How to turn on the headlights of BYD F3?

1 Answers
McTalia
07/30/25 5:07am
Method to turn on the headlights of BYD F3: Turn the left lever once to turn on the width lights, turn it twice to turn on the low beam plus width lights, push it down to turn on the high beam, and pull it up to flash the high beam momentarily. The fog light switch is located on the small control panel on the left side, which is a long button. There are two types of car light switches: one is a rotary lever switch, and the other is a rotary knob switch. The BYD F3 is an A+ class passenger car produced by BYD Auto, with a length, width, and height of 4533 mm, 1705 mm, and 1490 mm respectively, and a wheelbase of 2600 mm. In terms of active safety, the BYD F3 is equipped with four-wheel ABS plus EBD and uses four-wheel disc brakes. For passive safety, it is equipped with front dual airbags and front pre-tensioned and rear ordinary seat belts.
Was this review help?
17
5
Share
More Forum Discussions

What is the reason for BYD's alarm to keep ringing?

BYD's alarm keeps ringing due to a faulty door contact switch, which can also cause the alarm to sound. It is necessary to go to a repair shop for maintenance. The sensitivity of the anti-theft sensor is too high. There is a sensitivity adjustment knob on the anti-theft vibration sensor, which can be fine-tuned. Alarm working principle: When the sensor is struck or shaken, the ball inside the chamber will roll. When it rolls away from a smaller secondary electrical contact element, the circuit formed by this secondary electrical contact element and the central electrical contact element will be disconnected. Controller ball displacement: At this time, the switch will open, indicating that the controller ball has been displaced. As the ball continues to roll past other secondary electrical contact elements, the circuit will repeatedly close and open until the ball finally stops rolling.
3
5
Share

Can the BYD Han DM be used without charging?

Han DM hybrid cannot be used without charging. Because the Han DM hybrid is a plug-in hybrid, unlike a conventional hybrid, it requires external charging to replenish its electrical energy. Its technology primarily allows for external charging, enabling it to drive in pure electric mode. Once the battery is depleted, it switches to hybrid mode (primarily using the internal combustion engine) and recharges the battery as needed. Based on the connection method of hybrid power drive, hybrid vehicles are generally divided into three categories: Series Hybrid Electric Vehicle (SHEV): Mainly consists of an engine, generator, and drive motor, which are connected in series to form the HEV power system. Parallel Hybrid Electric Vehicle (PHEV): Both the engine and the drive motor serve as power units. The power outputs of these two units can be combined or used separately. Power-Split Hybrid Electric Vehicle (PSHEV): Combines the structures of series and parallel hybrids to form an electric vehicle, mainly composed of an engine, electric generator, and drive motor as the three major power units.
12
0
Share

What are the official crash test results of the BYD Han?

The BYD Han has achieved excellent crash test scores. The occupant protection tests included full frontal impact, 40% offset frontal impact, side impact, and whiplash tests. Overall, the BYD Han EV demonstrated outstanding performance with a score rate of 94.3%. Combined with a 95.62% score rate in the full frontal impact test, although there is room for improvement in areas such as body design, the actual performance of the BYD Han EV remains commendable. More test results are detailed below: 40% offset frontal impact test: Next is the 40% offset frontal impact test, where the BYD Han EV achieved a score rate of 92.20%. In the whiplash test, the BYD Han EV lost more points in the NIC (Neck Injury Criterion) category, indicating that in real-world scenarios, occupants' necks could sustain significant injuries in a collision. Pedestrian protection test: In the pedestrian protection test, the BYD Han EV scored 69.78%, placing it in the upper-middle range compared to other models tested during the same period.
1
4
Share

How Long Does It Take to Order a BYD Han?

It takes about two weeks to order a BYD Han. Before placing an order, you should understand the different models and configurations. Test Drive and Price Negotiation: Visit a 4S store to see the car and request a test drive if conditions permit. At the same time, negotiate the car price with the salesperson. Based on a preliminary understanding of the new car's price and availability, agree on specific purchase costs and delivery time with the salesperson. Vehicle Inspection Procedures: At this stage, it's best to be meticulous. You can drive the car away, but the insurance may not take effect until the next day. The invoice can serve as a temporary license plate. You can handle the vehicle inspection and registration yourself or ask the 4S store for assistance. Required Materials: Apply for a moving permit, pay the additional purchase tax, provide 2 copies of the original invoice and its photocopy, 1 copy of the original qualification certificate and its photocopy, and 1 copy of the original ID card and its photocopy. Collect the vehicle purchase additional tax payment certificate and payment receipt.
5
0
Share

What is the fuel consumption of the BYD Qin 80?

The actual fuel consumption of the BYD Qin 80 plug-in hybrid is approximately 7.2 liters per 100 kilometers. The main factors affecting fuel consumption include the following reasons: Unnecessary increase in vehicle load: Many new car owners tend to load their vehicles with various decorations and exterior accessories, and some even move their office and home into the car. Blindly installing body kits, spoilers, winches, and roof racks can also increase the vehicle's fuel consumption. Frequent braking and starting: Apart from the vehicle's design and engine factors, the real waste of fuel comes from the driver's habits. Frequent sudden braking and rapid acceleration are the biggest causes of increased fuel consumption. An experiment once showed that the same car driven by different drivers resulted in the novice driver's fuel consumption being twice as high as that of an experienced driver. This demonstrates how important good driving habits are for saving fuel.
2
5
Share

Which company owns BISU Auto?

BISU Auto is owned by Chongqing BISU Automobile Co., Ltd., located in Tianding Industrial Park, Chongqing, China. Its product lineup covers multiple segments including MPVs, SUVs, sedans, and new energy vehicles. The BISU T3 is equipped with a four-spoke multifunction steering wheel, a 9-inch LCD screen, and comes standard with features such as electronic stability control, front and rear disc brakes, parking sensors, and a rearview camera. The BISU T3 has a body length, width, and height of 4350mm, 1825mm, and 1685mm respectively, with a wheelbase of 2565mm. The vehicle features front-wheel drive and is powered by an engine with a maximum power output of 98kW and a maximum torque of 185Nm.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.