···
Log in / Register

How to turn on the headlights of a Haval H2?

4 Answers
LaLouis
07/29/25 6:37pm

The method to turn on the headlights of a Haval H2 is: 1. After the vehicle is powered on, rotate the light switch knob to the low beam position to turn on the low beams; 2. Locate the light control lever on the left rear side of the steering wheel, then pull it toward the driver to turn on the high beams. Taking the 2018 Haval H2 manual two-wheel drive fashion model as an example, its body dimensions are: length 4365mm, width 1814mm, height 1710mm, wheelbase 2560mm, and fuel tank capacity 50l. The 2018 Haval H2 manual two-wheel drive fashion model is equipped with a 1.5l turbocharged engine, with a maximum power of 110kw and a maximum power speed of 5600 to 6000 rpm per minute.

Was this review help?
14
4
Share
StSpencer
08/14/25 11:52am

Turning on the headlights of the Haval H2 is quite simple. When you're seated in the driver's seat, look to the left of the steering wheel, where there's a control lever. Gently twist or turn it to the designated position to turn them on. There's usually a low beam symbol marking the spot—just twist it there to light them up. If you're driving at night or in rainy conditions, remember to turn on the headlights promptly to improve visibility and ensure safety, which is a basic driving rule. Another convenient feature is the automatic headlight mode—just set it to AUTO, and the vehicle will turn the lights on or off based on the light intensity, making it hassle-free and safe. However, it's good to familiarize yourself with the controls when parked to avoid any confusion while driving. The lighting system in SUVs like the Haval H2 is quite user-friendly, and it's even better to check the fuses or wiring during maintenance to ensure everything's in order.

Was this review help?
12
3
Share
Expand All
RichardMarie
10/14/25 7:14am

The headlights of the Haval H2 are primarily operated through the control lever on the left side of the steering wheel. After locating the lever, rotate it to the low beam position to turn on the headlights. It's recommended to practice rotating the lever while parked to get a feel for it and avoid distractions while driving. Some versions feature an automatic headlight function—select AUTO for it to intelligently activate based on ambient light. Driving safely is crucial, especially at night or in rainy/foggy conditions, so remember to turn on the lights promptly without delay. If the headlights don't turn on, don't panic—first check if the control lever is in the correct position and whether the fuse is blown. Address any issues with early repairs. Regular vehicle maintenance of lighting-related components is essential to prevent malfunctions that could affect driving.

Was this review help?
11
3
Share
Expand All
DeSabrina
11/27/25 8:09am

The control stalk on the left side of the steering wheel is the key. You twist it to turn on the lights, usually positioned at the low beam setting. Remember, using lights during rain or at night is super helpful for safety – new drivers will get the hang of it after a few tries. The Haval H2 might come with automatic headlights; just set it to AUTO and let the car handle the operation. Occasionally check the lighting system to ensure bulbs aren't burnt out and fuses are intact – driving with peace of mind means driving safely.

Was this review help?
4
2
Share
Expand All
More Forum Discussions

What are the troubleshooting methods for unstable car idling?

Car idling instability can be addressed through the following methods: 1. Check for air leaks in the intake pipe, PVC valve hose, and oil dipstick area. 2. Inspect whether the air filter element is excessively dirty. 3. Verify the proper functioning of the cold start injector and temperature-time control switch. 4. Check if the fuel system pressure is too low. 5. Examine the injector spray pattern. 6. Inspect cylinder compression and valve clearance. 7. Check the ECU (Engine Control Unit). 8. Replace electrical components. If the engine operates normally at medium to high speeds but exhibits unstable idling or even stalls at idle or near-idle speeds, this indicates an idling malfunction.
18
2
Share

What does vehicle EDC mean?

Vehicle EDC refers to the high-pressure electronic injection system and electronic control unit. If the EDC warning light is on, it indicates a fault in the engine's electronic control system, and the vehicle needs to be taken to a repair shop. This function is controlled by an OFF button. To reactivate this function, simply restart the vehicle, and it will be enabled by default. The operation method for using EDC is as follows: 1. Press the brake pedal of the car; 2. Press the one-touch start button of the car; 3. The car's dashboard lights up, and the vehicle's power is turned on; 4. Press the OFF button inside the car to deactivate this function. This function is also known as the anti-skid function, and the car's electronic damper control system is also called EDC.
2
0
Share

Is the spare tire of the 2011 Tiida full-size?

2011 Tiida's spare tire is full-size, meaning it has the same dimensions as the four main tires. The body dimensions of the 2011 Tiida are: length 4295mm, width 1760mm, height 1520mm, wheelbase 2700mm, minimum ground clearance 167mm, and fuel tank capacity 52 liters. The 2011 Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 93kW and a maximum torque of 154Nm, paired with a 5-speed manual transmission. It features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
10
4
Share

What is the normal charging current for a car battery?

Car battery charging current is normal between 14 to 15 volts, and the charging methods are as follows: 1. Use the battery jump-start method for charging; 2. You can use a battery charger to charge the battery. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Precautions for charging a car battery include: 1. In cold weather, check whether the electrolyte is frozen before charging, and do not charge a frozen battery; 2. Check the electrolyte level before charging, and do not charge if the electrolyte is insufficient; 3. During charging, measure the density and voltage of the electrolyte approximately every hour, and check its temperature; 4. Ensure the charging area is well-ventilated and strictly prohibit open flames; 5. Stop charging when unattended.
7
3
Share

How to Turn On the Fog Lights on the Buick Excelle?

To turn on the fog lights of the Buick Excelle, rotate the knob switch on the left side of the instrument panel to the front and rear fog light positions. The Buick Excelle is a compact 4-door, 5-seater sedan with the following body dimensions: length 4609mm, width 1798mm, height 1486mm, and a wheelbase of 2640mm. It is equipped with a 1.3T turbocharged engine delivering a maximum power of 120 kW and a maximum torque of 230 N·m. The vehicle features a front-wheel-drive layout, with a MacPherson strut independent front suspension and a multi-link independent rear suspension.
8
1
Share

Where is the license plate from?

This license plate is from Guizhou Province. 'Gui' is the Chinese abbreviation for Guizhou Province. The local license plate codes for Guizhou Province are: Gui A for Guiyang, Gui B for Liupanshui, Gui C for Zunyi, Gui D for Tongren, Gui E for Qianxinan Prefecture, Gui F for Bijie, Gui G for Anshun, Gui H for Qiandongnan Prefecture, Gui J for Qiannan Prefecture, and Gui F for Bijie City. License plates, also known as vehicle registration plates, are plates affixed to the front and rear of a vehicle. They are made of materials such as aluminum, sheet iron, plastic, or paper. The primary purpose of a license plate is to identify the region to which the vehicle belongs, and it can be used to trace the vehicle's owner and registration information.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.