How to Turn on the Fog Lights on the Buick Excelle?

2 Answers
FinleyLee
07/29/25 3:16am
The front fog light switch is located on the light control lever on the left side of the steering wheel, specifically on the inner rotary ring. The rear fog light switch is positioned on the center console panel. The vehicle's user manual provides detailed instructions. Note that the rear fog lights can only be activated when the front fog lights are turned on; they cannot be operated independently. Here's a step-by-step guide to turning on the fog lights on the Buick Excelle: 1. To activate the fog lights, first turn on the vehicle's lights, i.e., the position lights. Locate the fog light symbol on the light control lever and push it forward; 2. Then, rotate the control ring to align the rear fog light symbol with the activation point. At this point, the rear fog light indicator will appear on the instrument panel; 3. The front fog lights can be turned on individually, whereas the rear fog lights can only be activated in conjunction with the front fog lights and cannot be operated alone.
Was this review help?
10
4
Share
SanAmelia
08/12/25 7:07am
Turning on the fog lights is actually quite straightforward. I remember when driving my own Buick Excelle, there's a light stalk on the left side of the steering wheel with a rotary knob - just turn it to the fog light icon position. Usually, you need to turn on the low beams first, and then there might be a small toggle on the stalk to switch between front and rear fog lights. Take some time to practice the operation so you won't panic when actually encountering heavy fog. Also note that fog lights are very bright - try to only use them in foggy conditions or low visibility. Using them normally can dazzle other drivers and increase accident risks. During regular maintenance, check the fog light bulbs to ensure they haven't aged without you realizing. Develop good habits - safety first.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

How tall is the Range Rover?

The dimensions of the Range Rover are 5000/2073/1869mm (length/width/height), with a wheelbase of 2922mm. It is a mid-to-large-sized SUV equipped with a full-time four-wheel-drive system. Introduction: Land Rover is a British brand specializing in all-terrain vehicles and sport utility vehicles (SUVs), under the ownership of Jaguar Land Rover. Its current lineup includes the Range Rover series, Discovery series, and Defender series. Development: Launched in 1948, Land Rover pioneered civilian all-terrain special vehicles and was the first automobile to successfully traverse the notoriously challenging jungles and wilderness of Central America. Originally named as a single model under the Rover Company, Land Rover gradually evolved into a standalone brand. Goals: On February 15, 2021, during Jaguar Land Rover's global press conference, CEO Thierry Bolloré announced that the Land Rover brand will launch six pure electric vehicle models within the next five years. Starting from 2026, the company plans to phase out diesel models, achieve zero tailpipe emissions by 2036, and reach net-zero carbon emissions by 2039.
12
3
Share

What is the GTX car?

GTX is a muscle car. More information about muscle cars is as follows: 1. The term "muscle car" emerged in the 1980s and 1990s, specifically used to refer to a type of American rear-wheel-drive car from the 1960s and 1970s that featured large-displacement V8 engines, powerful horsepower, and a muscular appearance. 2. Today, it is also used to describe currently available American economy sports cars equipped with V8 engines. Muscle cars represent a generation of American spirit, with models like the Ford Mustang, Chevrolet Camaro, and Dodge Challenger being typical pony cars rather than purebred muscle cars.
6
5
Share

Where is the spare key for a general car?

The spare key for a car is located inside a small shelf on the top of the vehicle. You need to find a rectangular small hole at the end of the car handle, pull the handle outward, insert the spare key into the rectangular hole, and remove the plug cover. Below is an introduction about car keys: 1. Basic principle: A weak radio wave is emitted from the owner, received by the car antenna, the signal code is identified by the electronic controller ECU, and then the actuator (motor or electromagnetic manager coil) of the system performs the action of opening/closing the lock. 2. Composition: This system mainly consists of two parts: the transmitter and the receiver.
15
1
Share

Where is the ESP switch located in a car?

Most cars have the ESP switch on the center console to the left of the steering wheel, while some vehicles place it near the gear shift lever on the center console. The location of the ESP switch varies depending on the car model. More information about ESP is as follows: 1. ESP stands for the Electronic Stability Program, which is an active safety feature that is enabled by default and generally does not need to be turned off. 2. The full name of ESP is Electronic Stability Program, often referred to as the Electronic Stability Control System. 3. ESP is an extension of the Anti-lock Braking System (ABS) and Traction Control System (TCS) functions, and it is also part of the vehicle's active safety system. ESP mainly consists of three components: sensors, actuators, and the Electronic Control Unit (ECU).
19
3
Share

Why is there a hump in the rear seat?

The reasons for the rear seat hump are as follows: 1. To increase the height between the car chassis and the ground. The chassis of a family car cannot be too close to the ground, as it would threaten driving safety. Early German car manufacturing used a beam structure, which is crucial for maintaining the integrity of the car body during collisions, thereby protecting passengers inside. Due to the nature of the beam structure, the middle of the rear seat has a hump. 2. To accommodate the exhaust pipe and drive shaft, the rear seat of a car needs to have a certain hump. Most family cars are front-wheel drive and lack a drive shaft mechanism, so some cars do not have a hump in the middle of the rear seat. However, rear-wheel drive and four-wheel drive vehicles must use a drive shaft to power the rear axle, and the exhaust pipe also needs to pass through the middle of the chassis. A groove is designed to accommodate the drive shaft and exhaust pipe, which strengthens the chassis's rigidity and improves the overall safety of the vehicle. The hump in the middle of the rear seat makes the car's layout more reasonable and the chassis safer.
8
1
Share

Should You Shift Gear or Release the Handbrake First When Driving?

When driving, you should shift into gear before releasing the handbrake to prevent the car from rolling forward or backward. Below is the correct driving procedure: 1. Insert the key, turn on the ignition, and start the car; 2. Fully depress the clutch with one foot and press the accelerator with the other, then shift into gear; 3. Release the handbrake, gently press the accelerator, and begin driving. Here is some related information about the handbrake: 1. The technical term for the handbrake is the auxiliary brake. Unlike the main braking system, it uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible. This reduces its effectiveness over time and increases the handbrake's travel distance. 2. The handbrake system also includes a return spring. When the handbrake is engaged, the spring stretches; when released, the spring returns to its original length. With prolonged use, the spring can also undergo deformation.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.