How to Turn on the Fog Lights on the Geely Boyue?

2 Answers
AveryLynn
07/23/25 8:11pm
Geely Boyue's fog light switch is located on the left-hand side of the vehicle's light control lever. The prerequisite for turning on the fog lights is to activate the parking lights or headlights. More information about fog lights is as follows: 1. Fog lights are only turned on in hazy conditions. When encountering heavy fog with very low visibility, these lights must be turned on so that your vehicle can be seen by other cars. In conditions other than haze, when visibility is normal, please make sure to turn off the fog lights, as their brightness and penetration are very high, which can dazzle other drivers, especially the rear fog lights, which can reduce the warning effect of the brake lights. Turning on the rear fog lights in good visibility conditions increases the risk of being rear-ended. 2. In foggy or rainy conditions with low visibility, front fog lights can assist the headlights, while rear fog lights alert vehicles behind of your presence. 3. Fog lights are generally used on highways. Public security authorities also stipulate that vehicles without rear fog lights are not allowed to drive on highways.
Was this review help?
10
2
Share
MacFrank
08/10/25 6:09pm
I drive a Geely Boyue, and knowing how to turn on the fog lights is especially important in foggy weather. The operation is actually quite simple: start with the light control stalk on the left side of the steering wheel. First, turn on the headlights by rotating the switch to the on position or AUTO mode (if supported). Here’s the key part: the stalk usually has a push-pull section—push it forward once to turn on the front fog lights, and push or pull it again to activate the rear fog lights. Remember, using fog lights in foggy conditions improves visibility and helps avoid accidents, but don’t overuse them—the rear fog lights are very bright and can distract drivers behind you. Safe driving is my top priority; if you’re unsure, check the manual or look it up on your phone. In short, practice makes perfect—try it a few times, and you’ll get the hang of it.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

What brand of engine is used in the Bestune T77?

The engine brand of the Bestune T77 is FAW Bestune, which is entirely independently developed and is a domestic engine. The engine model used in the Bestune T77 is CA4GB15TD-30, with a maximum horsepower of 169 hp, a maximum power of 124 KW, a maximum power speed of 5500 rpm, and a peak torque of 258 Nm. For the daily maintenance of the Bestune T77's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder generated by component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
4
1
Share

What Could Be the Reasons for a Motorcycle That Can Start but Not Move?

Motorcycle can start but not move may be due to damaged automatic centrifugal clutch, broken transmission belt, insufficient piston thrust, carburetor water ingress or blockage, or burnt spark plug. Damaged automatic centrifugal clutch: Improper clutch operation or failure to return to position causing the motorcycle to start but not accelerate or move. A faulty automatic centrifugal clutch needs replacement or repair. Broken transmission belt: Generally caused by a faulty pulley or belt, which requires opening the rear transmission system for inspection. If the belt is broken or has significant gaps, a new belt must be replaced. Insufficient piston thrust: Lean fuel mixture causing insufficient gas thrust on the piston after ignition, leading to prolonged combustion time and engine overheating. Carburetor water ingress or blockage, burnt spark plug: Check if the fuel line is blocked. Loosen the bottom screw of the carburetor to let the gasoline flow for a while before tightening it. If dirt has entered the carburetor, check the spark plug. The carburetor needs cleaning or replacement after prolonged use, and a burnt spark plug must be replaced promptly.
3
3
Share

Can driving license points be deducted in a different location?

Driving license points can be deducted in a different location. Driving licenses are valid nationwide, meaning any legally issued and valid driving license can be used in any province, city, or area within mainland China. Documents required for point deduction: To deduct points from a driving license, you need to bring the original and duplicate of the vehicle registration certificate of the offending vehicle, the original and duplicate of the driving license, cash or a bank card designated by the traffic police department, and go to the service hall of the traffic management department to handle the procedure. The license holder must be present in person. Personal signature is required, and the license holder must appear in person and present their ID card. Points cannot be replenished: Within one cycle, if the points deducted from the driving license are less than 12, the penalty must be paid in full, and the points will be cleared in the next cycle; if the points deducted reach 12, the driver must attend a seven-day study and examination on road traffic safety laws, regulations, and related knowledge at the place where the motor vehicle driving license was issued within fifteen days.
2
4
Share

What are the characteristics of car series from different countries?

