How to Turn On the Fog Lights on a Buick Excelle?

1 Answers
LaTravis
07/29/25 8:48pm
Excelle fog light activation method: First, turn on the vehicle's lights, i.e., the position lights. Locate the fog light symbol on the light control stalk, push it forward, then rotate the control ring to align the rear fog light symbol with the activation point. At this time, the rear fog light indicator will appear on the instrument panel. The front fog lights can be turned on independently, while the rear fog lights can only be activated simultaneously with the front fog lights and cannot be turned on alone. The Excelle is a premium mid-size sedan launched by SAIC General Motors, with a body length of 4609mm, width of 1798mm, height of 1464mm/1486mm, and a wheelbase of 2640mm. In terms of exterior design, the Excelle features the brand's signature winged chrome grille, giving the front fascia a sharper and more robust appearance. The combination of black piano-key vertical grille and high-gloss chrome winged grille naturally draws the visual focus of the front end to the emblem.
Was this review help?
16
1
Share
More Forum Discussions

What Causes the Rattling Noise in the H6 Transmission?

Here are the reasons for the rattling noise in the H6 transmission: 1. Bearing wear: Loose bearings due to wear, deformation of the shaft or housing causing changes in the center distance between meshing gears and misalignment of axes. 2. Spline groove wear: Wear of the sliding keyway on the shaft and the internal spline groove of the sliding gear; loose fastening bolts in the control mechanism and wear or deformation of the shift fork, leading to gear displacement. 3. Improper operation: Incorrect driver operation, such as aggressive starts or poor coordination between hand and foot during gear shifting, can cause significant impact loads in the transmission, resulting in broken or shattered gear teeth and subsequent noise.
17
0
Share

Which Lane is the Slow Lane?

On roads with two or more motor vehicle lanes in the same direction, the left lane is the fast lane, and the right lane is the slow lane. Related information: 1. Introduction: The fast lane is dedicated to passenger cars, while the slow lane can be used by both passenger cars and trucks. 2. Notes: Motor vehicles driving in the fast lane should maintain the speed specified for the fast lane. If they cannot reach the specified speed, they should move to the slow lane. Motorcycles should drive in the far-right lane. If there are traffic signs indicating speed limits, drivers should adhere to the posted speed limits. When a vehicle in the slow lane needs to overtake the vehicle in front, it may temporarily use the fast lane.
16
5
Share

What is a Car Central Control?

Car central control is the area that manages comfort and entertainment devices such as air conditioning and audio systems in a vehicle. Below is an introduction to car central control: Car Central Control: It includes the central door lock system, which allows the driver to control the opening and closing of all vehicle doors as well as the window lift system. Central Door Lock System: Primarily features three functions: central control, speed control, and individual control. The driver can operate all door locks, and when the vehicle reaches a certain speed, the doors automatically lock. Each door also has independent switches for individual control. The car central control also encompasses the central console, which houses various vehicle controllers like the audio control panel.
8
5
Share

What Causes a Mercedes-Benz to Suddenly Fail to Start?

Here are the specific reasons why a Mercedes-Benz may suddenly fail to start: 1. Ignition wire issues: Problems such as aging wires, incorrect cylinder wire sequence, distributor damage, or loose spark plug caps may occur. When starting the engine, if there is a clear sound of the starter working, it indicates that the power supply is functioning correctly, and the starter is operating normally. The issue might be a blocked fuel line, causing insufficient fuel supply. 2. Incorrect gear position: Normally, the P (Park) or N (Neutral) gear is the starting position for automatic transmission vehicles. If the gear is in R (Reverse) or another position, not only will the car fail to start, but it also poses a safety hazard. If an incorrect gear position is detected, adjust it promptly.
15
1
Share

Does removing the wheel hub cover of Model 3 have any impact?

Removing the wheel hub cover of Model 3 will not have any impact. Below is relevant information about automobile wheel hub covers: 1. Position of wheel hub cover: The wheel hub is connected to the drive shaft, which is tightly fixed by a large screw. Some vehicles have an additional clip inserted into the screw to prevent loosening, and then a cover is placed outside - this cover is the wheel hub cover. 2. Function of wheel hub cover: The main purpose of the wheel hub cover is to enhance the vehicle's aesthetic appearance. Additionally, covering it prevents water from easily entering and causing screw corrosion, thereby providing rust-proof and waterproof protection for the large screw.
2
0
Share

Can Child Safety Seats Be Installed in the Front Passenger Seat?

No. Some child safety seats do not support rear-facing installation, and in the event of an accident, the forward momentum of the child combined with the deployment of the front passenger airbag can still cause harm to the child. Generally, installing the safety seat in the rear row of the cabin is the safest. Below is an introduction to the relevant content: 1. Not recommended: The least recommended position for installation is the front passenger seat or the third row. 2. Common family five-seat cars: There are four positions where safety seats can be installed—the front passenger seat, the left and right sides of the rear row, and the middle of the rear row. Some seven-seat cars also have corresponding installation interfaces in the third row.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.