How to Turn on the Headlights of a BMW 5 Series?

What lights should be turned on when temporarily parking a car?

During the day, no lights are required for temporary parking of a car. At night, temporary parking requires turning on the hazard warning flashers, clearance lights, and rear position lights. Hazard warning flashers, commonly referred to as emergency lights or hazards, are signal lights that alert other vehicles and pedestrians to pay attention to the special situation of the vehicle. Clearance lights are the outermost lights at the front and rear of the vehicle. Front and rear position lights, commonly known as parking lights or width markers, are also called side marker lights. Temporary parking refers to a brief stop on the right side of the road in the direction of traffic on a non-prohibited parking road surface, with the driver not leaving the vehicle. Regarding the temporary time concept, there is no specific duration defined; as long as the driver does not leave the vehicle during the brief stop, it is considered temporary parking.

6

5

Share

Which Tayron models are equipped with a particulate filter?

Tayron complies with the China VI emission standards. The Tayron 380 models do not have a particulate filter, while all other models are equipped with one. A particulate filter is a ceramic filter installed in the diesel engine emission system, designed to capture particulate emissions before they enter the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipeline. The densely arranged bag-type filters inside capture the carbon particles on a metal fiber mat filter. When the accumulation of particles reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check whether your Tayron is equipped with a particulate filter, you can use the following three methods: 1. Refer to the and to see if the particulate filter function is mentioned. Additionally, check the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. 2. Check the label on the oil filler cap. If it clearly states 0W-20 grade oil, it indicates the presence of a particulate filter. 3. Inspect the exhaust pipe behind the catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter.

10

5

Share

How Many Years Without Review Will a Driver's License Be Revoked?

For Class A or B licenses, they will be revoked if not reviewed for over 3 years. For other types of driver's licenses, annual review is not required by regulations; only one review is needed when renewing the license upon expiration. Additionally, licenses will also be revoked if not renewed within one year of expiration. The driver's license review or renewal can still be processed if the expiration time does not exceed one year. However, if the expiration time exceeds one year, the license will be revoked by the vehicle management office. For licenses revoked for no more than two years, the driver can apply to retake the subject one exam at the vehicle management office. Upon passing the exam, the license's validity will be restored. According to the above regulations, the expiration time for driver's license review or renewal must not exceed three years at most. If the expiration time exceeds three years, the license will be permanently revoked and cannot be restored. Legal Basis: Article 19 of the Road Traffic Safety Law states that to drive a motor vehicle, one must legally obtain a motor vehicle driver's license. The application for a motor vehicle driver's license must meet the driving permit conditions stipulated by the public security department under the State Council. After passing the examination, the corresponding category of motor vehicle driver's license will be issued by the traffic management department of the public security organ. Those holding a foreign motor vehicle driver's license who meet the driving permit conditions stipulated by the public security department under the State Council and pass the assessment by the traffic management department of the public security organ may be issued a Chinese motor vehicle driver's license. Drivers must drive motor vehicles according to the vehicle types specified on their driver's licenses and must carry their motor vehicle driver's licenses when driving. No unit or individual other than the traffic management department of the public security organ may confiscate or detain a motor vehicle driver's license.

2

4

Share

What Causes Water Under the Car Carpet?

Water under the car carpet is typically caused by air conditioning leaks, windshield sealant failure, or a leaking heater core. Solutions: If the carpet is only slightly wet, you can use a cleaning agent to remove dust and dirty water from the carpet. For severe water ingress, it's necessary to remove the seats and lift the floor mat for thorough cleaning. Air conditioning drain clog: If the AC drain is blocked, condensation water cannot drain properly and may leak onto the carpet. Sunroof drain clog: Blocked sunroof drains can allow rainwater to flow into the cabin. Windshield sealant failure: When the windshield sealant fails, the car's sealing performance decreases, allowing rainwater to flow along the dashboard and onto the carpet during rain. Heater core leak: If there's water leakage in the front passenger area, check if the coolant level has dropped. A decrease in coolant indicates a leaking heater core that requires immediate repair. For water accumulation under the front passenger seat, remove the foot mat and floor covering, then clean with automotive carpet cleaner. Extract standing water from the vehicle. For severe cases, open the sealing plugs at the bottom of the car chassis to drain the water. After draining, clean and disinfect the car to prevent odors and bacterial growth. Finally, open the doors to dry all wet areas. Precautions: Do not completely immerse the carpet in water for scrubbing, as this may damage the bonding between different material layers inside the carpet and prolong drying time, affecting performance and causing interior dampness. If there's water leakage in the trunk, it's usually due to improperly fitted bottom rubber plugs. For loose weatherstrips, reattach them with special adhesive to restore sealing performance and prevent water leakage. For older cars, pay attention to weatherstrip aging. When peeling occurs, reattach using a waterproof adhesive called sealant, being careful not to pull excessively to avoid damage. If part of the weatherstrip is raised or twisted (a common entry point for rainwater), replacement may be necessary when severely deformed. Door perimeter leaks are mostly caused by damaged surrounding weatherstrips - check for breaks or peeling. For small loose sections that are hard to reattach, it's better to peel them off completely before reapplying to correct twisting or looseness. After reapplying weatherstrips, apply rubber protectant to restore elasticity.

