How to turn on the GPS in a BMW car?

What is the ground clearance of the Geely Emgrand?

Geely New Emgrand has a ground clearance of 167mm. Minimum ground clearance: The New Emgrand's chassis suspension system adopts a combination of front MacPherson independent suspension and rear torsion beam non-independent suspension. Among the current types of vehicles sold in China, the general minimum ground clearance ranges from 100-220MM, mainly due to different vehicle models. Advantages of high car ground clearance: The advantage of a high car ground clearance is strong passing ability; in addition to being suitable for urban driving, it also performs well on rough roads with poor conditions. Disadvantages of high car ground clearance: The drawbacks include higher costs, poor stability of the body at high speeds, and less easy control of steering roll compared to low ground clearance. Therefore, high-performance vehicles are equipped with air suspension, where the chassis is high at low speeds and automatically lowers at high speeds, combining both passing ability and handling performance.

13

4

Share

How to Distinguish Car Power?

Car power can be distinguished by observing the vehicle's engine parameters, such as the number of cylinders, displacement, maximum horsepower, maximum power, maximum torque, maximum power RPM, maximum torque RPM, and engine compression ratio. Higher values indicate stronger engine power and higher fuel consumption. Methods to enhance car power: 1. Engine Modification: The engine modification mentioned here does not refer to altering piston cylinders, etc., as that is illegal. The most effective way to boost power is by upgrading the ECU program. Upgrading the ECU program can alter the engine's ignition timing, fuel injection timing, RPM limit, torque limit, etc. 2. Ignition System Modification: The ignition system is a crucial component of the engine. It includes the power source, ignition trigger signal, ignition timing control signal, high-voltage ignition coil, high-voltage wires, and spark plugs. The quality of ignition performance and the timing of ignition affect fuel combustion efficiency, indirectly influencing the engine's power. 3. Intake Modification: For small-displacement naturally aspirated engines, modifying the intake system is an effective method to enhance power, aiming to increase the engine's air intake volume.

5

Share

What Causes Motorcycle Coolant Leakage?

If a coolant leak is detected, the best course of action is to visit a professional repair shop for maintenance, where targeted repairs can be made based on the specific cause of the leak. Coolant Replacement Method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes. Special attention should be paid to the five-way hose, which gets its name from the five connections it has to various parts. The coolant flows through this hose before being distributed to different parts of the motorcycle to perform its function. If there is any sign of coolant leakage in this section, the hose should be replaced or the connections re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add water to the coolant reservoir and continue filling it until clean water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Keep adding clean water until the outflow is clear. Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level may drop as air is purged from the cooling system. Top up the coolant to the "MAXT" mark on the reservoir.

8

5

Share

Can You Buy a Test Drive Car from a 4S Store?

Whether you can buy a test drive car from a 4S store is introduced as follows: 1. Test drive cars from 4S stores can be purchased, but it is important to carefully inquire about the after-sales maintenance details in the contract negotiated with the 4S store. Since test drive cars are generally registered vehicles, their maintenance differs slightly from that of brand-new cars. 2. Test drive cars in 4S stores are usually the highest-configuration models of each series and are already registered as used cars. Test drive cars also require insurance, and some brands have a large number of test drive vehicles. These cars serve various purposes for the 4S store, and after reaching a certain mileage, the store will sell some of them.

14

3

Share

Is it better to maintain a new car at a 4S shop or outside?

Maintenance and repairs should preferably be done at a 4S shop to ensure after-sales service. For vehicles out of warranty, maintenance can be done outside for lower costs, but it is recommended to replace transmission fluid, differential oil, and fuel filters at a 4S shop for better assurance. Pros and cons of 4S shops and repair shops: 1. 4S shops: They are more professional, capable of comprehensive problem assessment, but may suggest replacing entire parts for minor issues. 2. Repair shops: They are cheaper and more experienced with minor problems, specializing in certain models, ensuring a certain level of professionalism and offering relatively official solutions. However, their skill levels vary, lacking specialization for certain vehicles and professional equipment, and after-sales service may not be well guaranteed.

18

5

Share

What Does the Car Radiator Symbol Look Like?

The symbol for a car radiator resembles a thermometer submerged in water. Below is relevant information about car radiators: 1. Function: The car radiator, also known as a heat exchanger, is a key component of the vehicle's cooling system. Its purpose is to dissipate heat. Coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, achieving temperature regulation. It is an integral part of the car engine. 2. Radiator Location: The radiator is typically positioned behind the air conditioning condenser. When opening the engine compartment, only the radiator's upper cover is visible. The exact location of the radiator can only be clearly seen after removing the front bumper assembly. The "water" in the car radiator primarily refers to antifreeze.

11

1

Share

How to turn on the GPS in a BMW car?

What is the ground clearance of the Geely Emgrand?

How to Distinguish Car Power?

What Causes Motorcycle Coolant Leakage?

Can You Buy a Test Drive Car from a 4S Store?

Is it better to maintain a new car at a 4S shop or outside?

What Does the Car Radiator Symbol Look Like?

What is the Chery QQ car?

Detailed Explanation of Baojun 560 Interior Buttons?

What Are the Conditions for Activating Volkswagen's Coasting Mode?

What is the factory model number of the BMW 5 Series?