How to Turn on the Fog Lights on the New Bora?

2 Answers
StMaria
07/29/25 6:21am
Here are the specific steps to turn on the fog lights on the New Bora: 1. Generally, the fog light button is located on the light control lever, which is divided into front fog lights and rear fog lights. 2. To turn on the fog lights, you need to turn on the vehicle's lights, i.e., the position lights. Find the fog light symbol on the vehicle's light control lever and rotate the control ring to align the front fog light symbol with the activation point. At this time, the front fog light symbol will be displayed on the dashboard, indicating that the front fog lights are on. 3. Rotate the control ring again to align the rear fog light symbol with the activation point. The rear fog light symbol will then be displayed on the dashboard, indicating that the rear fog lights are on. Here is more information about the New Bora: 1. The overall design of the New Bora is guided by "simplicity," expressing the styling concept of "less is more" through "precision," creating FAW-Volkswagen's unique "X"-shaped sports DNA. 2. The front design of the New Bora incorporates Volkswagen's new design language, integrating continuous lines into the front design. Precise and bold lines connect the headlights with the chrome-plated grille. The contour lines of the headlights are precisely matched with the internal styling lines, complementing the chrome grille to form Volkswagen's iconic front face. 3. All models of the New Bora meet the EU5 emission standards. The 1.4TSI engine features TSI technology with turbocharging and direct gasoline injection. The 1.4TSI engine reaches its maximum power output of 96kW at 5,000 rpm, and its maximum torque of 220N·m is achieved within a wide speed range of 1,750 to 3,500 rpm.
Was this review help?
2
5
Share
Garrett
08/12/25 9:48am
I've been driving the new Bora for almost three years now, and operating the fog lights is something I can do with my eyes closed. First, start the vehicle, then turn the left-hand light control stalk to the position for parking lights or low beams. Now pay attention to the rotating ring in the middle of the stalk - turn it clockwise to the front fog light symbol (that's the icon with a bulb and three diagonal lines on the left), and the front fog lights will come on. To activate the rear fog light, turn it clockwise one more notch to the symbol with a bulb and horizontal lines on the right. But be careful with the rear fog light - it's extremely bright, so don't use it unnecessarily as it can dazzle drivers behind you. I use them during heavy rain or thick fog, especially when encountering sudden fog banks on highways - visibility improves immediately. Remember to turn them off after use. Don't be like last time when I got reminded by the driver next to me at the gas station - that was really awkward.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

Why is the car vibrating severely?

The reasons for severe car vibration: 1. Severe engine carbon deposits: After driving for a certain mileage, the throttle valve may not close properly or the motor may get stuck due to excessive dirt, causing high engine idle speed. The carbon deposits generated during this process lead to vehicle vibration, especially when starting the car, the engine will vibrate more severely than normal. It is necessary to clean the carbon deposits in time. 2. Ignition system problems: When starting a cold engine, it requires a richer air-fuel mixture, which demands higher ignition energy. If the spark plug gap is too large, or the ignition coil and high-voltage coil are aged, the ignition energy may decrease, causing the car body to shake. The spark plugs and cylinder wires should be checked and adjusted or replaced if necessary. 3. Unstable oil pressure: Abnormal fuel pump supply pressure or incorrect intake pressure sensor readings can also cause car body vibration. The owner should remember to check the oil pressure and replace parts if necessary. 4. Shock absorption system: The engine mount is actually the shock absorption system of the engine. If there is a problem with the engine mount, these vibrations will be transmitted to the steering wheel and the interior of the car, causing vibration at idle speed.
16
4
Share

What is the reason for no sound in CarPlay navigation when connected?

It may be due to a disconnection or signal loss. Here is the relevant introduction: CarPlay: What is CarPlay? It is an in-car system launched by Apple Inc. in the United States. This in-car system can connect with a smartphone, offering great convenience. It can be connected either via a wired or wireless method, allowing the smartphone's screen to be mirrored onto the car's central control screen and enabling the use of related functions on the phone. It is an excellent in-car system. Solution: You need to disconnect the phone from the car's system and reconnect them. After disconnecting the phone and the car's system, restart both the phone and the car's system, then reconnect them. Alternatively, reset the car's system to factory settings and then reconnect it with the phone.
1
2
Share

Is the engine speed not allowed to exceed 2000 rpm in Subject 3?

