How to Turn on the Fog Lights on the Boyue?

1 Answers
McMaria
07/29/25 1:57pm
To turn on the fog lights on the Boyue, follow these steps: The fog light switch is located on the left-hand side light control lever. Rotate the light control switch until the indicator on the switch points to the corresponding fog light position, then press the switch to turn them on. Fog lights, generally referring to automotive fog lights, are installed at the front and rear of the vehicle to illuminate the road and provide safety warnings during rainy or foggy weather conditions. The Boyue is a model under Geely Auto, with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. In terms of exterior design, the Boyue's front face features Geely's signature "water ripple" grille. Considering the SUV's sense of power, the designers reduced the number of grids, making the overall appearance more concise and the edges more distinct.
Was this review help?
5
0
Share
More Forum Discussions

Why is the car lacking power during acceleration?

Here are the reasons why a car may lack power during acceleration: 1. Ignition system malfunction, such as aging ignition coils or spark plugs that haven't been replaced for a long time, leading to insufficient ignition energy, poor combustion, weak engine acceleration, and the engine warning light coming on; 2. Fuel system failure causing excessively low pressure. Insufficient fuel injection can result in weak engine acceleration; 3. Excessive carbon buildup in the engine, leading to poor fuel atomization, which similarly causes poor combustion, excessive exhaust emissions, and weak engine acceleration; 4. Engine system malfunction, causing the engine to enter an emergency operating mode, thereby limiting engine power output and resulting in weak acceleration. Examples include engine sensor failures, such as oxygen sensors, air flow meters, crankshaft position sensors, knock sensors, etc. Signal faults from these sensors can cause the engine to enter an emergency operating mode, leading to weak acceleration.
14
1
Share

What car is the steering wheel SRS?

Steering wheel SRS refers to the airbag, not a car brand. Below is an introduction to airbags: 1. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, the airbag can reduce head injuries by 25% and facial injuries by approximately 80%. The airbag was first proposed by Hetrick in August 1953 and was granted a U.S. patent for an automotive cushion safety device. 2. The driver-side collision airbag is installed in the steering wheel; the passenger-side collision airbag is generally installed on the dashboard. 3. Airbag sensors are installed on the left, right, and center of the cabin partition; the central airbag sensor and the airbag system are installed together with the electronic control unit. 4. The airbag module mainly consists of the airbag, gas generator, and igniter. The electronic control unit is used for data collection and processing, diagnosing the reliability of the airbag, ensuring that the ignition signal is sent in time when the preset value is reached, and ensuring timely ignition to provide sufficient driving current for the gas generator.
4
2
Share

What to Do About Aging Car Body Seals?

If the window seals are aging, they should be replaced promptly. The process for replacing window seals is as follows: 1. To replace the window seals, the door panel must first be removed. For some vehicles, the window control buttons need to be removed before the door panel can be taken off. 2. Once the door panel is removed, the old seals can be taken out. 3. After that, install the new seals and reattach the door panel. Precautions for window seals: 1. Pay attention to regular maintenance. If you notice any unusual noises or sticking in the windows, you can use a window lubricant. 2. Window lubricant can provide lubrication, reducing friction between the seals and the window glass, effectively eliminating mechanical noise and resolving issues like window squeaking or sticking. 3. Additionally, it can effectively clean window stains, prevent seal aging and corrosion, restore flexibility, prevent seal leakage, and provide functions like moisture-proof sealing.
13
5
Share

How to Remove the Rear Seats of a Volkswagen Magotan?

To remove the rear seats of a Volkswagen Magotan, follow these steps: 1. First, lift the rear seat cushion upwards sharply. There are fixing clips on both sides, approximately at the middle third of the cushion. 2. After removing the clips, there are two U-shaped metal pieces at the back of the cushion. Corresponding to these, there are two metal hooks under the backrest. Push the cushion inward firmly to unhook the metal pieces. 3. Once the cushion is removed, unscrew the three screws under the backrest and lift it upwards to detach the backrest. Here is some additional information about car seats: 1. Car seats can be categorized by shape into split seats and bench seats; by function into fixed, removable, and adjustable seats. 2. By seating capacity, they can be divided into single, double, and multi-person seats. 3. By material, they can be classified into leather seats and fabric seats, among others.
10
0
Share

What are the maintenance items for a new car at 10,000 kilometers?

Here is an introduction to the maintenance items for a new car at 10,000 kilometers: 1. The 10,000-kilometer maintenance is mostly the second maintenance for the car, also known as the second service. However, it is also possible that for some models, the 10,000-kilometer maintenance is the first service. The most basic maintenance items for a new car at 10,000 kilometers include changing the engine oil, oil filter, and inspecting the engine, transmission, air conditioning system, and braking system. 2. In fact, the second maintenance for a new car also includes inspections and maintenance of dozens of items related to multiple systems such as the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires. Additionally, during the 10,000-kilometer maintenance, car owners can consider replacing or cleaning the air and cabin air filters. Although the dealership may not require replacement, considering the current driving environment, these affordable maintenance items that can bring noticeable improvements can be performed in advance.
15
0
Share

Do modern cars still need a break-in period?

It is still advisable to perform a certain break-in period. The details are as follows: 1. Most new cars nowadays undergo a "cold break-in" before leaving the factory. This process involves mounting the engine on a specialized machine and using an electric motor to run it in. During this process, most burrs on the components can be worn away. Since the engine is not operating during the cold break-in, there is no high temperature generated by fuel combustion, hence the term "cold break-in." 2. Not all vehicles undergo a "cold break-in" before leaving the factory, as not all car manufacturers have the technical capabilities for this process. Additionally, performing a "cold break-in" on every engine does not mean that further break-in is unnecessary. You can check your vehicle's user manual for specific details. If you are unsure, it is still best to perform a certain break-in period.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.