How to turn on the fog lights on the Axela?

2 Answers
NaomiMarie
07/24/25 4:56am
Method to turn on the fog lights on the Axela: Pull the light control knob outward once to turn on the front fog lights, and pull it outward again to turn on the rear fog lights. Fog lights generally refer to the fog lights installed on the front and rear of a car, used for road illumination and safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants. The Axela is a compact car under the Mazda brand, which, based on an advanced human-machine interface prioritizing driving safety, first introduced the "MZD Connect Mazda Connect System." The vehicle's configuration consistently reflects a technologically advanced and user-friendly driving experience.
Was this review help?
10
3
Share
LeJackson
08/11/25 12:33am
As someone who frequently commutes with this car, I find turning on the fog lights quite crucial, especially in rainy or foggy conditions, as it enhances safety. The operation method for the Mazda3 is as follows: after getting in the car and starting it, turn the light control stalk on the left side of the steering wheel to the headlight-on position; keep them on. Then, gently pull the control stalk downward once to turn on the front fog lights, and pull it again to activate the rear fog lights. In particularly bad weather, such as heavy rain or dense fog, turning them on makes visibility much clearer and the car more noticeable, helping to avoid accidents. However, I’d like to remind you not to use them unnecessarily on clear days to avoid affecting other drivers' visibility; remember to turn them off after use to save power. I make it a habit to check the switch position before driving to ensure it’s within easy reach, and occasionally wipe off dust to maintain responsiveness. When I first started using them, it took me a few tries to get familiar with the operation. I recommend beginners practice in a safe, open area until they’re comfortable—then they won’t panic in emergencies. The quick response of the lighting system is a pleasant surprise, adding a lot of peace of mind to nighttime driving.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

Will the car move if it's in P mode during automatic car wash?

Automatic car wash in P mode will make the car move. Using P mode during automatic car wash can damage the car. There's no need to engage the handbrake; neutral gear should be used instead. Here are the advantages of fully automatic car wash machines, also known as touchless automatic car wash machines: 1. Touch-free washing without scrubbing, protecting the car paint. Traditional car washing processes usually involve brushes, sponges, or other materials that come into contact with the car body for cleaning. 2. Sand and mud particles on the car body are easily utilized. When washing a particularly dirty car body, sand and mud particles can easily get mixed in and rub against the car paint, acting like abrasive particles in sandpaper.
19
3
Share

What is Automotive Original Paint Repair Technology?

During vehicle usage, accidental collisions or scratches may occur, or the car might be intentionally scratched while stationary, leading to paint peeling. This is when paint repair becomes necessary. The details are as follows: 1. Time Required: Many places still use traditional paint repair methods, which are time-consuming, typically taking 1 to 2 days to complete the repair, followed by advice to avoid washing the car or performing any beauty treatments immediately. In contrast, the Bosch Spectrum Quick Paint Repair only takes 40 minutes to 2 hours, and the car can be washed and undergo beauty treatments right after the repair. 2. Minor Body Scratches: For minor scratches where the damage is limited to the surface layer of the topcoat and does not severely affect the car itself, complete restoration can be achieved through waxing.
5
5
Share

What is the Appropriate Tire Pressure for Cars?

According to the international GBT2978-2008 standard requirements, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: Should not exceed 3.5bar. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates uneven wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting other components' durability; Causes excessive stretching deformation of tire cords, reducing elasticity and increasing load during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass, tires become more susceptible to penetration, potentially causing internal cracks, blowouts, or tire bursts.
14
0
Share

What is the model of Mitsubishi's most advanced engine?

Mitsubishi's 4B11T turbocharged engine is an inline-four configuration. Below are the relevant details: 1. Structure: The Mitsubishi 4B11T turbocharged engine features an inline-four layout, dual overhead camshafts (DOHC), a 16-valve configuration, and incorporates Mitsubishi's MIVEC continuous variable valve timing technology along with a turbocharging system in an all-aluminum engine. Due to its all-aluminum construction, the 4B11T engine is 12 kg lighter than its predecessor, the 4G63T. 2. Performance: The 4B11T engine, used in Mitsubishi EVO models sold in the Japanese market, delivers a maximum power output of 206 kW and a peak torque of 422 Nm, significantly surpassing the 114 kW and 198 Nm maximum power and torque outputs of the standard 4B11 engine.
16
2
Share

Is CVT Type an Automatic Transmission?

CVT belongs to automatic transmission. Vehicle transmissions can be divided into two major categories: manual transmission and automatic transmission. The automatic transmission can be further subdivided into four types: AT (automatic transmission), AMT (semi-automatic transmission), DTC (dual-clutch transmission), and CVT (continuously variable transmission). Advantages and disadvantages of CVT continuously variable transmission: 1. Advantages: Since there are no transmission gears like in conventional automatic transmissions, the accompanying gearshift jerks are eliminated. Therefore, the power output of CVT transmission is linear, providing an exceptionally smooth driving experience in practice. 2. Disadvantages: Compared to traditional automatic transmissions, CVT has not been applied in vehicles for a long time. There are still few CVT-equipped vehicles in the domestic market, which means the maintenance cost of CVT is relatively high, and the probability of problems arising from improper operation is higher.
14
0
Share

Can a small chunk missing from the tire sidewall be repaired?

If a chunk is scraped off the tire and the cords are damaged, it cannot continue to be used. Below are precautions regarding tire usage: 1. Method to determine cord damage: Check whether the cords are damaged by visually inspecting the tire wound for exposed white threads. If white threads are visible, the cords are damaged. Another detection method is to increase the tire pressure by 1-2 kg above the standard pressure, drive briefly to raise the tire temperature, and observe whether the wound changes or bulges. If there is no change, adjust the tire pressure back to the standard value, and the tire can be used for short-distance urban driving. 2. Precautions: Slow down when passing over potholes, speed bumps, or other uneven road surfaces; avoid speeding or overloading; and refrain from sharp turns, rapid acceleration, emergency braking, or driving over curbs.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.