3

Share

What brand is MileagePlus tires?

It is a Hankook Tire brand, the first tire company in South Korea, established in 1941. As the first tire manufacturer in Korea, it provides radial tires for passenger cars, light trucks (SUVs, RVs, etc.), trucks, buses, and special racing vehicles. Hankook has five R&D centers worldwide. Hankook tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high-low temperature effects during driving. Therefore, they must possess relatively high load-bearing performance, traction performance, and cushioning performance, while also requiring high wear resistance and flex resistance, as well as relatively low rolling resistance and heat generation. They are in direct contact with the road surface and work together with the car suspension to mitigate the impact during driving, ensuring good ride comfort and smooth driving, maintaining excellent adhesion between the wheels and the road surface, improving the car's traction, braking, and maneuverability, and bearing the weight of the car. Hankook Tire Maintenance: Increase awareness of tire safety and inspect tires more frequently. Regularly correct wheel balance. Unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Perform regular tire rotation. To ensure even wear across all tires on the same vehicle, rotate the tires every 5,000 kilometers. In daily use of Hankook tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread wears flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be potential hazards for tire blowouts at high speeds. Additionally, immediately remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires can easily overheat, and pressure may increase. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool down, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and emergency stops to prevent accelerated tread wear caused by dragging between the tires and the ground.

3

Share

What to Do When the Engine Malfunction Light Comes On After Refueling?

If the engine malfunction light comes on after refueling, it indicates that poor-quality fuel has been added. During the combustion process in the engine, due to the high impurity content and low combustion efficiency of poor-quality fuel, some impurities and unburned fuel accumulate in the combustion chamber, occupying space and causing the engine malfunction light to illuminate. Solution: Promptly drain the poor-quality fuel and clean the fuel tank and fuel lines. After cleaning, replace it with high-quality fuel. Apart from fuel quality issues, the engine malfunction light may also come on due to the following reasons: Sensor Malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, leading to the illumination of the engine malfunction light. Poor Combustion of Air-Fuel Mixture: Poor combustion of the air-fuel mixture can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Issues such as spark plug failure, ignition coil failure, fuel pump failure, or clogged fuel lines can all lead to poor combustion of the air-fuel mixture. Turbocharger Issues: Intake boost pipes and turbochargers can also cause the engine malfunction light to come on. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake Issues: If there are problems with the car's air intake, it may lead to clogged engine pipes, and in severe cases, the engine malfunction light will illuminate. A dirty air filter that is not cleaned regularly can cause intake problems. Exhaust Issues: Exhaust system malfunctions can also trigger the engine malfunction light. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing failure, with the catalytic converter being the most frequent culprit. The use of leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all easily lead to catalytic converter failure. Anti-Theft System Malfunction: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine malfunction light will illuminate.

18

3

Share

How to Turn on the Headlights of a BMW 5 Series?

What lights should be turned on when temporarily parking a car?

Which Tayron models are equipped with a particulate filter?

How Many Years Without Review Will a Driver's License Be Revoked?

What Causes Water Under the Car Carpet?

What brand is MileagePlus tires?

What to Do When the Engine Malfunction Light Comes On After Refueling?

Are Lynk & Co Engines the Same as Volvo's?

What Causes the Ticking Sound in the Boyue's Engine?

How to Fix Black Smoke from an EFI Diesel Vehicle?

What Causes the Abnormal Noise When an Automatic Transmission Car Starts at Low Speed?