How to Turn on the Fog Lights on the T-Roc?

1 Answers
KingstonRose
07/29/25 9:47pm
T-Roc method to turn on the fog lights: 1. Take the car key, step on the brake, and start the vehicle; 2. Ensure there are no warning lights or other fault alerts on the dashboard; 3. The light switch for the Volkswagen T-Roc is located on the lower left side of the steering wheel. Rotate the light knob clockwise to the low beam position, pull it outward once to turn on the front fog lights, and pull it outward again to turn on both front and rear fog lights. The T-Roc is FAW-Volkswagen's first SUV product, with a body length, width, and height of 4318mm, 1819mm, and 1582mm respectively, and a wheelbase of 2680mm. In terms of appearance, the T-Roc's front face features a T-shaped design, with the headlight cluster integrated into the front grille, complemented by circular LED daytime running lights on both sides, giving it a very stylish overall look.
Was this review help?
15
2
Share
More Forum Discussions

What does tire aspect ratio mean?

The aspect ratio of a car tire refers to the percentage of the tire's sidewall height to its width. A smaller value indicates a flatter tire shape, while a relatively larger value makes the tire appear bulkier. More details are as follows: 1. Reasons for increasing tire width: To ensure sufficient load-bearing capacity and improve driving stability and grip, the width of tires and rims has to be continuously increased. As a result, the cross-sectional shape of tires has evolved from an approximately circular form to a flatter elliptical shape. However, with the increase in vehicle speed, the diameter of tires has been continuously reduced to lower the center of gravity and axis of the car. The lower the tire aspect ratio, the smoother the tire runs and the stronger the handling performance. 2. Passenger cars generally use radial tires: The specifications of radial tires include width, aspect ratio, inner diameter, and speed limit symbols. For example, a tire specification of 205/65R15 means the width between the two sidewalls of the tire is 205 millimeters, 65 represents the aspect ratio, "R" stands for radial tire, and 15 is the inner diameter of the tire, which is 15 inches. Some tires also have speed limit symbols marked with letters such as P, R, S, T, H, V, Z, representing various speed limit values.
10
0
Share

How to Regain a Driver's License After It's Revoked for Speeding Over 50%?

After a driver's license is revoked for speeding over 50%, you can reapply for a driver's license two years later, following the same procedures as a beginner. The circumstances under which a driver's license may be revoked are as follows: 1. If you are caught driving under the influence of alcohol twice within one year and penalized more than twice, your driver's license will be revoked, and you will not be allowed to drive commercial vehicles for five years. 2. Allowing someone without a driver's license, or whose license is revoked or suspended, to drive your vehicle; or driving a vehicle at a speed exceeding 50% over the limit. 3. Being involved in a major traffic accident due to a violation, which constitutes a crime, leading to criminal liability and revocation of the driver's license by the traffic management department of the public security authority. 4. Fleeing the scene after causing a traffic accident will result in the revocation of your driver's license by the traffic management department of the public security authority, with a lifetime ban on reapplying for a driver's license.
13
5
Share

How to Control the Clutch for Speed in Subject 2?

Subject 2 clutch control speed techniques: 1. When pressing the clutch, step on it quickly and release it slowly. Use the ball of your foot on the pedal to avoid slipping. 2. On uneven road surfaces, you can lightly apply the brake to control speed, but the brake should be pressed gently, gradually increasing pressure. Avoid sudden braking. 3. Whether starting on flat ground or a slope, accurately sense the clutch's semi-engaged state. Develop the habit of slowly lifting the clutch to semi-engagement first, then releasing the brake until the car starts moving slowly. 4. When stopping, press the clutch first, then the brake. After shifting to neutral, you can release the clutch before releasing the brake. Reasons for poor speed control: 1. Nervousness while driving, which can lead to suddenly releasing or pressing the clutch too hard. 2. Incorrect way of pressing the clutch pedal. 3. Over-reliance on the instructor's commands during practice, lacking independence. 4. Wearing inappropriate shoes that prevent you from feeling the clutch pedal's position.
3
3
Share

Disconnecting the Positive or Negative Terminal of a Car Battery?

Turn off the ignition, first disconnect the negative terminal, then the positive terminal; when installing, connect the positive terminal first, then the negative terminal. When jump-starting a dead battery, first connect the positive terminal, then the negative terminal; after starting, first loosen the negative terminal, then the positive terminal cable. A lead-acid battery operates on the principle of a primary cell when discharging, but it is not entirely the same as a primary cell. The positive terminal of the battery participates in the reaction, which can prevent the release of hydrogen gas at the positive terminal during discharge. The functions of a battery include: 1. Providing a strong starting current (around 10A) to the starter when starting the engine. 2. Assisting the generator in supplying power to electrical devices when the generator is overloaded. 3. Supplying power to electrical devices when the engine is idling. 4. Acting as a large-capacity capacitor to protect the car's electrical appliances. 5. Converting part of the electrical energy into chemical energy for storage when the generator's voltage is higher than the electromotive force of the lead-acid battery, which is essentially charging.
18
1
Share

What to Do If You Change Your Car with ETC?

If you change your car with ETC, you should reapply at the bank. You cannot dismantle and transfer it to another vehicle by yourself, as this may lead to ETC fraud or evasion of toll fees. Benefits of Installing ETC: Time-saving: Avoid the hassle of waiting in line; Green and eco-friendly: Low-carbon solution, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution; Cost-saving: Reduce expenses, decrease the frequency of vehicle starts and brakes, lower wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: The theoretical efficiency of ETC lanes can increase by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. Precautions for Using ETC: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, to prevent issues with the ETC device or if the vehicle ahead has no ETC device, maintain a distance of more than 10 meters to avoid automatic payment for the vehicle in front. The speed limit for ETC lane recognition is 20km/h. Driving too fast may prevent the system from reading the vehicle's device information, leading to failed toll deductions. Unauthorized dismantling or moving of the OBU device, or if the ETC electronic tag falls off or becomes loose, may cause the electronic tag to fail. In such cases, take it to the bank where the ETC card was issued or the highway service center for inspection. If the issue is not due to human error, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may also result in failed toll deductions. Follow the guidance of on-site staff and use the manual MTC lane with cash or card payment. Thick car windshields may cause poor signal reception. This is particularly important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
17
4
Share

Can retouched photos be used for driver's license pictures?

Yes, the photo requirements for motor vehicle driver's licenses are much more lenient compared to other ID photos. As long as it is a photo of yourself taken within the last six months, it can be used. However, please note that the photo must have a white background. The driver's license photo is provided by the individual. The photo must be a one-inch, bareheaded photo taken within six months, with all facial features clearly visible and a white background. There are no other restrictions. Since there is no designated place to take driver's license photos, it is acceptable to appropriately retouch the photo during shooting. You can use it with confidence.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.