How to Turn On the Fog Lights on a 2018 Corolla?
3 Answers
The fog light switch of the Corolla is located on the inner side of the control lever. The method to turn them on is as follows: 1. Control by rotation—turn upward once to activate the front fog lights. 2. Turn twice to the position for the rear fog lights. 3. This simultaneously turns on both front and rear fog lights; reverse the process to turn them off. 4. After turning on the parking lights, you can then activate the fog lights. Additional information: 1. Fog lights are a special type of lighting. The fog light bulb is made with a special flash head, with reflective glass in front of the flash tube, and all the light output is diffused light reflected by the reflector. 2. Because visibility is low in foggy conditions, the driver's line of sight is limited. The lights can increase the visible distance, especially the strong penetration of yellow fog lights, which improves visibility for the driver and other traffic participants, allowing approaching vehicles and pedestrians to spot each other from a greater distance. When driving at night in the city without fog, do not use the fog lights. The front fog lights lack a glare shield, which can make the vehicle lights dazzling and affect driving safety.
How to turn on the fog lights in an 18th-gen Corolla? I was quite confused when I first encountered this situation, but I figured it out after some exploration. The operation is quite simple. Once you're seated in the driver's seat, first turn the key to the ACC position or start the engine. Then, look at the light control stalk on the left side of the steering wheel. That stalk has two rotary sections: the upper part is usually the headlight switch—first turn it to the headlight position (typically the first notch is for parking lights, and the second is for headlights) to ensure the lights are on. Next, on the lower part of the stalk or the side of the stalk itself, there might be a pull-out ring. Gently pull it out once to activate the front fog lights; sometimes, pulling it twice activates the rear fog lights. The Corolla's design is very intuitive, and you'll get used to it after a few uses. Remember, fog lights should only be used in rainy or foggy conditions to improve visibility—don’t use them on clear days as it can affect others' safety. If you still can’t find it, I recommend checking the owner’s manual, as it has illustrated instructions.
I don't think it's difficult to turn on the fog lights of the 2018 Corolla. The steps are clear and straightforward. You sit in the driver's seat, the car needs to be started or powered on, and then the turn signal lever is on the left side of the steering wheel. Turn the top part of the lever to the headlight position (the lights will come on), then pull out a small section at the bottom of the lever—that's actually the fog light switch. Pull it once to turn on the front fog lights, and a green indicator will appear on the dashboard; pull it a second time to turn on the rear fog lights. The Corolla's design is very user-friendly, and you won't forget it after a few tries. Also, it's worth mentioning that fog lights are positioned low to penetrate fog and reduce the risk of accidents, but they should only be used in low visibility conditions. For new cars, the battery should be in good condition to avoid startup issues that might cause the operation to fail. If the button gets stuck or the fog lights don't turn on, it might be a blown fuse, and it's time to check and maintain it.