Characteristics of car series from different countries: Asian cars have low cost and small displacement; American cars have large displacement and high horsepower; European cars offer spacious interiors and advanced technology. Asian cars: The design philosophy focuses on 'two small and one large,' meaning minimal fuel consumption, minimal usage costs, and maximum comfort and convenience. They typically feature small-displacement engines with highly advanced fuel-saving technology, low maintenance and repair costs, and very low usage expenses. The material selection is very scientific, excelling in creating a comfortable and cozy atmosphere with numerous storage compartments and comfort-oriented electronic features, emphasizing maximum comfort and convenience. American cars: The most notable features of American cars are their emphasis on comfort and power, along with safety. They boast excellent suspension systems and noise insulation design, with engines that prioritize large displacement and high horsepower, along with very good safety performance. European cars: European cars offer a wide range of options. The European philosophy in car manufacturing emphasizes advanced technology and high safety standards. The designs are rigorous and scientific, with very reliable quality and advanced technology. They adhere to strict manufacturing techniques, component production, and material selection, ensuring excellent technical performance and durability.
7
3
Share

What is the process for license plate registration after picking up the car?

Below is the process for license plate registration after picking up the car: 1. Obtain the vehicle qualification certificate. The vehicle qualification certificate is very important as the vehicle must be registered. Currently, some car 4S stores delay providing the vehicle qualification certificate, which can postpone the registration process. Therefore, it is necessary to obtain the vehicle qualification certificate as soon as possible by communicating more with the 4S store and being firm in your approach; otherwise, the 4S store may delay providing it for several days. 2. Keep the triplicate car purchase invoice. After purchasing the car, the 4S store will issue a triplicate car purchase invoice, which must be kept properly as it will be used in subsequent registration processes. The invoice consists of red, yellow, and blue copies, with the red and yellow copies usually submitted and the yellow copy retained by the buyer. 3. Pay the vehicle purchase tax and obtain the original and duplicate tax certificates. After purchasing the vehicle, it is necessary to pay the vehicle purchase tax as soon as possible, usually at the nearest vehicle management office. After successfully paying the vehicle purchase tax, the original and duplicate tax certificates will be issued, which should be kept safely. 4. Prepare various documents in advance. Prepare the original ID card and copies (make several copies for backup). Non-local residents need to provide the original and copies of the temporary residence permit. 5. Choose the vehicle license plate number. Once all procedures are complete, you can go to the vehicle management office to register and apply for a license plate. First, a specialized traffic police officer will inspect the vehicle, mainly checking the vehicle identification code, vehicle appearance, and the vehicle's warning triangle plate, which should be prepared in advance. 6. Pay the fee and wait to receive the license plate. After the vehicle inspection, you can go to the vehicle management office hall to select a license plate number. Generally, there are two options: self-selection or random selection, and you can choose either method.
8
2
Share

What are the common issues causing uneven wear on rear tires?

Uneven wear on rear tires is generally caused by abnormal tire pressure, tire dynamic imbalance issues, wheel alignment problems, or suspension issues. Abnormal tire pressure: Either there's excessive difference in pressure among the four tires. Overinflation causes severe wear on the central part of the tire, while underinflation leads to severe wear on both sides. Solution: Adjust all four tires to the appropriate pressure. Tire dynamic imbalance issues: If there's a problem with tire dynamic balance, the tire may show patchy wear patterns. Solution: Rebalance the tires. Wheel alignment problems: If there are wheel alignment issues, one side of the tire may wear more significantly. Excessive camber causes severe outer edge wear, while insufficient camber leads to severe inner edge wear. Solution: Perform wheel alignment again. Suspension issues: Such as loose ball joints or misaligned front suspension systems. In fact, inaccurate wheel alignment also falls under suspension problems. Suspension issues may cause sawtooth wear patterns on the tire tread or excessive wear on individual tires. Solution: First inspect the condition of independent suspension springs and shock absorbers to identify the specific problem.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.