···
Log in / Register

How to Turn on the Heater Air Conditioning?

1 Answers
RyderAnn
07/30/25 2:57am
To turn on the heater air conditioning, follow these steps: adjust the air circulation mode to internal circulation, turn the cold/hot air switch to the red zone, set the blower speed to a suitable level, and adjust the air vent direction. The car air conditioning system is designed to regulate and control the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to maintain optimal conditions. Functions of the car air conditioning system: 1. Achieve cooling effect through the continuous phase change cycle of the refrigerant; 2. Remove dust, odors, smoke, and toxic gases from the air inside the car, freshen the air, and humidify the cabin air to increase relative humidity.
Was this review help?
19
1
Share
More Forum Discussions

Can the throttle be used in Subject 2 uphill driving?

There are two versions of the hill start in Subject 2, as detailed below: 1. No-throttle version: After stopping at the designated point, turn on the turn signal, slowly release the clutch with your left foot (to the semi-engaged state), at which point the car body will shake. Hold the clutch steady without releasing it further, and once stabilized, directly release the foot brake, allowing the car to move uphill. 2. Throttle version: Similarly, first press the clutch with one foot and the brake with the other, then slowly release the clutch with your left foot until the car body shakes and reaches the semi-engagement point, pausing the clutch release action. After evenly releasing the brake with your right foot, lightly press the throttle. When the tachometer shows around 1000 RPM, release the handbrake, gently press the throttle, and you can directly drive to the top of the slope before fully releasing the clutch.
1
2
Share

How often should the Vitara's cabin air filter be replaced?

Vitara's cabin air filter is generally replaced once a year or every 10,000 kilometers, but the specific replacement interval actually depends on the vehicle usage conditions. The cabin air filter ensures the filter tightly fits the housing to prevent unfiltered air from entering the cabin; it separates solid impurities such as dust, pollen, and abrasive particles from the air. Relevant information about the Vitara is as follows: 1. The Vitara is positioned as a compact SUV, making its debut at the 2014 Paris Motor Show, with the domestic version to be launched by Changan Suzuki. The new vehicle's dimensions are 4175/1775/1610mm in length/width/height, with a wheelbase of 2500mm, basically consistent with the overseas version. 2. Exterior design: The headlights and grille adopt the most popular integrated design concept in current automotive styling, combined with the Vitara family's classic clamshell-style hood, highlighting its resolute and domineering character; the downward-extending inverted trapezoidal front skid plate conveys Vitara's relentless conquering spirit. 3. Performance: In terms of performance, the Vitara has undergone comprehensive evolution while inheriting the family genes. The agile design with golden ratio body, the unique built-in trapezoidal chassis, the class-exclusive ALLGRIP intelligent full-time four-wheel drive, and the 1.4T BOOSTERJET turbocharged engine not only give the Vitara superior passability, handling, and power compared to its peers but also achieve the best levels in space comfort and fuel economy.
9
5
Share

What Are the Installation Standards for Tesla Charging Stations?

Tesla charging station installation standards consist of two main aspects: safety requirements and environmental condition requirements. The details are as follows: 1. Safety Requirements: (1) A substation should be equipped with safety railings, warning signs, safety signal lights, and alarm bells. (2) A "Danger, High Voltage" warning sign must be hung outside the door of the high-voltage power distribution room and transformer room or on the safety railings of the substation. The warning sign must face outward from the railings. (3) High-voltage power distribution equipment should have clear operational instructions. Grounding points of the equipment should be marked visibly. (4) Indoor areas should have clear "Safety Passage" or "Emergency Exit" signs. 2. Environmental Requirements: (1) Operating environment temperature: -20℃ to +50℃. (2) Relative humidity: 5% to 95%. (3) Altitude: ≤1000m. (4) Installation location: Outdoor.
19
0
Share

What is the function of an air energy compressor?

An air energy compressor has the following functions: 1. Air energy compressor: It operates according to the "reverse Carnot" principle, which is the reverse Carnot cycle principle. The compressor compresses the refrigerant, and the compressed refrigerant with elevated temperature passes through the condenser in the water tank to produce hot water. After heat exchange, the refrigerant returns to the compressor for the next cycle. In this process, the heat from the air is absorbed by the evaporator and transferred to the refrigerant, which is then transferred to the water. 2. Air conditioning compressor: The compressor compresses the gaseous refrigerant into a high-temperature and high-pressure gaseous refrigerant, which is then sent to the condenser (outdoor unit) to dissipate heat and become a normal-temperature and high-pressure liquid refrigerant. It then passes through the capillary tube and enters the evaporator (indoor unit). As the refrigerant moves from the capillary tube to the evaporator, the space suddenly increases, and the pressure decreases, causing the liquid refrigerant to vaporize into a low-temperature gaseous refrigerant, thereby absorbing a large amount of heat. The evaporator then becomes cold, and the indoor unit's fan blows the indoor air through the evaporator.
18
4
Share

What does continuously variable transmission in a car mean?

Continuously variable transmission refers to the type of transmission drive. A continuously variable transmission is called a CVT transmission. This transmission does not have gears inside; instead, it transmits power through a pressure plate and steel belt connection. The power output is linear without gears, so there is no gear shift shock. The following are the characteristics of continuously variable transmission: 1. Configuration: The steel transmission chain used in continuously variable transmission does not rely on gear shifting, allowing it to transmit strong power during speed changes while maintaining high torque, minimizing power loss, wear, and noise. 2. Structure: The structure of continuously variable transmission is simpler than that of traditional transmissions and is more compact. It neither has the numerous gear pairs of manual transmissions nor the complex planetary gear sets of automatic transmissions. 3. Fuel consumption: The most notable feature of continuously variable transmission is its fuel efficiency. It eliminates the energy-wasting hydraulic transmission device of traditional automatic transmissions and adopts new technology to improve fuel utilization. Additionally, the fuel utilization rate of continuously variable transmission is higher than that of automatic transmissions, saving 5% to 15% more fuel compared to traditional automatic transmission cars.
7
0
Share

What is the actual lifespan of the Roewe i5 CVT transmission?

CVT continuously variable transmissions currently have an actual service life of up to 300,000 kilometers. Advantages and disadvantages of CVT transmissions: 1. Advantages: (1) The power output of CVT transmissions is linear, resulting in exceptionally smooth operation during actual driving. (2) Gear ratios can be set more freely, making it easier to achieve the balance between gear ratios, speed ratios, performance, fuel consumption, and exhaust emissions in traditional transmission systems. (3) The mechanical efficiency and fuel economy of CVT transmissions are significantly better than those of conventional automatic transmissions, second only to manual transmissions, offering much better fuel efficiency. 2. Disadvantages: (1) The maintenance cost of CVT transmissions is relatively high, and improper operation can lead to a higher probability of issues. (2) CVT transmissions have limited torque capacity; most CVT transmissions cannot handle heavy loads and are only suitable for small cars with engine displacements around 1 to 1.5 liters.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.