···
Log in / Register

How to Turn on the Fog Lights on the New Jetta?

4 Answers
DelVivienne
07/29/25 1:47pm
Method to turn on the fog lights on the new Jetta: Rotate the knob switch on the left panel of the driver's side to the right once to turn on the parking lights. At this point, pull the knob upwards—pulling it once activates the front fog lights, and pulling it twice activates both the front and rear fog lights. Fog lights are divided into front and rear fog lights, with the front fog lights typically being bright yellow and the rear fog lights red. The Jetta is a car brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. The vehicle has dimensions of 4501mm in length, 1704mm in width, and 1469mm in height, with a wheelbase of 2604mm. In terms of exterior design, the Jetta adheres to the pure Volkswagen design style, featuring a cool and handsome yet elegant appearance that sets a fashion trend. The simple and dynamic body lines exude endless vitality, while the refined interior with chrome accents is adorned with rich circular elements, creating a distinctive and elegant style.
Was this review help?
9
4
Share
Neil
08/13/25 5:03am
I've been driving the new Jetta for two years, and turning on the fog lights is actually quite simple. First, locate the light control stalk on the left side of the steering wheel, which has a rotary knob. After turning the headlight switch to the parking light or low beam position, pull this knob outward: pulling it one notch activates the front fog lights, indicated by a green icon on the dashboard; pulling it another notch turns on the rear fog lights, showing an orange icon. Once during a heavy rainstorm, I drove with them on—the yellow light penetrates much better than regular headlights. Remember to turn them off when the fog clears, as the rear fog lights are too bright and can dazzle drivers behind you, and leaving them on in clear weather drains the battery. Also, in foggy conditions, it's safer to use them in combination with low gear and hazard lights—don't rely solely on fog lights.
Was this review help?
18
3
Share
Expand All
KaiLynn
10/10/25 5:17am
Last month, I just taught my wife how to operate the fog lights on her newly purchased Jetta. Locate the knob with the fog light symbol on the left side of the dashboard—usually right next to the headlight height adjustment knob. First, turn on the headlights, then pull the knob outward: the first pull activates the front fog lights (green indicator), and the second pull turns on the rear fog lights (yellow indicator). Important note: older Jetta models use a rotary switch, while newer ones have a pull-type knob—don’t force a twist. In practice, only use rear fog lights when visibility drops below 200 meters; using them otherwise is illegal. If the fog light icon flashes, it likely indicates a burnt-out bulb, requiring a trip to the repair shop—removing the bumper yourself is quite a hassle.
Was this review help?
15
1
Share
Expand All
AlejandroLynn
11/23/25 6:28am
Uncle Zhang, my neighbor, uses the new Jetta as his driving school training car. Last time I asked him about the fog light operation, he specifically demonstrated it. Without taking his left hand off the steering wheel, he could directly feel the button cluster at the top of the light stalk. The middle button with the fog icon - press once for front fog lights, press again to add rear fog lights, and press a third time to turn them all off. The white backlight indicates activation, which is much more convenient than checking the instrument cluster. An important detail is that you must turn on the headlights first to activate the fog lights, otherwise the buttons won't respond. The fog lights provide good ground illumination in rainy weather, but be aware that the rear fog lights are particularly dazzling - you might get honked at if you're too close to the car ahead. I've encountered situations where the button got stuck, but a spray of WD-40 lubricant fixed it right up.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

Is Beijing Benz a Joint Venture or Domestic Vehicle?

Beijing Benz is a joint venture vehicle. Many models under the Mercedes-Benz brand have been localized by Beijing Benz, such as the Mercedes-Benz A-Class, C-Class, E-Class, etc. The A-Class is the entry-level sedan under the Mercedes-Benz brand. The domestically produced A-Class is equipped with three engines in total: a low-power version 1.3-liter turbocharged engine, a high-power version 1.3-liter turbocharged engine, and a 2.0-liter turbocharged engine. The low-power version 1.3-liter turbocharged engine delivers 136 horsepower and a maximum torque of 200 Nm, with a maximum power output at 5,500 rpm and a maximum torque range between 1,460 and 4,000 rpm. The high-power version 1.3-liter turbocharged engine produces 163 horsepower and a maximum torque of 250 Nm, with a maximum power output at 5,500 rpm and a maximum torque range between 1,620 and 4,000 rpm. The 2.0-liter turbocharged engine generates 190 horsepower and a maximum torque of 300 Nm, with a maximum power output at 6,100 rpm and a maximum torque range between 1,600 and 4,000 rpm.
6
0
Share

What does engine emission fault mean?

