How to Turn on the Heater in Geely Boyue?

[EzraLee]

The heater switch for the Geely Boyue is located at the inner circulation knob of the air conditioning control buttons. To activate the heating, first start the car and wait approximately 8-15 minutes until the water temperature rises to the normal level. Then, you can turn on the heater. Adjust the air conditioning circulation mode to inner circulation, and finally, use the temperature control to increase the temperature. Below are some related instructions for turning on the heater in the Geely Boyue: 1. Switch to the heating mode. Some cars indicate this with a red zone, while others use a sun symbol. Do not turn on the air conditioning (do not activate the AC switch), as the heater utilizes the car's own heat circulation. 2. Adjust the air conditioning blower to a suitable speed and set the air outlet direction (the warm air is usually directed forward and toward the feet).

[SanPiper]

Turning on the heating in the Geely Boyue is quite simple. Here's how I do it every cold day: First, start the engine and let it warm up for a few minutes, as the heating system relies on engine heat. Then, locate the temperature knob in the center of the AC panel - turn it clockwise to the right to increase the temperature, usually above 24°C. Next, adjust the fan speed to a comfortable level using the fan control button; too high creates noise while too low won't provide enough warmth. Remember to turn off the A/C button since it's for cooling and unnecessary for heating, which saves energy. Finally, set the air vent direction preferably toward the footwell and windshield area for faster warming and anti-fogging effect. Experiment with different temperature and fan speed combinations to find your ideal comfort setting.

[DelStephanie]

As a car enthusiast, pay attention to the system's working principle before turning on the heater. After starting the vehicle, wait until the engine coolant temperature reaches the middle position. The Geely Boyue's center console has a temperature knob—turn it to the right to increase the value, with a recommended setting of 25-28 degrees. Set the fan speed knob to medium to avoid excessive power consumption. Turn off the AC button to use external air for more effective heating. You can also press the auto button to let the system automatically control fan speed and temperature, making operation more effortless. Remember not to turn the fan to high immediately after starting; let the heat circulate for a while. Preheating the internal ducts before blowing air ensures more uniform and efficient heating.

[DeValerie]

Start the Geely Boyue, just warm up the engine. Turn the temperature knob to the right, raise it to around 25 degrees. Adjust the fan speed button, select around the third gear. Turn off the A/C button. The whole process takes just one minute, ensuring a comfortable drive without freezing feet.