How to Turn on the Fog Lights on a Ford Focus?

1 Answers
DeRylee
07/29/25 4:27pm
The fog light button for the Ford Focus is located on the headlight switch. Turn the switch to the right to the second position for the headlights, then pull up one notch for the front fog lights, and another notch for the rear fog lights. Below is additional information on using the lights in a Ford Focus: 1. The light switch is either a rotary handle or a dial type. Turning it one position activates the parking lights (commonly known as small lights), and turning it further activates both the parking lights and the headlights (commonly known as high beams). Switching between high and low beams is mostly achieved by lifting/pressing the handle. 2. When meeting another vehicle at night, switch to low beams when the oncoming vehicle is more than 150 meters away. 3. Use low beams when meeting non-motorized vehicles on narrow roads or bridges at night. 4. When a motor vehicle passes through an intersection controlled by traffic lights at night, use low beams when turning.
Was this review help?
3
5
Share
More Forum Discussions

What should be noted when temporarily parking?

Temporary parking precautions: 1. When parking in designated spaces, do not park outside the marked lines; 2. When there is no distinction between sidewalk and roadway, park along the right side of the road; 3. When there is a sidewalk, park along the right side of the road; 4. Do not park in areas with no-parking signs. Temporary parking refers to a brief stop on the right side of a road in the direction of traffic flow, on a surface where parking is not prohibited, with the driver remaining in the vehicle. Methods for temporary parking on highways: 1. If the vehicle stops due to a malfunction or obstacle, move it away from the traffic lane and park in the emergency lane or on the right shoulder for repairs; 2. If the vehicle suddenly loses power due to a malfunction and stops directly in the traffic lane, quickly turn on the hazard warning lights, place a warning sign 100 meters behind the vehicle, and have the driver and passengers exit from the right side to the right shoulder, then use the roadside emergency phone to notify traffic management authorities to tow the malfunctioning vehicle away.
17
5
Share

What is the difference between left-hand drive and right-hand drive?

There is no significant difference between left-hand drive and right-hand drive; the operation is the same. It's just that some countries are accustomed to driving on the right, while others drive on the left. In China, regulations stipulate driving on the left to facilitate overtaking and enhance driving safety, hence the driver sits on the left. Additional information: Below is a detailed introduction: 1. Countries where the driver sits on the left are mostly typical continental countries, such as the United States, China, Russia, Germany, France, Brazil, etc.; 2. Countries where the driver sits on the right are mostly typical island nations, peninsulas, or subcontinental countries, such as the United Kingdom, Japan, India, Pakistan, Indonesia, Thailand, Australia, New Zealand, etc.; 3. Whether cars drive on the right or left is not fixed from the beginning but is the result of long-term evolution. In ancient times, road traffic norms were quite localized, both in China and abroad. However, as roads extended and interactions expanded, local habits became regional, and regional habits turned into national norms.
3
3
Share

What is the reason for the discontinuation of the Baojun RS5?

The reason for the discontinuation of the Baojun RS5 is due to its low sales volume, which failed to generate considerable economic benefits, and its relatively lower prospects compared to other models. Below are detailed introductions about the Baojun RS5: 1. Overview: The new Baojun RS-5 is the first compact SUV under the new Baojun brand. On June 9, 2020, the new Baojun RS-5 300T version was officially released, offering two configurations: the Smart Premium and Smart Flagship models. 2. Powertrain: The new Baojun RS-5 is equipped with a newly developed N15T turbocharged engine, delivering a maximum net power of 111kW and a maximum net torque of 250Nm, meeting the China VI B emission standard.
13
5
Share

Focus Throttle Valve Failure Case?

Damage to the throttle position sensor can cause engine shaking and unstable idle. Here are the relevant details: 1. Throttle Valve: Since the throttle position sensor detects the throttle opening signal, the engine control unit adjusts the fuel injection volume and ignition timing based on the throttle opening. If the throttle valve is damaged, the engine control unit cannot correctly receive the throttle opening signal, leading to inaccurate regulation of fuel injection and ignition timing. In severe cases, the engine may fail to start. 2. Fault Symptoms: After starting the car, whether the engine is cold or hot, if the accelerator pedal is quickly pressed and then released, the fault light will illuminate, accompanied by idle shaking and the engine speed being limited to 3000 RPM. At this point, if the car is turned off and restarted, it returns to normal. Upon accessing the engine system, two throttle valve faults are detected.
14
2
Share

Will People Inside a Car Get Injured If the Car Is Struck by Lightning?

People inside a car will not get injured if the car is struck by lightning. During thunderstorms, car owners should pay attention to the following aspects: 1. Close all windows: When encountering thunderstorms, moving vehicles should close all windows to form a sealed enclosure. A closed vehicle acts as a hollow and enclosed conductor. If struck by lightning, the current will travel through the car's surface to the ground, and the occupants inside will not be affected. This is because, according to the principle of electrostatic shielding in physics, the electric field and potential inside a hollow enclosed conductor are zero. 2. Turn off electronic devices: Turn off the radio, GPS, car phone, and other onboard electronic devices, and retract their antennas. Since antennas are conductors with high charge density at their tips, they are more likely to attract lightning.
11
1
Share

How to Repair Air Leakage in the Clutch Slave Cylinder?

Clutch slave cylinder air leakage can be repaired as follows: 1. Replace the slave cylinder assembly: Oil leakage in the clutch slave cylinder is caused by wear of the internal piston, sealing rings, and cups, which fail to contain the clutch fluid. Since spare parts for the clutch slave cylinder are not readily available, it's difficult to source replacement sealing rings, etc. Therefore, the only solution is to replace the entire slave cylinder assembly. 2. Replace the release bearing: Replace the damaged release bearing, bearing cover, and other related damaged components. Causes of clutch slave cylinder air leakage: 1. Aging of the booster pump leading to poor sealing. 2. Insufficient air pressure in the main airbag. Symptoms of clutch slave cylinder air leakage: Mainly difficulty in disengaging the clutch or an unusually heavy pedal feel when pressing the clutch.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.