starting the car. Wait until the engine coolant temperature rises before activating the air conditioning. 3. Avoid setting the air conditioning temperature too high, as prolonged exposure to excessively hot temperatures may cause drowsiness and affect driving. 4. Turn off the air conditioning before parking and switch to external circulation with natural air to clean the air conditioning system's air ducts and prevent bacterial growth.

[SanAngelina]

Operating the heater in the Geely Vision X3 is really straightforward. As a frequent driver of this model, here's my method: After entering the car, start the engine first since the heater relies on engine-generated heat. Typically wait 2-3 minutes for the coolant temperature gauge to rise. Then locate the circular temperature knob on the center console - rotate it manually to the red zone or set to high temperatures (28°C or above). Next, find the fan speed button: press to activate the fan starting with low speed (avoid maximum setting initially), then increase airflow after warm air circulates. For automatic AC models, simply press AUTO and set the desired temperature. Pro tip: Remember to turn off the AC switch for better fuel efficiency. The whole process takes just 1-2 minutes, making winter drives comfortably warm and pleasant.

[DiCharles]

When I first bought the Geely Vision X3, I didn't know how to turn on the heater. Now I've got it figured out: start the car and wait patiently for the engine to warm up until the temperature gauge reaches the middle—this is crucial, or you won't get warm air. Look for the temperature knob on the dashboard, usually the one on the left, and turn it to the right for heat. Then press the fan button to start the airflow, beginning with low speed. For automatic AC, just press AUTO and set the temperature. Don't panic; practice a few times as a beginner, and the actions will become smooth. Once the engine is warm, the airflow heats up quickly, warming the car in minutes—quite a user-friendly design.

[VonDamian]

To turn on the heating in the Geely Vision X3, follow these steps: After starting the car and waiting for the engine to warm up, press the AUTO button. The system will automatically adjust the temperature and airflow. You can also manually set a higher temperature by turning the temperature knob for quick warmth. For manual control, simply turn the temperature control knob and turn on the fan. The smart control ensures rapid heating.

[Anastasia]

I care about fuel consumption, so here's how I operate the warm air in my Emgrand X3: After starting the car, wait for the engine to warm up, then turn the temperature knob to the red zone on the right, turn on the fan, and turn off the AC button for fuel economy. Set the fan speed to medium for cost-effectiveness. This quick operation ensures comfort and high cost performance, and it's also good for the car in the long run.