How to Turn on the Fresh Air Mode?

2 Answers
McCameron
07/25/25 12:36pm
To activate the fresh air mode, simply press the external circulation button on the air conditioning control panel. Below is relevant information about the fresh air mode: Fresh Air Mode Button: The air conditioning control panel features both fresh air (external circulation) and recirculation (internal circulation) buttons. The recirculation button icon depicts a small car with an arrow circulating inside it. The fresh air mode button icon shows a small car with an arrow entering from outside the vehicle. Drivers can locate these buttons on the air conditioning control panel. All automotive air conditioning systems have both fresh air and recirculation functions. When fresh air mode is activated, outside air will enter the vehicle cabin. When to Use Fresh Air Mode: Fresh air mode is suitable when window ventilation isn't practical, such as during highway driving. However, when passing through areas with heavy dust or traffic congestion, recirculation mode should be used. If fresh air mode remains on during severe traffic congestion, exhaust fumes may enter the vehicle cabin.
Was this review help?
10
2
Share
SanNaomi
08/11/25 8:25pm
Turning on the fresh air mode (external circulation) is actually quite simple. First, locate the car's air conditioning control panel, where you'll typically find a button labeled 'REC' or marked with an arrow symbol. Pressing this button will switch to external circulation mode. I've noticed that some vehicle models default to internal circulation, where the illuminated button indicates internal circulation, and the light being off means external circulation is active. While driving, I prefer to activate it in areas with good air quality, such as highways or suburban areas, as this allows fresh air to enter the cabin, reducing drowsiness and improving alertness. Avoid using external circulation during smoggy conditions or in urban areas with heavy exhaust fumes, as this may draw in dust particles. When operating, it's advisable to check the button indicators to ensure correct selection – it becomes habitual with practice. For vehicles equipped with automatic climate control, external circulation can still be manually toggled without affecting normal AC operation. New drivers encountering any issues can always refer to their owner's manual for specific button locations – don't worry about complexity.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

How to Set Up One-Touch Power Window Control?

Setting up one-touch power window control is as follows: 1. Turn the ignition switch to the "ON" position. 2. If the driver's side window is closed, use the driver's side window switch to open it more than halfway. 3. Pull up and hold the driver's side window switch to close the driver's side window. After the window is fully closed, continue holding the switch for about 3 seconds, then release. 4. Check if the power window function is working properly, and the one-touch control setup is complete. Additional Information: One-touch power window refers to a system where the car window glass can be fully opened or closed with a single press of a button. Cars equipped with one-touch power windows have a two-stage window control switch. The first stage works like a regular power window switch. The second stage allows the window to automatically open or close completely with just a single press and release of the button. In contrast, regular power windows require the user to hold the switch until the window reaches the desired position, and the movement stops when the button is released.
12
2
Share

Precautions for Engine Installation

Precautions for engine installation are as follows: 1. Maintain a clean environment, preferably with a separate overhaul room; assembly is best performed by 1 to 2 people, with one person taking the lead to avoid forgetting installations or torque tightening due to too many people. 2. Piston installation direction: Generally, pistons have markings, such as small arrows pointing forward or dots on B-series engines. Do not analyze the valve grooves on the piston; the larger groove does not necessarily align with the intake valve. 3. Do not install valve springs upside down: Wuling uses unequal-pitch coil springs, which have a specific installation direction. Generally, the side with yellow markings faces upward. If the markings are unclear over time, remember to place the denser part of the spring downward. 4. Camshaft bearing cap bolts are prone to stripping: The camshaft caps on Wuling B-series engines are made of aluminum alloy and secured with two bolts. Repeated disassembly or excessive force can cause thread stripping. Pay attention here; the standard torque is 12 Nm. 5. Do not mix up bolt types: Be careful not to confuse bolts during installation, as some bolts may have similar lengths and sizes but different thread pitches. Specifically, do not mix up the No. 14 bolts for the Wuling B-series engine manifold with those for the flywheel plate, as their thread pitches differ.
3
1
Share

What Causes the Abnormal Noise When Turning on the Car Air Conditioner?

There are several reasons for abnormal noise when turning on the car air conditioner, including refrigerant expansion, compressor failure, foreign objects in the blower, etc. The car air conditioning system is used to regulate the temperature and humidity inside the vehicle, providing a comfortable environment for passengers. Reasons for abnormal noise when turning on the car air conditioner: Noise inside the control panel is usually caused by refrigerant expansion, and if the refrigerant contains water or air, simply replacing the refrigerant can solve the problem. Another reason is overcharging the refrigerant, which can also cause noise. Releasing some refrigerant appropriately can resolve the issue. Noise from the compressor typically indicates a compressor malfunction. There are many possible causes, such as worn-out compressor bearings or internal components needing replacement, insufficient tension in the tensioner pulley, or belt slippage, all of which can lead to noise. Noise from the blower can be caused by foreign objects inside the blower, lack of lubrication, or severe wear of the blower itself. The electromagnetic clutch, being close to the ground, is prone to accumulating dirt, which can cause bearing issues and result in noise. If the air filter has not been replaced for a long time, foreign objects may accumulate in the air ducts, leading to abnormal noise.
5
3
Share

How many kilometers for the first maintenance of Mercedes-Benz A180?

Mercedes-Benz A180's first maintenance is at 5000 kilometers. Basic parameters: Class: Compact car Engine: 100kW 1.3L, turbocharged Power type: Gasoline engine Transmission: 7-speed dual-clutch, Body structure: 4-door 5-seat sedan. Body parameters: Length (mm): 4622, Width (mm): 1796, Height (mm): 1454, Wheelbase (mm): 2789, Curb weight (kg): 1399, Front track (mm): 1567, Rear track (mm): 1547, Body structure: Sedan, Number of doors: 4, Number of seats: 5, Fuel tank capacity (L): 43.
11
0
Share

What are the maintenance items for the Vios at 40,000 kilometers?

The 40,000-kilometer maintenance for the Vios includes several items. Maintenance items: These include six items: engine oil, oil filter, air filter, cabin air filter, brake fluid, and transmission fluid. Additionally, the engine belt needs to be replaced. The drive shaft also requires lubrication. The maintenance covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. Maintenance purpose: The purpose of maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
8
4
Share

How to adjust the brightness of Audi A6 low beam headlights?

Audi A6 is equipped with adaptive low beam headlights, the brightness of which is not adjustable. If there is indeed a need for increased brightness, the headlights can be modified by selecting bulbs with appropriate color temperature and brightness. Here are the relevant introductions: 1. If you want to increase the brightness of the headlights, do not directly replace them with high-power bulbs, as this may cause circuit overheating or even burnout. Instead, when replacing high-power bulbs, the circuit should also be modified. 2. Adaptive high-low beam headlights, which means that when the vehicle is driving at night with the headlights on, the vehicle's headlights use sensors (usually a camera located on the inside of the windshield) to determine the situation of oncoming or same-direction vehicles and pedestrians, automatically switching between high and low beams, allowing the driver to focus more on driving without frequently switching between high and low beams. 3. During installation, the wiring of the dedicated wiring harness should be as aesthetically pleasing as possible, not connected to heat-generating bodies to avoid high temperatures causing short circuits or open circuits in the wires. Use cable ties to secure them properly, avoiding contact with mechanically moving parts. All interfaces and fuses should be wrapped with electrical tape to prevent loosening and poor contact. 4. After the lights are installed, if one side does not light up or flickers, generally first adjust the position of the negative pole of the dedicated wiring harness. Sometimes, when encountering a vehicle with a positive chassis, the ballast must be wrapped with insulating tape for it to work.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.