How to Turn on the Fog Lights of the Tayron?
2 Answers
The method to turn on the fog lights of the Tayron: First, rotate the knob to the position of the parking lights, then pull it out once to turn on the front fog lights, and pull it out again to turn on both the front and rear fog lights. Rotate the knob back to the off position to turn off the fog lights. Fog lights are installed at the front and rear of the car. The light from fog lights has strong penetration, which can improve the visibility of the driver and surrounding traffic participants, allowing oncoming vehicles and pedestrians to notice each other from a greater distance. The Tayron is a German premium mid-size SUV launched by FAW-Volkswagen, with a body length, width, and height of 4595mm, 1860mm, and 1660mm respectively, a wheelbase of 2731mm, equipped with the EA888 2.0T turbocharged engine, and introduced the DQ500 seven-speed wet dual-clutch transmission.
As a Tayron owner for over two years, I've encountered foggy conditions multiple times. Activating the fog lights is straightforward: First, start the engine or turn the key to the ON position to ensure the car is powered. The light control lever is on the left side of the steering wheel. Rotate it to the manual lighting mode, such as turning it until the low beam lights up. Then gently pull the lever forward: the first pull to the detent with a click sound activates the front fog lights, and an icon with a wavy symbol lights up on the instrument panel; another pull or pulling it all the way activates the rear fog lights, and the icon changes to an inverted arrow with waves. If the lights turn on, you've succeeded. In heavy fog or heavy rain, turning on the front fog lights can illuminate the lower part of the road ahead, reducing glare that interferes with visibility, while the rear fog lights help following vehicles see your position. However, avoid turning them on unnecessarily in clear weather—especially the rear fog lights, as they can dazzle drivers behind you. Remember to turn them off once the fog clears. If the lights don't turn on, first check if the fuse or switch is properly connected. The Tayron's fog light switch is quite reliable and usually works fine. Safety first!