How to Turn on the Fog Lights of Toyota Vios?

1 Answers
Easton
07/29/25 10:11pm
Toyota Vios fog light activation steps are as follows: 1. Adjust the FAW Toyota Vios fog light knob to the middle position to turn on the front fog lights. 2. Adjust to the top position to turn on both front and rear fog lights. 3. Adjust to the "O" position to turn off the fog lights. Introduction to light usage is as follows: 1. In heavy rain with obstructed visibility, it is best to turn on the hazard warning lights, commonly known as "double flashing." The yellow light has better penetration in heavy rain, fog, and other weather conditions with obstructed visibility, making it easier for vehicles in front and behind to identify. Fog lights generally refer to automotive fog lights. Automotive fog lights are installed at the front and rear of the vehicle to illuminate the road and provide safety warnings during rainy and foggy weather, improving visibility for the driver and surrounding traffic participants. 2. The symbol for front fog lights is: three diagonal lines on the left, crossed by a curved line, and a semi-elliptical shape on the right. The symbol for rear fog lights is: a semi-elliptical shape on the left and three horizontal lines on the right, crossed by a curved line. 3. Fog lights can only be installed below the bumper, at the position closest to the ground, to ensure their effectiveness. If installed too high, the light cannot penetrate the rain and fog to illuminate the ground (fog is generally thinner below 1 meter), which can easily cause danger.
Was this review help?
19
3
Share
More Forum Discussions

Where is the engine number located on the Wuling Zhiguang?

The engine number of the Wuling Zhiguang is located on the left side of the engine cylinder block. It generally consists of a combination of 7 to 8 digits and English letters. In addition to the above method, the engine number can also be checked through the following four ways: The vehicle's driving license has the engine number printed on it, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and the engine model can be the same. The engine number, however, refers to the production number of the engine. Each engine can only use one engine number, and the number of each engine is unique.
20
1
Share

Why does the car shake a little when starting?

The degree of shaking during car startup has become an important indicator to measure the level of a car. If you notice severe shaking, it indicates an abnormal condition in the vehicle, and you should stop and inspect it promptly to avoid more serious dangers. Below are the reasons for car startup shaking: 1. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. This makes starting difficult, and it becomes easier only after the carbon deposits have absorbed enough gasoline to reach saturation. 2. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction force for combustion, enriching the air-fuel mixture. The engine's combustible mixture alternates between lean and rich, causing idle shaking after a cold start. Solution: Clean the fuel system and check if the idle air control valve has carbon buildup; it should be thoroughly cleaned.
7
3
Share

What to Do When the Transmission Fails?

Transmission oil temperature should not exceed 120 degrees, with 80 or 90 degrees being optimal. Prolonged exposure to temperatures higher than this can accelerate the degradation of the transmission oil's composition and usability. When the oil temperature reaches 143 degrees, the transmission oil is likely to lose its lubricating properties, which can cause internal transmission components to fail due to excessive friction and overheating. Below is additional information about transmissions: 1. As one of the "three major components" in a vehicle, the quality of the transmission directly affects the car's handling and safety. If the transmission fails, it can easily lead to traffic accidents. Many transmission failures are caused by high temperatures and overheating, requiring immediate cooling. 2. According to data analysis, over 90% of automatic transmission failures are due to high temperatures and overheating. Excessive transmission oil temperature can lead to a series of transmission problems, and in severe cases, it can cause transmission damage or even traffic accidents.
7
1
Share

What are the differences between the Haval Chitu and First Love?

Haval First Love and Chitu are very close in size, with identical wheelbases. The difference in dimensions between the two models mainly lies in the body width, which is primarily due to the kit and does not affect the overall class and interior space. Below are the differences between Haval First Love and Chitu: 1. In terms of body dimensions, the Haval Chitu measures 4470/1898/1625mm in length, width, and height, with a wheelbase of 2700mm. Its dimensions are roughly equivalent to the Haval First Love, positioning it as an entry-level compact SUV. The First Love measures 4472/1841/1619mm in length, width, and height, with a wheelbase of 2700mm, positioning it as a compact SUV. 2. In terms of power, the Haval Chitu is equipped with a 1.5T engine, available in high and low power tuning versions, with maximum power outputs of 184 horsepower and 150 horsepower respectively. It is paired with a 7-speed wet dual-clutch transmission. The Haval First Love is equipped with a 1.5T engine, delivering a maximum output power of 110kW (150 horsepower). It is paired with a 7-speed dual-clutch transmission.
5
2
Share

What does the Volkswagen EPC display indicate as a fault?

Volkswagen EPC display indicates an electronic throttle fault. The reasons for the EPC display are as follows: 1. Dirty throttle body with excessive carbon deposits. 2. Intake system failure, such as leaks or blockages. 3. Use of substandard fuel. Solutions are as follows: 1. Clean carbon deposits from relevant parts. 2. Use qualified fuel and clean the throttle body. Related information is as follows: 1. The dimensions of the Volkswagen Polo are 4053mm in length, 1740mm in width, and 1449mm in height, with a wheelbase of 2564mm. It is equipped with a 5-speed manual transmission and has a top speed of 190 km/h. 2. The fuel tank capacity of the Volkswagen Polo is 42.5L, with a maximum horsepower of 113 hp, and the tire specification is 185/65R15.
1
5
Share

What does OBD on a car mean?

OBD on a car stands for On-Board Diagnostics, a system that continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. When a fault occurs in the system, the malfunction indicator lamp or check engine warning light will illuminate, and the powertrain control module will store the fault information in memory. Through a specific procedure, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly identify the nature and location of the fault. OBD monitors systems and components such as the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, etc., in real-time.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.