···
Log in / Register

How to Turn on the Heater in BYD Song Plus?

6Answers
OSimon
07/28/2025, 11:49:21 AM

Do not immediately turn on the heating air conditioning when warming up the car in the morning. Wait until the water temperature in the radiator rises before turning on the air conditioning. Do not set the air conditioning temperature too high. Prolonged exposure to excessively hot temperatures can make the driver drowsy and affect driving. Additionally, avoid directing the warm air directly at the driver's face. After turning on the heater, if the windows start to fog up, most people tend to turn off the heater or use cold air to clear the fog. Instead, increase the heater fan speed and let it blow for a while longer. At this point, check if the air filter is too dusty or if the airflow regulator is malfunctioning. If so, it's advisable to visit a repair shop for inspection.

Was this review help?
110
Share
MacFinn
08/11/2025, 04:08:35 PM

I've been driving the Song Plus for a while now, and using the heater is actually quite simple. After starting the car, don't rush—wait until the water temperature gauge on the dashboard rises to the middle position before operating it, as the engine heat will be sufficient by then. Simply rotate the temperature knob on the center console toward the red H direction, and set it above 23°C to get warm air. Here's the key point—never press the A/C button with the snowflake icon, as that's for cooling. If you're too lazy to adjust the fan speed, pressing the AUTO button near the steering wheel for automatic temperature control is the most hassle-free option, and it can be used in conjunction with the seat heating function on cold days. When you first turn on the heater, it's recommended to select the recirculation mode for faster warming, but remember to switch to external circulation after a while, otherwise the windshield is prone to fogging up.

Was this review help?
15
Share
Expand All
AngelaMarie
09/29/2025, 02:01:14 AM

The heating system in the Song Plus operates using waste heat from the engine, unlike the air conditioning which requires a compressor. If the windshield is frosted in the morning, I usually start the vehicle remotely to warm it up for about ten minutes before driving. It's best to wait until the engine coolant temperature rises before turning on the heater, and setting the temperature directly above 26°C works most effectively. The fan icon on the air conditioning panel controls the airflow speed—setting it to level three or four in winter is sufficient, as higher speeds can dry out the air too much. Adjust the vent direction to blow downward; warming the feet makes the whole body feel comfortable. If you have children in the back, remember to increase the temperature of the rear vents separately. Also, if you use the heater frequently, make sure to replace the cabin air filter regularly to avoid a dusty smell from the vents.

Was this review help?
8
Share
Expand All
DeOwen
11/12/2025, 02:54:24 AM

Last time my friend was shivering from the cold in my car, turns out he didn't know how to operate the heating in a new energy vehicle. The operation is actually quite intuitive: After starting the vehicle, find the temperature number on the left side of the center console screen, tap the upward arrow to adjust it to around 25°C. Physical buttons are even simpler - just turn the round temperature control knob to the red zone. Special note: Hybrid versions heat up faster in winter when using HEV mode. Don't worry if there's a slight plastic smell from the vents initially, it's normal for new cars. If the windows fog up, switch to defog mode for two minutes and it'll clear right up. I've driven this car through three winters now, and the heating system has never given me any trouble.

Was this review help?
7
Share
Expand All
VonEthan
01/02/2026, 09:49:10 PM

Tips figured out during sub-zero temperatures in the north: Turn on the seat heater first thing in the morning while directly rotating the AC temperature knob to the maximum 28°C. No need to press any extra buttons – warm air will start blowing within 2-3 minutes. Remember to turn off the A/C switch icon on the central display to avoid wasting fuel by mixing cold air. Medium fan speed works best as high speed may draw odors from the engine compartment. Using external circulation during rain/snow combined with mirror defogger is particularly effective to prevent side window frost. Monthly coolant level checks are recommended to ensure proper heat exchange system operation.

Was this review help?
4
Share
Expand All
StBryce
03/30/2026, 10:33:40 PM

I used to worry about the fuel consumption of the heater when driving a gasoline car, but after switching to the Song Plus, I found that the electric air conditioning is much more efficient. The most convenient operation is to press the AUTO button on the central console and set the temperature between 23-26°C. It's important not to turn on the heater immediately after starting; wait until the power battery warms up for better performance. For airflow, it's recommended to choose the combination mode of foot vents + windshield defroster, which keeps your feet warm and prevents window fogging. During long trips, it's fine to sleep with the heater on, as the system automatically switches between internal and external air circulation. During regular maintenance, ask the technician to clean the air conditioning ducts to improve heating efficiency. Before parking in winter, turn off the AC and switch to external circulation five minutes in advance to reduce moisture and mold in the ducts.

Was this review help?
2
Share
Expand All
More Q&A

How to Deal with Jing B Motorcycles Entering the Fourth Ring Road?

