How to Turn on the Headlights of a Lavida?

1 Answers
SanSawyer
07/29/25 7:31pm
The method to turn on the headlights of a Lavida is as follows: 1. The headlight switch of the Lavida is located on the left side of the steering wheel's combination switch. There are two gears for turning on the headlights: turning forward once activates the parking lights, and turning forward twice activates the headlights. Pushing the lever upward turns on the right turn signal, while pushing it downward turns on the left turn signal. Pushing the lever to the right activates the high beam, and pulling it back turns off the high beam, switching to the low beam. 2. Rotate the knob to position 1 to turn on the rear fog lights, and the rear fog light indicator on the dashboard will illuminate; rotate the knob to position 2 to turn on the front fog lights, and the front fog light indicator on the dashboard will illuminate. 3. Turn the knob to position 3 to activate the width marker lights, which can be used in conjunction with the vehicle's hazard lights in emergency situations.
Was this review help?
9
0
Share
More Forum Discussions

How to Solve the Jerking and Abnormal Noise of Dual-Clutch Transmission?

By using hydraulic cylinders to push the clutch plates for friction, vibration is reduced, thereby minimizing jerking. Optimize the shifting logic of the dual-clutch transmission to enhance the precision of torque transmission and separation position control.
5
0
Share

How to Adjust the Seats in the Buick GL8?

Move the seat position switch forward or backward to adjust the seat's position. Lift or press down to raise or lower the seat. Simply press the lumbar support adjustment button to adjust the height of the lumbar support. The seat's lumbar wrapping can be adjusted to prevent excessive movement of the driver during aggressive driving. The operation method is the same as the front and rear seat control buttons—simply push forward or backward to adjust.
8
2
Share

How to align the timing chain on a Xiali N5?

When aligning the timing chain on a Xiali N5, simply match the marked points. There are markings on the chain. It utilizes the independently developed CA4GA1 engine with optimal balanced performance. The exterior features a completely new design.
8
3
Share

How to Turn on the Santana's Air Conditioning?

1. You can choose any of the 1, 2, 3, or 4 fan speed settings. 2. Press the A/C switch located below the fan switch once to activate it, and the indicator light will illuminate. 3. Turn the temperature control knob to the lowest blue setting for cooling. 4. For heating, simply turn on the fan and adjust the temperature control knob to the red side.
2
1
Share

How to Remove the 4S Dealership Emblem from the Rear of the Car?

(You can use discarded bank cards, IC cards, or other plastic cards as substitutes) Gently insert the plastic card from the edge of the metal emblem and slowly separate the metal emblem from the car body surface. Allow the adhesive remover to fully penetrate the double-sided tape in the bonding layer of the metal emblem. Drip more adhesive remover into the bonding layer along the plastic scraper, letting it fully react with the double-sided tape, then continue inserting the plastic scraper.
4
4
Share

What does Mercedes-Benz 4MATIC mean?

4MATIC is Mercedes-Benz's four-wheel drive technology. The core technology of Mercedes-Benz 4MATIC four-wheel drive is the 4ETS differential limiting technology. 4ETS utilizes the automatic braking force distribution function of ABS to achieve differential limiting. The following is an introduction to four-wheel drive technology: 1. When a wheel of a full-time four-wheel drive vehicle slips, the onboard computer uses ABS to brake the slipping wheel to limit its spinning. 2. The differential can then transfer the power intended for the slipping wheel to other non-slipping wheels.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.