···
Log in / Register

How to Turn On the Fog Lights on the Buick Excelle?

4 Answers
LucilleRose
07/30/25 2:48am

To turn on the fog lights of the Buick Excelle, rotate the knob switch on the left side of the instrument panel to the front and rear fog light positions. The Buick Excelle is a compact 4-door, 5-seater sedan with the following body dimensions: length 4609mm, width 1798mm, height 1486mm, and a wheelbase of 2640mm. It is equipped with a 1.3T turbocharged engine delivering a maximum power of 120 kW and a maximum torque of 230 N·m. The vehicle features a front-wheel-drive layout, with a MacPherson strut independent front suspension and a multi-link independent rear suspension.

Was this review help?
8
1
Share
FelixFitz
08/16/25 9:06am

I've been driving a Buick Excelle for several years and would like to share the steps for turning on the fog lights. First, start the engine, but don't rush to turn on the lights. Then locate the light control lever on the left side of the steering wheel and twist it to the headlight position to turn on the main beams. After that, gently pull or rotate this lever outward until you hear a click, indicating the fog lights are activated. There should be a green or yellow indicator light on the dashboard. Remember to only use them in bad weather conditions, such as heavy fog or rain, and avoid using them on sunny days to prevent excessive brightness that might disturb others. I regularly check the lighting system, and turning on the fog lights significantly improves visibility. However, make sure to turn them off when not in use to avoid wasting electricity. During regular maintenance, ask the technician to check the fog light functionality to ensure they work properly when needed.

Was this review help?
16
4
Share
Expand All
DeJuliana
10/21/25 8:22am

Operating the fog lights on a Buick Excelle is straightforward, but safety rules must be observed. After starting the vehicle, manipulate the light stalk to ensure the fog light switch is activated only when the low beams are on. The switch is typically a rotary knob or push-button—just a gentle flick will do. I activate them in low-visibility conditions like fog or heavy rain, as the lights can penetrate the mist. After turning them on, verify that the dashboard indicator illuminates. Avoid unnecessary use to prevent glare and comply with traffic regulations. Cultivate good driving habits, such as checking the light switch position before driving.

Was this review help?
4
2
Share
Expand All
StChase
12/05/25 2:03am

If you don't know how to turn on the fog lights of the Excelle, try this sequence: After ignition, first rotate the light lever until the headlights come on. Then toggle the end part of the lever or press the dedicated button to activate the fog lights. Be gentle with the action and confirm that the indicator light on the dashboard responds. If it doesn't turn on, check whether the headlights are off or the switch is stuck, and address it promptly. Once activated, they are very helpful in severe weather conditions.

Was this review help?
5
2
Share
Expand All
More Forum Discussions

Where is the engine number located on the Compass?

The engine number of the Compass is generally located on the side of the engine cylinder block, marked on an aluminum or iron plate, typically consisting of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked in the following 4 ways: The vehicle's driving license prints the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will specify the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and engine models can be the same. The engine number, however, refers to the production serial number of the engine, where each engine can only have one unique engine number, and no two engines share the same number.
5
5
Share

What to Do If Someone Maliciously Scratches Your Car?

If your car has been maliciously scratched, you should report it to the police immediately. Here are specific details about malicious scratching: 1. Laws and Regulations: Intentionally damaging public or private property, if the amount involved is relatively large or there are other serious circumstances, is punishable by up to three years in prison, detention, or a fine. If the amount is huge or there are other particularly serious circumstances, the punishment can range from three to seven years in prison. The police will decide how to deal with the perpetrator based on the extent of the damage, the actual situation, and specific circumstances. 2. If the perpetrator cannot be found: If the car was parked in a residential area and was parked in the designated spot by the property management, the property management should also bear some responsibility. If the car was parked in a parking lot, you can also hold the management accountable.
3
2
Share

How to Quickly Remove Frost from Car Windows?

Methods to quickly remove frost from car windows are as follows: 1. Use the built-in defroster: First, turn on the air conditioning button inside the car, switch the air circulation mode to external circulation, and wait a moment for the frost to disappear. However, this method has a drawback: using the air conditioning button in winter will inevitably increase fuel consumption, and switching to external circulation will cause the temperature inside the car to drop suddenly, making it unsuitable for long drives. 2. Open the windows: The fastest and most effective emergency method is to roll down the windows, allowing the wind inside and outside the car to circulate for a minute or two, and the frost will naturally disappear. This saves time and does not increase fuel consumption. 3. Turn on the heater: Simply turn on the heater inside the car and adjust the airflow direction to blow directly onto the windows. The heater can effectively dry the air inside the car, and once the air is dry, frost will not form on the windows. However, this method also has a drawback: when starting the car in winter, the water temperature inside the car has not yet reached the normal level, so the air blown out at this time is not warm.
12
0
Share

Is the Shadow Leopard a joint venture car?

Shadow Leopard is a domestic car. Here are the extended details: Body parameters: Taking the Shadow Leopard 2021 270T Shadow Leopard J10 Flyer Edition as an example, its body length, width, and height are 4700mm, 1850mm, and 1432mm respectively, with a wheelbase of 2736mm. Power aspects: It is equipped with a 1.5T turbocharged engine, matched with a 7-speed wet dual-clutch transmission, and the body structure is a 4-door 5-seater sedan. The maximum horsepower of the Shadow Leopard 2021 270T Shadow Leopard J10 Flyer Edition is 177ps, the maximum power is 130kw, the maximum torque is 270nm, the front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
18
0
Share

Reasons for White Smoke from Diesel Engines?

Here are the detailed explanations for the causes of white smoke from diesel engines: 1. Light white smoke, water in diesel fuel: Diesel fuel needs to settle for 24 hours before use. When refueling, avoid inserting the fuel pump to the bottom of the diesel barrel. Damaged or missing fuel tank caps should be promptly replaced. Poor sealing of the cylinder head gasket or cracks in the bottom of the cylinder head can cause coolant from the water jacket to leak into the cylinder, forming water vapor and resulting in white smoke. Locate the leakage point and repair or replace the relevant parts. 2. White smoke: When the temperature is too low, some diesel fuel may not ignite and burn, producing white smoke. This white smoke will disappear on its own as the engine temperature rises, which is a normal condition and does not require troubleshooting. Low injection pressure, severe dripping of the injector, or excessively low injector pressure adjustment can cause some diesel fuel mist to fail to ignite and burn in the combustion chamber, resulting in white smoke.
1
4
Share

The Difference Between Direct Injection and Multi-Point Fuel Injection

Here are the differences between direct injection and multi-point fuel injection: 1. Fuel Consumption: Direct injection has lower fuel consumption, while multi-point fuel injection has lower requirements for fuel quality. 2. Components: Both direct injection and multi-point fuel injection have complex structures and higher costs. 3. Operation: In a direct injection engine, high-pressure fuel is injected into the combustion chamber in a fine mist. As it evaporates, it absorbs heat, cooling the cylinder and thereby reducing emissions. Multi-point fuel injection involves injectors installed on the intake pipe of each cylinder, with fuel sprayed into the cylinder from multiple locations. 4. Technical Requirements: Direct injection technology has higher requirements, with the main technical challenge being the achievement of stratified combustion. While multi-point fuel injection improves upon the uneven mixture distribution issue of single-point injection, it does not enhance fuel atomization or air-fuel mixing.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.