How to Turn On the Heated Mirrors in a Lynk & Co?

1 Answers
HadleyAnn
07/29/25 10:05pm
The method to turn on the heated mirrors in a Lynk & Co is: locate the fourth button below the central control screen, which features a small icon with three upward-pointing arrows, and press this button to activate the heating. Models under the Lynk & Co brand include the Lynk & Co 03, Lynk & Co 05, Lynk & Co 01, Lynk & Co 02, and Lynk & Co 06, among others. Taking the Lynk & Co 03 as an example, its body dimensions are: length 4639mm, width 1840mm, height 1472mm, with a wheelbase of 2730mm. The Lynk & Co 03 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW at 5000rpm, and a maximum torque of 245Nm between 1450 to 4000rpm.
Was this review help?
20
2
Share
More Forum Discussions

How to Drive an Automatic Dual-Clutch Transmission?

Starting method for automatic dual-clutch transmission: Press the brake, then shift into N gear to start. After starting, shift into D gear, release the brake, and press the accelerator to begin moving. Dual-clutch transmission differs from other automatic transmission systems. It is based on a manual transmission but belongs to the automatic transmission category. In addition to the flexibility of a manual transmission and the comfort of an automatic transmission, it also provides uninterrupted power output. The dual-clutch in a car is located between the engine and the transmission. It is a transmission mechanism that can both transmit and cut off power. Its main function is to ensure smooth starting of the car, reduce the impact load on the transmission gears during gear shifting, and prevent overload of the transmission system.
9
2
Share

What to Do When a Tire Suddenly Blows Out on the Highway?

In the event of a sudden tire blowout on the highway, follow these steps: 1. Maintain control of the steering and gradually reduce speed; 2. Gradually move the vehicle to the right and come to a stop; 3. Quickly place a warning triangle 100 meters behind the vehicle; 4. Replace the tire with the spare and leave the highway promptly. Causes of tire blowouts include: 1. Air leakage in the tire; 2. Excessive tire pressure; 3. Insufficient tire pressure; 4. Severe tire wear. Tire maintenance methods are: 1. Regularly remove debris from tire treads; 2. Check tire pressure periodically; 3. Inspect tire wear and replace them in a timely manner; 4. Repair punctures promptly; 5. If any abnormalities are noticed while driving, stop immediately to check the tire condition.
13
0
Share

How to Replace the Key Battery for the New Mercedes-Benz ML350?

The method to replace the key battery for the new Mercedes-Benz ML350 is as follows: 1. Push the sliding latch on the key upwards to remove the mechanical key; 2. Use the mechanical key to pry open the outer shell of the key; 3. Remove the old battery from the key and replace it with a new one. Taking the 2015 Mercedes-Benz ML350 as an example, it is a 5-door, 5-seat SUV with body dimensions of: length 4844 mm, width 1926 mm, height 1796 mm, and a wheelbase of 2915 mm. The 2015 Mercedes-Benz ML350 is equipped with a 3.0T turbocharged engine, delivering a maximum horsepower of 258 hp, a maximum power of 190 kW, and a maximum power speed of 3600 rpm.
15
5
Share

What does the CVT continuously variable transmission on a sedan refer to?

CVT continuously variable transmission does not have specific gears. In operation, it is similar to an automatic transmission, but the variation in speed ratio differs from the gear-shifting process of an automatic transmission. Instead, it is continuous, ensuring smooth and uninterrupted power delivery. Below are some relevant details: 1. In a CVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft connects to the small pulley, which drives the large pulley through the steel belt. 2. The secret lies in the special pulley: The construction of the CVT's transmission pulley is quite unique, divided into movable left and right halves that can move closer together or apart. The conical discs can tighten or loosen under hydraulic pressure, squeezing the steel belt to adjust the width of the V-shaped groove. When the conical discs move inward and tighten, the steel belt is pushed outward (centrifugally) by the pressure of the discs. Conversely, it moves inward when the discs loosen.
6
1
Share

What is the first maintenance time for a new car?

The first maintenance for a new car should be done within 3 to 5 months. The maintenance items for the first service include: 1. Changing the engine oil, oil filter, gasoline filter, and air filter; 2. Checking the level of the car's coolant; 3. Checking the levels of the brake and clutch fluids; 4. Checking the oil level in the power steering reservoir and inspecting the connections of all oil pipes; 5. Checking the battery fluid level and the level of the windshield washer fluid, among other aspects. The purpose of maintenance is to keep the car clean and tidy, ensure the vehicle's technical condition is normal, eliminate potential hazards to prevent faults, slow down the deterioration process of parts, and extend the service life. Precautions for maintenance include: 1. Avoid running the engine for a long time in an unventilated garage; 2. Avoid sucking oil pipes with your mouth; 3. Avoid getting carburetor cleaner on the car body.
1
3
Share

What to Do When the Hazard Lights Won't Turn Off?

When the hazard lights won't turn off, the solutions are: 1. Check if the hazard light relay is functioning properly; 2. Simply remove the hazard light fuse. Hazard lights, commonly known as emergency flashers or warning lights, are signal lights used to alert other vehicles and pedestrians that the car is experiencing a special situation. The reasons why hazard lights won't turn off include: 1. The hazard light switch is damaged; 2. There is an issue with the circuit. Situations where hazard lights should be used in a car include: 1. When the vehicle breaks down; 2. Breakdown on the highway; 3. When towing a faulty vehicle; 4. Encountering sudden heavy rain while driving; 5. Transporting critically ill patients; 6. Experiencing an urgent malfunction while driving; 7. When temporarily parked on the road.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.