How to Turn on the Fog Lights of the Tiguan?

2 Answers
Zion
07/24/25 8:30am
Tiguan's fog light switch is located on the lighting assembly to the left of the steering wheel. You can turn the fog lights on or off by rotating the switch. The front fog lights of the Tiguan feature an integrated design of the lamp cover and housing, meaning the cover cannot be replaced separately—only the entire fog light assembly can be replaced. If you need to replace the fog light cover, follow these steps to remove the fog light: 1. Use a flat-head screwdriver to pry from the back of the fog light grille, releasing the clips inside. Then, use the screwdriver to pry the clips securing the grille to the front bumper from the front gap. Once all clips are released, remove the fog light grille. 2. Remove the two screws fixing the fog light in place. 3. After removing the screws, the fog light is secured by two tabs inserted into the bumper's clip holes. Hold the area where the screws were removed and gently pull upwards to detach the front fog light.
Was this review help?
12
5
Share
SanMatthew
08/11/25 4:06am
I've been driving my Tiguan for several years, and the steps to turn on the fog lights are pretty straightforward. First, you need to turn on the headlights; otherwise, the fog light option will be grayed out. Then, look at the control stalk on the left side of the steering wheel—there's a ring-shaped switch on its inner side with a small fog light icon. Rotating it clockwise activates the front fog lights, and another turn might bring up the rear fog light option. In rainy or foggy conditions, it significantly improves visibility, but avoid using it unnecessarily on clear nights to prevent blinding others. If you're unsure about the icon's location, check the owner's manual—some newer Tiguan models have electronic buttons on the dashboard. I recommend checking the lights during every service to prevent unexpected failures. Remember, proper use of fog lights is a responsibility for your safety and others', and some local regulations require them to be on during severe weather.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

Motorcycle Tire Lifespan?

Under the premise of maintaining proper tire pressure, the lifespan of a standard motorcycle rear tire typically ranges from 2 to 3 years, while the front tire lasts between 4 to 6 years. Below is an introduction to factors influencing motorcycle tire lifespan: 1. Road Conditions: Generally, gravel roads cause the most tire wear, followed by concrete roads, with asphalt roads and mountain dirt roads being less abrasive. This is primarily related to road surface hardness—asphalt and dirt roads offer better flexibility, resulting in comparatively less tire wear. Tire lifespan is closely tied to road conditions, tire quality, and driving habits, so it cannot be generalized and must be assessed case by case. 2. Tire Quality: Beyond tread design, the proportion of natural rubber is crucial. High-quality tires usually contain a higher percentage of natural rubber, which enhances durability due to its flexibility. Additionally, tread pattern directly affects wear resistance—smaller tread patterns generally last longer, while larger ones wear out faster. 3. Driving Habits: Gentle acceleration, smooth starts, and gradual braking can extend tire life. Conversely, aggressive starts and frequent hard braking accelerate tread wear.
2
0
Share

How many liters of transmission oil does the Kia K5 require?

Kia K5 requires 4 liters of transmission oil. The relevant details about the Kia K5 are as follows: Transmission: The Kia K5 transmission is supplied by Hyundai Mobis from South Korea. The Mobis transmission is essentially an improved version based on the previous Mitsubishi transmission. In terms of the powertrain, the 2019 Kia K5 is equipped with a 2.0L naturally aspirated engine and a 1.6T turbocharged engine, with maximum power outputs of 118kW (161PS) and 132kW (180PS) respectively, and peak torques of 193N.m and 265N.m. Front Design: It adopts a very stylish "Tiger Nose" design concept. The recessed grille, treated with chrome trim, greatly enhances the overall premium feel of the vehicle. The richly detailed headlight assemblies on both sides and the trapezoidal lower area of the bumper all exude a strong sporty vibe.
5
4
Share

What to Do When an Earthquake Occurs While Driving a Car?