Jing B license plate motorcycles entering the Fourth Ring Road of Beijing will be penalized by traffic police with 3 demerit points on the driver's license and a fine of 100 yuan. The details are as follows: 1. Penalty: According to traffic regulations, Jing B and out-of-town license plate motorcycles entering roads within the Fourth Ring Road are considered a violation of prohibition sign instructions. If a motor vehicle is driven without following traffic signs or markings, the driver will be fined 100 yuan and receive 3 demerit points. 2. Beijing Entry Permit: The main roads of Beijing's Second, Third, Fourth, and Fifth Ring Roads prohibit motorcycle traffic. For out-of-town license plate motorcycles, no Beijing Entry Permit will be issued, meaning they cannot enter Beijing. For any out-of-town motorcycle entering Beijing, a Beijing Entry Permit is required. Out-of-town vehicles with the permit are strictly prohibited from entering within the Fifth Ring Road during peak hours.
104
Share

What is the penalty for a Jing B motorcycle entering the Fourth Ring Road?

If a motorcycle with a Jing B license plate enters the area within Beijing's Fourth Ring Road, traffic police will penalize the driver with a 3-point deduction on their driving license and a fine of 100 yuan. Relevant details are as follows: 1. Relevant regulations: According to traffic road regulations, motorcycles with Jing B or other provincial license plates entering roads within the Fourth Ring Road constitute a violation of prohibition sign instructions. During the process of driving a motor vehicle, if the driver does not follow the instructions of traffic signs or markings, they will be fined 100 yuan and receive a 3-point penalty. 2. Motor vehicles: Similar to motorcycles, when driving a motor vehicle, if encountering a no-entry sign, one must not force their way through, as this will result in a violation. In such cases, not only will points be deducted and fines imposed, but the traffic police will also provide criticism and education.
119
Share

What is the function of the car air conditioner ION?

ION refers to the air purification function. When ION is activated, the air purifier starts working. The new ION system mainly consists of two components: a PM2.5 sensor and a negative ion generator. The specific introduction is as follows: 1. PM2.5 sensor: Its function is to measure the PM2.5 content in the air inside and outside the car, serving as the basis for whether to automatically activate ION and displaying the measured PM2.5 concentration on the car's screen. This sensor is installed inside the vehicle's dashboard, to the right of the blower and on the right front A-pillar. 2. Negative ion generator: It boosts the 12V low voltage to hundreds of volts of high voltage, ionizing the air to form negative ions for air purification, dust removal, deodorization, and sterilization. It is installed between the blower and the evaporator.
104
Share

How to Clean a Car Engine?

After prolonged use, carbon deposits, dust, and oil buildup inside the engine require both internal and external cleaning. External cleaning is relatively simple and can be done by yourself, while internal cleaning mostly involves the use of additives. Here are the specific steps: 1. Use car cleaning agents to reduce carbon deposit formation: Carbon deposits form due to impurities in gasoline. Using higher-purity gasoline can reduce carbon deposit formation. Some car cleaning agents can also activate the carbon particles formed on metal surfaces. 2. Regularly clean the car’s intake system: Performing necessary cleaning on the car’s intake system can effectively reduce carbon deposit formation. Therefore, owners should clean the intake system every 30,000 kilometers or so.
112
Share

How many times can Subject 3 be scheduled?

You can schedule Subject 3 up to five times, with two attempts allowed for each scheduled session. The driving test content is as follows: 1. Subject 1: Theoretical test. It covers traffic rules, road sign recognition, safe driving guidelines, etc. Reading a designated book thoroughly is usually sufficient to pass, and online mock tests are also available for reference. 2. Subject 2: Field test. The main components include single-plank bridge, S-curve, parallel parking, hill start and stop, and reverse parking. 3. Subject 3: Road test, which simulates actual driving. Key components include proper use of lights, gear shifting, correct responses to various road conditions, lane changes, etc., culminating in pulling over to the side of the road. 4. Subject 4: Theoretical test, focusing on case analysis during driving and road traffic rules, which is relatively simple.
104
Share

How to connect a motorcycle DC igniter?

There are a total of two wires that need to be connected for the igniter, while the others can simply be plugged in. The details are as follows: 1. Function of the wires: Connect the blue wire to the neutral line, and the red/white wire to the relay of the live wire. The remaining wires can be plugged in directly. The DC igniter does not require connection; it can be used by simply plugging it in. For the engine's five wires: the black wire is the stator ignition coil of the magneto, which connects to the two-pin socket of the igniter. The blue/white and green/white wires are the stator trigger coils, which connect to the four-pin socket of the igniter. The red (likely pink) and yellow wires are the lighting coils, which connect to the rectifier. 2. Two sets of plugs: For the igniter's two sets of plugs, the one with two wires—one connects to the magneto ignition coil (i.e., the black/red wire), and the other connects to the kill switch wire of the ignition switch, usually a black/white wire, which grounds to the frame. When the key is turned off, it connects to the black/red wire to short-circuit and kill the engine. For the four-pin plug end, apart from the two wires connecting to the magneto trigger coils (blue/white and green/white), one connects to the high-voltage coil (usually a black/yellow wire), and the other is the ground wire, usually green.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.