How to Turn on the Fog Lights of Tiggo 3?
2 Answers
The fog light switch of Tiggo 3 is located on the left stalk near the steering wheel. Press the switch to turn them on. Below is some relevant information about fog lights: 1. Fog lights help other vehicles see your car in conditions of reduced visibility, such as fog or heavy rain, so the light source needs to have strong penetration. 2. Most vehicles use halogen fog lights, with LED fog lights being a more advanced option. The steps to remove fog lights are as follows: 1. Use a flat-head screwdriver to gently pry the fog light grille from the back, releasing the clips inside. Once the front gap is widened, carefully pry the clips securing the grille to the front bumper. Remove the grille slowly to avoid breaking the plastic clips. 2. The fog lights are fixed to the front bumper with two screws. Use a Torx wrench to remove these screws and keep them safe for reinstallation. 3. After removing the screws, the fog light is held in place by two tabs inserted into the bumper's holes. Gently pull upward from the side where the screws were removed to detach the fog light.
When driving the Tiggo 3, I noticed that the fog light switch is designed on the left-hand side of the steering wheel, on the light control stalk. It's quite intuitive to operate: first start the vehicle's engine, then gently rotate the control stalk to the headlight position, which is usually marked with a headlight symbol. Next, continue pulling the end part of the stalk outward or downward, and the fog lights will automatically turn on. Remember, fog lights are mainly used in poor visibility conditions like foggy or rainy weather, as they enhance the vehicle's visibility and help prevent accidents. If heavy fog rolls in, I turn them on immediately so other drivers can spot me early and avoid rear-end collisions. Sometimes, depending on the vehicle's settings, fog lights may be divided into front and rear sections. Generally, turning on the front fog lights is sufficient, while the rear fog lights are needed in more severe weather conditions. Never use them on clear days, as the bright lights can dazzle other drivers, and you might even get fined for violating regulations. Having driven for several years, I've learned that these small details can significantly improve safety.