Slow down and brake smoothly as soon as possible, park the car in an open area, and turn on the hazard lights. Resume driving only when it is safe. Below are some solutions for dealing with an earthquake while driving: 1. Avoid tunnels and dams: During an earthquake, drivers must remember not to enter tunnels or dams. If already inside a tunnel, exit as quickly as possible. In case of collapse or other dangers, stop the vehicle immediately and seek refuge on a safe, open road. 2. Choose the right shelter location: If an earthquake occurs while driving, the best option is to take cover between two vehicles, crouch down, and protect your head. The space between two cars can serve as a life-saving area, increasing the chances of survival. Do not stay inside the car, as you could be crushed to death. The space between two vehicles is a relatively safe refuge. 3. Find an open area: When encountering an earthquake while driving, besides seeking an open space for refuge, crowded areas can also be good places to escape. In crowded areas, the chances of self-rescue and mutual rescue are significantly higher.
20
0
Share

What is the fuel consumption of the Raeton?

The official comprehensive fuel consumption of the Raeton is 7.6L/100km. The actual fuel consumption is related to driving habits, skills, road conditions, climate, etc., with a fluctuation of about 10%. Below is some relevant information about the Raeton: 1. Exterior: The Raeton CC features a youthful and sporty overall design, with characteristics reminiscent of a coupe. The butterfly-wing front grille is part of Changan's new family style, and the smooth lines make the Raeton CC appear more agile and dynamic. This exterior design exceeds expectations for vehicles in this price range, giving it a more luxurious and grand appearance, thus leaving a deep impression and visual impact. 2. Interior: The Raeton CC's interior adopts a symmetrical center console layout, with a dual-tone color scheme accented by silver trim, giving it a high-quality look. The center console is equipped with a floating LCD display. In terms of features, the Raeton CC offers different configurations depending on the model, including a full LCD instrument panel, electric driver's seat adjustment, one-button start, collision warning, panoramic imaging, and front seat ventilation/heating.
18
3
Share

What methods can be used to solve the problem of noisy wipers?

Stop the wiper in the middle position (pull the wiper control lever toward the steering wheel after the engine is turned off), then gently lift it up. Wrap the steel frame with a cloth or soft material, use a wrench or pliers to grip the wrapped part, and twist it downward a few times. After resetting, test the wiper. If the noise decreases, repeat the process until the abnormal noise is eliminated. Here are some details about noisy wipers: 1. Cause: The root cause of wiper noise is improper installation of the wiper blade support frame (not parallel to the windshield). Observe whether the noise occurs during the upward or downward motion of the blade. 2. Precautions: Be careful and patient during the operation. Avoid using excessive force. If the noise occurs during the downward motion, it means the wiper frame is twisted downward. Stop the wiper in the middle position, lift it up, wrap the steel frame with a cloth or soft material, and use a wrench or pliers to twist the wrapped part upward a few times until the noise is eliminated. If a single wiper blade makes noise during both upward and downward motions, replace the blade.
14
5
Share

What to Do If No Deduction After Passing Highway ETC?

There are two scenarios when highway ETC fails to deduct fees: One is due to damaged barriers where vehicles pass through the ETC lane too quickly, causing deduction failure; the other is that ETC adopts deferred billing, meaning deductions won't occur immediately but within a certain billing cycle. ETC Usage Notes: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, maintain a distance of over 10 meters to prevent accidental fee payments for the preceding vehicle in case its ETC device malfunctions or is absent. The ETC lane recognition speed limit is 20km/h. Excessive speed will prevent reading vehicle device information, leading to deduction failure. Unauthorized removal/relocation of OBU devices, detached or loose ETC electronic tags will deactivate the tag. Visit your ETC card-issuing bank or highway service center for inspection. Non-intentional loosening/reactivation only requires reactivation. Insufficient balance on debit cards linked to ETC also causes deduction failure. Follow staff guidance to use manual MTC lanes with cash/card payments. Overly thick windshields may cause poor signal reception, especially for post-accident/replaced windshields or modified front windshield vehicles.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.