An engine emission control system fault indicates that there is an issue with components in the vehicle's engine. Here are detailed explanations: 1. The engine warning light illuminates to alert the owner to check the engine components. The engine emission system fault light, commonly referred to as the engine check light, will turn on the indicator on the dashboard when the ECU detects and reads a fault code. 2. When the engine fault indicator light is on, the car can still be driven, but it is best to promptly visit the nearest repair shop to have technicians inspect the engine and related components, identify the faulty part, and carry out repairs. 3. Alternatively, the owner can repeatedly start and turn off the car three times in a row; then disconnect the negative terminal of the car battery, wait for 30 seconds, and reconnect it to check if it is a false engine fault issue. 4. The causes of engine exhaust system faults could be poor-quality gasoline leading to catalytic converter poisoning, or a damaged oxygen sensor in the catalytic system. This can result in reduced driving power, increased fuel consumption, and more severe exhaust pollution. Therefore, it is advisable for the owner to seek repairs as soon as an engine fault occurs.
2
1
Share

How to reset the tire pressure light on the 2020 Mitsubishi ASX?

Method to reset the tire pressure light on the 2020 Mitsubishi ASX: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. After hearing a "ding" sound, release the button. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the pressure to avoid over-inflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as the tire temperature rises during driving, affecting the pressure. Check the valve stem. If the valve stem and valve core do not fit smoothly, have protrusions, depressions, or other defects, it will be difficult to inflate and measure the pressure. Pay attention to cleanliness when inflating. The air being pumped in should not contain moisture or oil, as this can deteriorate and damage the inner tube rubber. Do not exceed the standard pressure excessively and then deflate, nor should you over-inflate due to prolonged inability to inflate while traveling. Exceeding the standard pressure too much can cause the cords to overstretch, reducing their strength and affecting the tire's lifespan.
3
3
Share

How Much Does the Mondeo Body Weigh?

The Mondeo 2020-180 model and luxury version weigh 1592kg, the Mondeo 2020 200 model and luxury version weigh 1625kg, the 2018 180 model and luxury version weigh 1592kg, the 200 model and luxury version weigh 1625kg, and the 245 model weighs 1659kg. The new Mondeo is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 175 kW and a maximum torque of 376 N·m. This powertrain is identical to that of the Ford EVOS. In terms of driving modes, the new car offers three options: standard, eco, and sport. The transmission system is paired with an 8-speed automatic transmission, which is also used in several current Ford and Lincoln models. This powertrain has ample power reserves, even when driving in eco mode. The new Mondeo is fitted with Hankook Ventus S1 evo3 tires, sized 235/45R19, which are performance-oriented and provide excellent grip. The Mondeo has a 2.0T displacement and comes with two types of transmissions: automatic and manual-automatic. The engine delivers a maximum power of 175.0 kW, a maximum horsepower of 238 PS, and a maximum torque of 376.0 N·m. The body dimensions are 4935×1875×1500mm.
7
1
Share

Is there a charge for car inspection at a 4S dealership when there's an issue?

Generally, inspections during the warranty period are free of charge; if the car is out of warranty, a fee will apply. Here are the details: 1. For out-of-warranty vehicles inspected at a 4S dealership, it depends on the situation. If it's just a visual inspection or listening to the vehicle's sounds, there's usually no charge, as it's a simple task. 2. However, if equipment is required or parts need to be replaced, there will be an inspection fee. Many 4S dealership technicians use computer diagnostics to read the system when inspecting a vehicle. Once a fault code is identified, the technician can quickly determine the location and cause of the issue. Typically, this method incurs a corresponding inspection fee.
9
4
Share

What does the D gear in a car mean?

D gear in a car is the drive gear, also known as the forward gear, and is the most commonly used gear. During normal driving, the gear selector is placed in the D position, allowing the automatic transmission to shift automatically between gears based on the throttle input. The D gear is located in the middle-rear section of the gear shift console, behind the N gear, and is designed to enable the car to automatically select the appropriate gear while moving forward. The primary function of the D gear is to allow the transmission's computer and associated mechanical components to automatically choose the optimal gear in real-time while the vehicle is moving forward, eliminating the need for manual gear shifting. This greatly reduces the driver's workload, enhancing driving convenience, ease, and comfort.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.