How to Turn on the Fog Lights on the Binyue?
3 Answers
Binyue's method of turning on the fog lights: There are fog light buttons on the center console to control the front and rear fog lights. Press the front fog light button once to turn on the front fog lights; press the rear fog light button once to turn on the rear fog lights. To use the fog lights, the headlights must be turned on first. If the headlights are not turned on, the fog lights cannot be activated. When the fog lights are on, corresponding icons will appear on the instrument panel, indicating whether the front or rear fog lights are on. To turn them off, press the button once, and the icons will disappear from the instrument panel. The Geely Binyue is an SUV model, powered by a 1.5T three-cylinder engine jointly developed by Geely and Volvo, with a maximum power of 177 horsepower and a peak torque of 255 Nm, paired with a 7-speed wet dual-clutch transmission.
Back when I drove my Binyue, turning on the fog lights was part of my daily routine. The operation was done via the long lever located at the lower left of the steering wheel. After getting in the car, I would start the engine and turn the key until the dashboard lit up. Usually, I needed to first switch on the low beam, then rotate the small ring on the lever to find the fog light icon position, and gently twist it to activate the fog lights. Remember, the front and rear fog lights might be in different positions, so don't twist too quickly—adjust slowly and confirm they're on by checking the dashboard display. Before driving in foggy conditions, I always tested the bulb function to ensure none were burnt out unnoticed, which could compromise safety. The Binyue's headlight design is overall reasonable, providing soft, non-glaring light that significantly improves visibility in rain or fog. It's also important to develop the habit of checking the control module wiring for aging, as poor contact in older lights can easily lead to issues.
From my perspective, the operation of the Binyue's fog lights emphasizes logical clarity. The control lever is located on the left side of the steering wheel, near the turn signal. After starting the vehicle, first turn on the low beam to ensure basic lighting is functional, then locate the rotating ring on the lever and adjust it to the fog light symbol—usually, you'll hear a crisp click indicating activation. The entire process is as simple as playing with a small gadget, but avoid applying excessive force to prevent damaging the switch. For more comprehensive advice, based on my experience, activating them is most effective in rainy or foggy conditions with visibility below 100 meters. After turning them on, adjust the light angle to avoid excessive upward reflection. If unused for extended periods, remember to periodically power-test the bulbs to prevent unexpected burnout. The Binyue's electronic control system is stable, but always check the fuse before operation to save time and ensure safety.