Engine speed should be kept below 2000 rpm, exceeding which will result in a failing judgment. Here are the relevant details: Introduction: Engine speed exceeding 2000 rpm is considered low-gear high-speed. During the test, engine speed should be maintained around 1500 rpm. If the engine reaches around 1800 rpm, it indicates the need to shift up. Excessive fuel consumption: Failing to shift gears when exceeding 2000 rpm in low-speed gears constitutes lugging the engine. Low-gear high-lug operation forces the engine to run at excessively high speeds. Each engine has its specific speed and power characteristics. Once it exceeds the optimal operating range, fuel consumption increases sharply. Additionally, ultra-high-speed operation places excessive stress on engine components.
3
1
Share

How many points are deducted for crossing the line at a traffic light?

Changing lanes by crossing a solid line at a traffic light results in a deduction of 3 points. At traffic signal intersections, lane changes and crossing lines can easily cause minor traffic accidents. If caught by "electronic police," a fine will be imposed along with a deduction of 3 points. Vehicles crossing the solid yellow line and driving in the opposite direction will also be fined and receive a 3-point deduction. Vehicles not driving in the designated lane, such as choosing to go straight from a left-turn lane, will be fined and receive a 2-point deduction. Violating prohibitive markings refers to actions such as crossing solid lines to change lanes, making U-turns where not allowed, or turning where prohibited, all of which are considered violations of prohibitive markings. In emergencies, immediately call the police to have traffic officers direct traffic on-site. If a vehicle breaks down and crosses the line, the hazard warning lights must be turned on, and the traffic police should be notified as soon as possible to prevent traffic congestion. If a traffic accident is caused by changing lanes over a solid line before a traffic light, the driver will be held responsible for the accident.
6
0
Share

Are There Any Loopholes in the Electronic Monitoring of Subject Three?

No. Below is a detailed introduction to the relevant information: Introduction: The road driving skills test for Subject Three generally includes: vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Notes: Candidates must complete the corresponding lighting operations according to the voice prompts. It is essential to be very familiar with these operations and not make any mistakes. Answering one question incorrectly will deduct 100 points, wasting a precious exam opportunity! Therefore, familiarizing yourself with the lighting operations before the exam will basically prevent you from failing on this aspect.
7
2
Share

What Happens When the Intake Manifold Pressure Sensor is Damaged?

When the intake manifold pressure sensor is damaged, it will be unable to calculate air flow, resulting in issues such as no idle, weak acceleration, unstable engine operation, backfiring during rapid acceleration, and popping (due to either too lean or too rich air-fuel mixture). The ECU relies on three key components for its operation: the coolant temperature sensor, the intake pressure sensor, and the crankshaft position sensor. If the intake pressure sensor is damaged, the ECU loses accurate data on the intake air volume, leading to malfunctions. The intake pressure sensor, also known as MAP (Manifold Absolute Pressure), connects to the intake manifold via a vacuum hose. It senses changes in vacuum within the intake manifold as engine speed and load vary, converting these changes into voltage signals through internal resistance adjustments. These signals help the ECU adjust fuel injection and ignition timing. In carbureted or throttle body fuel-injected engines, the intake manifold refers to the pathway from the carburetor or throttle body to the cylinder head intake ports. Its function is to distribute the air-fuel mixture from the carburetor or throttle body to each cylinder's intake port. In port fuel-injected engines or diesel engines, the intake manifold solely distributes clean air to each cylinder's intake port. The intake manifold must distribute the air-fuel mixture or clean air as evenly as possible to each cylinder. To achieve this, the lengths of the gas flow paths inside the intake manifold should be as equal as possible. Solution for a damaged intake manifold pressure sensor: It is necessary to promptly visit a local 4S shop for inspection and repair.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.