How to Turn on the Fog Lights of the Buick Encore?

3 Answers
OChase
07/25/25 7:18am
To turn on the fog lights of the Buick Encore, press the button on the top of the light control lever. The Buick Encore is equipped with a 1.0T inline 3-cylinder turbocharged engine, delivering a maximum horsepower of 125 PS, a maximum torque of 180 Nm, and a maximum power output of 92 kW. The maximum power speed ranges from 4,000 to 5,800 rpm, while the maximum torque speed ranges from 1,350 to 4,500 rpm. It is paired with a 6-speed automatic transmission. The Buick Encore measures 6,295 mm in length, 1,798 mm in width, and 1,607 mm in height, with a wheelbase of 2,507 mm. It has a minimum ground clearance of 158 mm and a curb weight of 1,245 kg.
Was this review help?
14
0
Share
LaLilah
08/11/25 1:24pm
I've been driving a Buick Encore recently, and turning on the fog lights is quite simple. First, make sure your low beam headlights are on, because fog lights are an additional feature and won't work without the low beams as a base. Then, on the light control stalk to the left of the steering wheel or on the dashboard, find a button or knob labeled "FOG" or with a small fog light icon. Just twist or press it, and a yellow indicator on the dashboard will light up to confirm the fog lights are on. I always turn them on when driving in foggy conditions—the lights are designed to scatter, helping to illuminate a wider area of the road in thick fog. However, avoid using them in clear or bright weather, as they can dazzle oncoming drivers and be annoying. It also saves electricity this way. Additionally, I regularly check if the lens is dirty or the bulb is burnt out. Cleaning it with a damp cloth helps maintain brightness—safety comes first, after all. Paying attention to these small details in daily driving can prevent a lot of trouble. Like last time, using fog lights in the rain significantly improved visibility.
Was this review help?
15
3
Share
Expand All
DelBarrett
09/27/25 6:05am
As a Buick Encore owner, I find turning on the fog lights quite straightforward: After sitting in the driver's seat, ensure the low beams are on—this is usually controlled by the light switch. Then, locate the control area near the steering wheel where there's a dedicated fog light knob or lever. Turn it clockwise or give it a gentle pull, and if the light comes on, you're set. I figured this out when learning to drive—the key is to check the manual to confirm the position, as it varies slightly between models. Using fog lights in foggy conditions improves visibility and reduces accidents. Remember to turn them off after use to avoid draining the battery, as fog light bulbs have a limited lifespan. Replacing them isn't expensive, and my personal advice is to only use them in rain, snow, or fog. If you encounter issues, don't force it—check if the bulb or fuse is faulty. Making these small steps a habit ensures peace of mind.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What is the best engine oil for Roewe RX5?

Roewe RX5 is best suited for 5W-30 fully synthetic engine oil. Here are some extended details: 1. Introduction to engine oil: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³(kg/m³). It serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of a car. 2. Extended information: The engine is the heart of a car, containing many metal surfaces that move against each other in friction. These components operate at high speeds under harsh conditions, with working temperatures reaching 400°C to 600°C. In such extreme operating conditions, only qualified lubricating oil can reduce wear on engine parts and extend their service life. Engine oils on the market can be broadly categorized into mineral oils and synthetic oils based on their base oil (vegetable oils are not considered due to their scarcity).
13
2
Share

What kind of people drive the BMW 5 Series?

BMW 5 Series owners in China are predominantly from the post-80s generation. The model's design updates have increasingly leaned towards a younger aesthetic, leading to a downward shift in the age demographic of its consumer base. Below are additional details: 1. Powertrain: The BMW 5 Series is equipped with a 2.0-liter turbocharged engine and a 3.0-liter turbocharged engine. The low-power version of the 2.0-liter turbocharged engine delivers a maximum horsepower of 184 hp, while the high-power version reaches 252 hp. The 3.0-liter turbocharged engine produces a maximum horsepower of 340 hp. 2. Suspension: The BMW 5 Series features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
2
2
Share

Does Using 95 Octane Gasoline in a Car Rated for 92 Octane Have Any Impact?

Using 95 octane gasoline in a car rated for 92 octane has the following impacts: 1. It can damage the engine, spark plugs, and the vehicle's ignition system; 2. It may shorten the engine's lifespan. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from the distillation, cracking, or pyrolysis of petroleum, used as fuel. It is classified by its octane rating into 89, 90, 92, 93, and 95 octane. The reasons for a gasoline smell inside the car include: 1. Overfilling the gas tank; 2. Leakage in the fuel pump; 3. Aging of rubber gasoline lines; 4. Incomplete combustion during cold starts; 5. Residuals not cleaned during fuel pump replacement; 6. Aging or uneven gasket in the fuel tank cap; 7. Dirty fuel injectors and throttle body.
19
3
Share

Is the Volkswagen Tharu from SAIC Volkswagen or FAW-Volkswagen?

Tharu belongs to SAIC Volkswagen, with specific details as follows: 1. Models under its lineup: 2021 2WD Fashion Edition, 2021 2WD Comfort Edition, 2021 2WD Luxury Edition, 2021 2WD Luxury Edition Plus, 2020 2WD Fashion Edition, etc. 2. Vehicle Specifications: The Tharu is built on Volkswagen's MQB A1 modular platform, with dimensions of 4453×1841×1632mm and a wheelbase of 2680/2688mm (2680mm for 1.4T/2.0T models and 2688mm for the 1.2T model). 3. Powertrain: The Tharu is equipped with 1.4T and 2.0T turbocharged engines, delivering maximum power outputs of 110kW and 137kW respectively, with peak torques of 175Nm, 250Nm, and 320Nm.
4
2
Share

What does the SVS indicator light on the car dashboard mean?

Car dashboard indicator light SVS refers to the engine fault indicator light. When the vehicle's ignition key is turned on, the light illuminates and will turn off after the vehicle is started. If the engine ECU detects a fault, the SVS light will illuminate. If the light comes on while the vehicle is in motion, it indicates that there is a fault with the vehicle's engine. The SVS light is a standard indicator in the automotive industry, responsible for warning of abnormalities in the powertrain system and prompting users to take the vehicle to a service shop for inspection and repair. Its alarm originates from the engine, transmission, and gear shift control mechanism. All fuel-injected vehicles have an SVS fault indicator light; for manual transmissions, it serves as the engine fault indicator light, while for automatic transmissions, it serves as the engine and automatic transmission fault indicator light.
16
5
Share

Can the EA211 Timing Belt Last for 300,000 Kilometers?

Can the EA211 timing belt last for 300,000 kilometers? The official replacement mileage for the EA211 timing belt is indeed 300,000 kilometers. However, the official maintenance manual specifies that the belt should be serviced when the vehicle reaches 90,000 kilometers, followed by inspections every 30,000 kilometers thereafter. If any abnormalities are detected, replacement is necessary. Precautions for Timing Belt Replacement: When replacing the timing belt, ensure that the operator follows the correct procedures. Do not bend the timing belt forcefully, as this can cause severe internal fiber fractures in the belt's cross-section, significantly reducing its lifespan. During installation, the tensioner pulley must be adjusted properly—avoid using a wrench or hard objects to pry the belt into place. When to Replace the Timing Belt: If you notice cracks on the surface of the timing belt, a strong rubber odor, or unusual noises while driving, it may indicate aging or improper installation. Additionally, check whether the belt's quality and tooth profile meet standards and match the generator's timing pulley. In such cases, replacing the timing belt should be considered.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.