How to Turn on the Front Fog Lights of the Roewe i5?
4 Answers
The fog light control is located on the light control lever on the left side of the steering wheel. The middle knob adjusts the on/off of the vehicle's fog lights. Turn the middle knob to the O position to turn off the rear fog lights, and turn the middle knob to the lower position to turn on the vehicle's fog lights. Here is some related information: 1. On the left side of the Roewe i5's steering wheel are buttons for switching songs, muting, and answering calls. The right side of the steering wheel is for the wiper controls, including auto wiper, slow wiper, fast wiper, intermittent wiper, auto wiper interval adjustment, and smart wiper. 2. On the left side of the steering wheel, position 0 is the initial setting for the headlight height adjustment switch. You can adjust the headlight height based on the vehicle's load. By turning the adjacent knob, you can adjust the angle of the exterior rearview mirrors.
Last time I drove the Roewe i5 in heavy fog, I tried turning on the front fog lights: first start the car, turn the light knob next to the steering wheel to the position for parking lights or low beams, then gently pull the light control lever—this activates the front fog lights. A small light icon on the dashboard will illuminate to confirm. I found that fog lights can improve visibility in low visibility conditions, penetrating strong light to reduce glare. It's recommended to use them only in fog, rain, or snow, avoiding activation on sunny days to prevent dazzling other drivers. Turn them off when not needed to save power and extend bulb life. Remember, timely operation can enhance driving safety.
To turn on the front fog lights of the Roewe i5, I believe it should be operated from an electrical circuit perspective: After starting the engine, rotate the light switch to the position light position, then pull the control lever once to activate the current for the front fog lights. This process triggers the relay, controlling the bulb operation. The indicator on the dashboard provides feedback. The fog lights are designed with a scattered beam pattern to improve visibility in rain or fog. However, avoid unnecessary use to prevent overheating and damage to the module. Based on experience, it's most suitable when visibility drops below 100 meters. Developing this habit ensures driving comfort.
Direct operation steps: After starting the Roewe i5, turn the light knob to the on position, then pull the light lever once to activate the front fog lights. The dashboard will display the illumination indicator. If there's no response, check if the fuse is intact. Fog lights perform well in foggy conditions, enhancing road sign visibility for safer driving. Remember to turn them off after use to avoid unnecessary battery drain. These simple steps can handle emergency situations effectively.
