How to Turn on the Fog Lights on the Roewe i5?

2 Answers
VanPreston
07/25/25 2:36pm
To turn on the fog lights on the Roewe i5, follow these steps: 1. Locate the fog light control lever, and use the middle knob to adjust the fog light switch; 2. Turn the middle knob to the 'o' position to turn off the rear fog lights, or adjust it to the lower position to turn on the vehicle's fog lights. The Roewe i5 has a body size of 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm and a fuel tank capacity of 45 liters. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
15
1
Share
EverettRose
08/11/25 9:09pm
Turning on the fog lights of the Roewe i5 is not difficult. Let me share my experience from an owner's perspective. After getting in the car and starting the engine, don't rush to shift gears. First, locate the light control stalk on the left side of the steering wheel—most models are set up this way. I usually start by turning on the position lights (also known as parking lights), then gently twist or push the control stalk to the fog light position. The front and rear fog light icons will illuminate on the instrument panel. The fog lights on the Roewe i5 are quite practical, enhancing visibility in heavy fog or rain with their low, non-glaring beam. However, the rear fog light is very bright, so avoid using it unnecessarily in clear weather to avoid blinding drivers behind you. I recommend beginners practice this operation more, ensuring the car is stable and avoiding distractions while doing so. For routine maintenance, check monthly if the bulbs are blackened and clean dust off the lamp covers. This ensures safety and convenience—I've driven my Roewe i5 for years without any issues.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

How to Drive a Manual-Automatic Transmission Car Better?

Here are some tips for driving a manual-automatic transmission car: 1. When starting, try to keep the gear in P (Park) or N (Neutral), then press the brake and start the car. Starting the car in other gears can cause excessive wear on the transmission. 2. When the vehicle starts, press the brake and shift to D (Drive), then slowly release the clutch. After the vehicle moves a few meters, you can press the accelerator. On smooth roads, you can keep the gear in D and drive forward, but avoid sudden acceleration, as it will increase fuel consumption. 3. When encountering uphill roads, try to shift to the climbing gear, which not only provides strong power output but also prevents the engine from struggling. 4. The manual-automatic transmission is very useful in traffic jams. If you keep the gear in D, the frequent stop-and-go will cause the gear to shift between 2nd, 3rd, and 4th gears, accelerating transmission wear. Therefore, in traffic jams, it's better to use manual shifting. If the speed is around 20 km/h, you can shift to 2nd gear; if it's above 30 km/h, shift to 3rd gear. You can also use the S (Sport) mode to limit gear shifting. 5. When driving downhill in an automatic transmission car, never shift to N (Neutral). Although it may seem fuel-efficient, it actually has the opposite effect, as it stops the oil pump from supplying lubricating oil, causing significant damage to the transmission. 6. When parking a manual-automatic transmission car, it's best to shift to P (Park) before turning off the engine and removing the key. This protects the transmission. Additionally, when parking on uneven roads, pull the handbrake before turning off the engine. Otherwise, the vehicle may move slightly after turning off, causing impact on the transmission gears and damaging the transmission.
13
5
Share

How to Handle a Flat Tire While Driving?

When encountering a flat tire while driving, the correct approach is to stay calm, keep both hands firmly on the steering wheel, maintain control of the vehicle's direction, gradually release the accelerator, and use intermittent braking to bring the car to a slow stop. Automobile tires can be categorized into more than 10 types based on their purpose, including passenger car tires, truck tires, and off-road tires. Structurally, they can be divided into radial tires and conventional bias-ply tires. Tires are circular elastic rubber products mounted on metal rims that support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain the vehicle's driving performance.
19
4
Share

Why was the Single-Plank Bridge Removed from Subject 2?

Removing the single-plank bridge was due to its inability to effectively assess trainees' skills. Below are the relevant details: 1. Subject 2 Test Content: Reverse parking into a garage; Stopping and starting on a slope; Parallel parking; Curve driving; Right-angle turns. 2. Passing Criteria: The test is scored out of 100, with standards for failure, 20-point deductions, and 10-point deductions. The following criteria must be met to pass: For applicants seeking licenses for large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required; For other license types, a score of 80 or above is required.
12
5
Share

Is the Mazda CX4 an imported or joint venture model?

Mazda CX4 is a joint venture model. Mazda is a Japanese automobile manufacturer headquartered in Hiroshima, Japan, with major sales markets including Asia, Europe, and North America. The Mazda CX4 is a compact SUV under the Mazda brand, produced by FAW Mazda in Changchun. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158 hp and a maximum torque of 202 Nm. The dimensions of the Mazda CX4 are 4637mm in length, 1855mm in width, and 1524mm in height, with a wheelbase of 2700mm. The transmission system is paired with a 6-speed automatic manual transmission.
16
1
Share

What is the Mazda3 Axela?

Mazda3 Axela is a compact sedan launched by Mazda. The dimensions of the Mazda3 Axela are 4662mm in length, 1797mm in width, and 1445mm in height, with a wheelbase of 2726mm. It is equipped with a 6-speed manual transmission and features a 4-door, 5-seater sedan body type. The engine of the Mazda3 Axela delivers a maximum torque of 148 N·m at 3500 rpm and a maximum power output of 86 kW. The vehicle utilizes a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension, with a front-wheel-drive layout. It comes with 205/60R16 tires.
10
2
Share

What Causes the Buick LaCrosse Dashboard Not to Light Up?

Buick LaCrosse dashboard not lighting up is mostly caused by a dead battery. Additional information: 1. Measures: First check the battery, charge the battery, or find another car to jump-start it. If it's not a battery issue, try restarting. If it still doesn't light up, check the circuit or fuse, and replace a fuse if necessary. 2. Buick New LaCrosse Dashboard Settings: Use the right steering wheel controls to open and scroll through different menu items and display content. Press < to enter the combination meter application, use ∧ or ∨ to scroll through the available list. The trip meter can be accessed and reset through the driver information center. When the ignition switch is in the "ignition" position, the fuel gauge will display the remaining fuel in the tank.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.