How to turn on the fog lights on the Hongqi H5?

2 Answers
FrankDella
07/28/25 8:18pm
The Hongqi H5 has fog light buttons labeled near the instrument panel. After turning on the lights, press the front fog light button to activate the front fog lights; press the rear fog light button to activate the rear fog lights. Below are the conditions for turning on fog lights: 1. According to traffic regulations, when visibility is between 100-200m, fog lights, low beams, width lights, and tail lights must be turned on, speed should not exceed 60km/h, and the distance to the vehicle in front should be more than 100m. 2. When visibility is between 50-100m, fog lights, low beams, width lights, and tail lights must be turned on, speed should not exceed 40km/h, and the distance to the vehicle in front should be more than 50m. 3. Under good visibility conditions, fog lights are absolutely not allowed to be used. This is because the red light from fog lights, without obstacles like fog, rain, or snow to attenuate it, directly shines into people's eyes and can cause harm.
Was this review help?
20
2
Share
VanBraxton
08/12/25 1:06am
Turning on the fog lights of the Hongqi H5 is actually quite simple, just like the little tricks I often use in the car. You need to start with the stalk on the left side of the steering wheel: first turn on the headlights by rotating the stalk to the headlight icon position. Then, another ring or button on the stalk should be turned to the position with the fog light symbol, like a small 'S' or a pattern with lines, and a green indicator light on the dashboard will confirm that it's on. It's very useful in heavy fog or rain, helping others see you clearly, but avoid using it in clear weather to prevent glare and ensure safety. Regularly check if the bulbs are functioning properly to avoid burnout. The design of the Hongqi H5 is quite user-friendly, and the smooth operation gives me peace of mind. If there's no response, refer to the owner's manual or visit a repair shop to check for circuit issues. Remember, safety comes first—make it a habit to check the lighting system before every drive to ensure a worry-free trip.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

Can Electric Suction Doors Be Forcibly Closed?

Electric suction doors can be forcibly closed. Here is more information about electric suction doors: 1. Introduction: Electric suction doors refer to a configuration where the door automatically closes until fully shut if it is not properly closed. This is a common comfort and safety feature in luxury cars, typically found in models such as the Mercedes S-Class, BMW 7 Series, Audi A8, Audi Q7, Lexus LS series, and all Bentley models. 2. Working Principle: The working principle of electric suction doors involves an electromagnetic coil installed on the door frame (or door edge). When the door is opened, current flows through the coil, creating an electromagnetic field. Due to this magnetic force, when the door is close enough to the frame, it automatically seals shut.
8
5
Share

Why Won't the Honda Fit Lock Cylinder Turn?

Honda Fit lock cylinder may not turn due to rust inside the lock cylinder or damage to a certain component. Below is an introduction to the related content of Honda XRV: 1. Power: The Honda XRV is equipped with a 1.5T turbocharged engine that meets the National VI emission standard, with a maximum power of 177 horsepower. The transmission system continues to match with a 6-speed manual and CVT gearbox. 2. Design: The rear bumper of the Honda XRV is decorated with chrome trim, enhancing the sense of refinement; in terms of the exhaust system, the new car will provide either dual exhaust pipes or single exhaust pipe depending on the model. The interior design of the Honda XRV continues the current design style, with a simple center console shape and a reasonable layout of functional areas.
1
4
Share

How Often Should the Factory Spark Plugs Be Replaced on the 10th-Generation Civic?

The factory spark plugs for the 10th-generation Civic should be replaced every 100,000 kilometers. The standard for the factory spark plugs in the 10th-generation Civic is typically characterized by the heat range, which represents the thermal characteristics of the spark plug. The heat range indicates the balance between heat absorption and dissipation in the insulator nose of the spark plug. A higher heat range signifies a stronger balance between heat absorption and dissipation. Hot-type spark plugs have a lower heat range, while cold-type spark plugs have a higher heat range. Spark plugs are a crucial part of the engine's ignition system, primarily responsible for introducing the high voltage from the ignition coil into the engine cylinder, generating a spark across the electrode gap to ignite the air-fuel mixture inside the engine, thereby providing power to the vehicle.
10
5
Share

How to check the tire pressure monitoring system in the 2020 Outlander?

The Outlander is equipped with a tire pressure warning system that automatically alerts the driver when the tire pressure is too high or too low. Here is some relevant information: 1. Structure and principle of the tire pressure monitoring system: The central processing unit sends low-frequency commands via an antenna to activate the tire pressure sensors. Once awakened, the tire pressure sensors transmit high-frequency signals containing their own identifiers back to the central processing unit via the antenna. 2. Direct tire pressure monitoring system: The direct tire pressure monitoring system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is then transmitted wirelessly from inside the tire to a central receiver module, which displays the tire pressure data for each tire. The system will automatically issue a warning if the tire pressure is too low or if there is a leak.
8
4
Share

Why Does the Valve Cover Gasket Keep Leaking Oil After Replacement?

The reasons for continued oil leakage after replacing the valve cover gasket include the following: 1. The crankcase forced ventilation valve is blocked, causing increased crankcase pressure, which then releases through the valve cover gasket or other weak points, resulting in oil leakage. 2. The valve cover gasket has aged, leading to poor sealing. 3. If the crankcase ventilation valve is clogged, or if the piston rings and cylinder wall gaps are too large, causing excessive blow-by gas, the high crankcase pressure will force gas to escape through weak sealing points, such as the valve cover gasket or front/rear crankshaft oil seals, resulting in engine oil leakage.
12
2
Share

What causes the automatic headlight malfunction in the Audi A3?

Audi A3 automatic headlight malfunction is caused by interference from strong searchlights on the road at night affecting the light sensor of the automatic headlights. Below is an introduction to related aspects of the Audi A3: 1. Development Platform: The Audi A3 is developed based on the Volkswagen MQB platform. 2. Body Design: The body features lightweight design and aluminum materials. 3. Powertrain: It is equipped with multiple engines including 1.4TFSI and 1.8TFSI. The front suspension of the Audi A3 chassis is MacPherson strut type, and the rear axle adopts a torsion and crank-type structure with separately arranged springs and shock absorbers.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.