How to Turn on the Fog Lights on the Buick Excelle?

1 Answers
Damian
07/29/25 11:16pm
The method to turn on the rear fog lights of the Buick Excelle is: Press button 6 to activate the fog lights. When the fog lights are on, the indicator light on the combination instrument panel will illuminate. The rear fog lights can only be turned on when the headlights are on, which means the light switch is rotated to position 3. The rear fog lights can be turned off independently of any other lights. Below is an introduction to the Buick Excelle: 1. The new Excelle remains largely consistent with the current model. The front face features a winged chrome grille, giving it a more refined look, while the black vertical grille exudes a sense of power. The headlights on both sides adopt a hook-shaped design, adding a touch of agility. The main control area is accented with silver lines, enhancing the sense of layering and texture. The center console is equipped with a 7-inch high-definition touchscreen, and the seats are upholstered in fashionable brown genuine leather, creating a premium car ambiance. 2. The new Excelle focuses on eConnect connectivity technology. This technology enables remote operations, over-the-air updates, personalized account settings, in-car apps, and many other applications, all accessible through the 7-inch center console touchscreen with a card-style interface. 3. In terms of power, both new models are equipped with GM's latest 1.0T three-cylinder engine, delivering 91kW (125PS) and 170Nm of torque, paired with a 6-speed dual-clutch transmission.
Was this review help?
15
1
Share
More Forum Discussions

What are the effects after a vehicle is flooded?

It can cause a short circuit. After flooding, sewage can enter the vehicle's electrical appliances or wiring. Below are the detailed explanations of related content: Introduction: Residual moisture in the vehicle's circuits can cause short circuits. After flooding, sewage will enter the vehicle's electrical appliances or wiring. This moisture must be thoroughly dried and removed, ensuring complete insulation. Any moisture inside components like the fuse box must be completely removed! You can drive away immediately if the situation is minor. However, if the water level has risen inside the vehicle, it's best to just briefly assess the damage and avoid starting the vehicle. Starting the engine at this point could very likely cause secondary damage to the engine, affecting later insurance claims. Impact: Because water has entered the engine's intake, it can reach the combustion chamber. Since water is poorly compressible, once it enters the combustion chamber, it can cause the engine's pistons to bend, rendering the engine completely inoperable and requiring major repairs. In such cases, remember not to start the car. Immediately call your insurance company to report the flooding situation and have them arrange for a tow truck (insurance companies usually provide free towing within 50 to 100 kilometers in urban areas) to take the vehicle to a repair shop for inspection and repairs.
19
3
Share

What is the standard tire pressure for car tires?

Normal range of tire pressure: According to the regulations and requirements of the international GBT2978-2008 standard, the tire pressure for different tires is as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Abnormal tire pressure generally has the following three reasons: Tire pressure abnormality: Generally, an alarm will be triggered if the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure fault light to turn on. For sensor damage issues, only replacement with a new component is possible.
18
5
Share

What are the new regulations for wheel modification?

The new regulations state that passenger cars can install roof racks not exceeding 30cm in height, provided that safety and firmness are ensured. Below are the specific details: Changing wheel styles: The new regulations have relaxed the rules for wheel modifications. As long as the size and specifications of the wheels match those on the registration certificate, the style can be changed, and it is even permissible for all four wheels to have different styles. Adding side steps: This new regulation mainly applies to SUV and MPV models. The height of any added roof rack must be within 300 millimeters, and the width of side steps must not extend more than 5 centimeters beyond the side profile of the vehicle. Changing vehicle color: The vehicle color can be altered through painting or wrapping, but the changes must be registered with the vehicle management office within ten days. It is important to note that colors resembling those of emergency vehicles such as police cars or fire trucks are prohibited.
3
5
Share

Can I Bring a Seat Cushion for the Subject 2 Driving Test?

You can bring a seat cushion for the Subject 2 driving test. The Subject 2 test mainly assesses the examinee's ability to control the vehicle in a semi-clutch state and their parking skills. Key points to note for Subject 2: Preparation before starting: Fasten the seatbelt, adjust the seat to the position used during practice, then adjust the rearview mirror for optimal visibility. Confirm with the examiner that you can start the test, then follow the voice prompts. Generally, the training vehicle is already running, so press the clutch and brake, release the handbrake, shift to first gear, and slowly lift the clutch until the vehicle vibrates, then release the brake and slowly move into the test area. If the training vehicle is off, first press the clutch and brake, shift to neutral, start the engine, and then proceed with the above steps. Reverse parking: Drive to the stop line for right-side parking, stop when your shoulder aligns with the stop line, shift to reverse gear, and start reversing into the space. Once inside, ensure the vehicle is straight without unnecessary turns, then stop at the designated point. Shift to first gear to exit, drive to the left-side parking control line, stop when your shoulder aligns with the control line, shift to reverse gear, and start reversing into the left space. After parking, drive forward to exit. Throughout the process, avoid stopping midway, rolling, stalling, or crossing lines. Parallel parking: When entering the parallel parking test area, use the wiper's raised part as a reference to align with the road edge, or use the rearview mirror to maintain a 30 cm distance between the vehicle and the parking space line. Stop when your shoulder aligns with the parallel parking control line, press the clutch and brake, shift to reverse gear, and start parallel parking. The parking must be completed in one attempt without stopping, rolling, stalling, or crossing lines. Curve driving: Before entering the curve driving test area, position the vehicle slightly to the left, then drive through the curve and exit at the other end. Maintain a slow and steady speed during the test, carefully navigating each curve. Avoid stopping, rolling, stalling, or crossing lines throughout the process.
12
4
Share

What Causes the Clicking Sound When the Wiper Returns to Its Position?

Key areas to inspect include whether the wiper is properly positioned and if the wiper blade is aged. Below are detailed explanations of the related issues: Causes: It is highly likely due to wear or deformation of the wiper rubber, excessive resistance of the wiper, or slight deformation of the wiper arm from prolonged use, causing a rattling sound during operation. In such cases, simply prepare a wrench. If the wiper makes a rattling sound when moving upwards, use the wrench to gently twist the wiper arm inward toward the windshield. Wiper Rubber: Noise caused by issues with the wiper rubber itself. Since the wiper blade is made of rubber, prolonged use can lead to aging and hardening. Problems arising from extended use can only be resolved by replacing the blade. Proper wiping technique: The edge of the wiper blade should perform a dragging or sweeping motion on the windshield. Incorrect installation of a new blade can also cause noise.
17
5
Share

Must the driver's license photo have a white background?

Driver's license photos must have a white background. Below is relevant information about driver's licenses: Driving requirements: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the permissible driving scope of a C1 driver's license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Based on this standard, a C1 license does not permit driving vehicles with more than 9 seats. Requirements for test vehicles: Light ordinary cargo vehicles with a length of no less than 5 meters, or small ordinary passenger vehicles with a length of no less than 4 meters, or cars with a length of no less than 4 meters.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.