How to turn on the fog lights of Chevrolet Malibu XL?

2 Answers
SanEvelyn
07/24/25 2:45pm
To turn on the fog lights of Chevrolet Malibu XL, simply press the fog light button next to the light control knob. The front fog light symbol features three diagonal lines on the left crossed by a curved line, with a semi-oval shape on the right; the rear fog light symbol has a semi-oval shape on the left and three horizontal lines on the right crossed by a curved line. Before operating the lights, ensure the vehicle is in the ignition state. The Chevrolet Malibu XL is a business sedan under the Chevrolet brand, equipped with the eighth-generation Ecotec 2.0T intelligent variable-cylinder turbo engine and a 9-speed HYDRAMATIC automatic manual transmission. All models fully comply with the China VI emission standards, delivering a more intelligent, energy-efficient, and environmentally friendly driving experience for mid-to-high-end sedans.
Was this review help?
5
3
Share
JuniperLynn
08/11/25 8:27am
I must say the fog light operation on the Malibu XL is actually quite simple, but it depends on the year and trim. Typically, you'll find the fog light symbol - an icon of a semicircle with three wavy lines - on the left-hand stalk behind the steering wheel. First turn on the parking lights or low beams, then rotate the fog light ring in the middle of the stalk: one click forward for front fog lights, two clicks for rear fog lights. The instrument cluster will display a green front fog light icon or an amber rear fog light indicator. Note that some newer models have simplified the front fog lights, replacing them with daytime running lights. Rear fog lights are mandatory by regulations and can be lifesavers in heavy rain or dense fog, but remember to turn them off when conditions improve - they're extremely bright and can dazzle drivers behind you. If you can't locate the stalk control, try looking for a standalone button with the fog light symbol on the left side of the dashboard after starting the vehicle.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How often should car antifreeze be replaced?

Car antifreeze generally needs to be replaced every two years or every 40,000 kilometers. Since the driving conditions of each vehicle vary, the specific replacement interval can be determined based on actual usage. During routine car maintenance, it is essential to regularly check the antifreeze to see if the level has decreased or if it has deteriorated. The full name of antifreeze is antifreeze coolant, meaning it is a coolant with antifreeze properties. Antifreeze prevents the coolant from freezing and causing damage to the radiator or engine block during cold winter parking. Antifreeze is a type of coolant that contains special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year.
11
5
Share

What brand is goodride tires?

goodride is Goodride tires. Goodride tires were born in 1997 and belong to Hangzhou Zhongce Rubber Co., Ltd., one of China's larger tire manufacturers. Goodride tires adopt internationally advanced production technology and top-tier tire manufacturing and testing equipment. They have not only obtained China's mandatory certification for the tire industry but also passed the U.S. Environmental Protection Agency's Smartway certification for green and environmentally friendly tires. goodride offers a variety of tire types, including car tires specifically developed for car users. Among them, the SA37 tire, designed for mid-to-high-end cars with excellent sports handling performance, has reached the level of mainstream European products.
13
4
Share

How to Connect Bluetooth to Play Music in a Mercedes-Benz?

To connect Bluetooth for playing music in a Mercedes-Benz, follow these steps: 1. Turn on your phone's Bluetooth and set it to be visible or discoverable to all. Then, through the vehicle's central display, select Entertainment or Multimedia, and choose the Bluetooth device; 2. After the car's Bluetooth is activated, use your phone to find the car's Bluetooth signal and pair them. The default password is usually 0000 or 1234. Once paired successfully, you can play music normally. Mercedes-Benz is a German automobile brand renowned for luxury and high performance, headquartered in Stuttgart, Germany. Mercedes-Benz models include the A-Class, B-Class, C-Class, CL-Class, CLK-Class, CLS-Class, E-Class, and S-Class.
12
1
Share

What does the exclamation mark in a car mean?

There are three situations regarding the exclamation mark in a car: 1. An exclamation mark inside a triangle indicates a general fault warning light; 2. An exclamation mark inside a circle with brackets is the brake system warning light, which illuminates when the parking brake handle is pulled up and turns off automatically when the handbrake is released; 3. An exclamation mark with a horizontal line below brackets is the tire pressure monitoring warning light, which lights up when the tire pressure is insufficient. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Standard gauges include the speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge.
12
1
Share

What Causes the Zizzing Sound When Driving?

The reason for the zizzing sound when driving is: the brake pads have worn to their limit, causing the brake drum to come into direct contact with the vehicle. Under normal driving conditions, the front brake pads need to be replaced every 30,000 to 50,000 kilometers, while the rear brake pads can last for about 60,000 to 100,000 kilometers before needing replacement. The wear level varies depending on the driving conditions of each car. You can determine whether replacement is needed by checking the thickness of the brake pads. Typically, new brake pads are about 1.5 centimeters thick. There is a protrusion on both ends of the brake pad, approximately 3 millimeters in height. If the thickness of the brake pad is level with this indicator, it should be replaced immediately.
17
4
Share

What is the fault when the Audi EPC light is on?

The EPC indicator light has two states of illumination: self-check upon power-on and illumination under other circumstances. The self-check upon power-on is an indication that the vehicle monitors the status of all sensors before driving. Generally, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on or does not turn off for a long time after the vehicle is started, the main reasons for the EPC light staying on include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed introduction to the causes of the EPC light being on under other circumstances: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, causing the light to illuminate. Fuel system fault: For example, substandard fuel, deteriorated fuel, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with the intake valves and other power system components can also trigger the EPC light. ECU control unit fault: Such as interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: If the brake lights do not illuminate, the brake switch malfunctions, or there are issues with the brake wiring. Solutions for when the EPC light illuminates: Troubleshoot the intake system, use fuel with the appropriate octane rating, clean the throttle body, etc. Remove carbon buildup from relevant parts. Re-flash the ECU data. If the EPC light illuminates, the owner can first try turning off the engine and restarting it to see if the EPC light remains on. If it does not illuminate again, there may be no issue, possibly just interference affecting the EPC light. If the EPC light remains on or frequently illuminates, the vehicle should be taken to the nearest service point for professional diagnosis and repair to promptly eliminate safety hazards. When the engine operates unstably, check the following: Inspect the spark plugs and cylinder wires. Test the fuel pressure system. Check the fuel injectors for each cylinder. Inspect the fuel pump and its circuit. Check cylinder pressure, intake and exhaust valve clearance, fuel vapor control solenoid valve, EGR valve operation, and intake manifold leaks, etc. There are many reasons for unstable engine operation. Therefore, after an issue arises, it is essential to visit a service center for systematic checks to accurately identify the fault and determine the solution. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined measures for the powertrain. Common EPC indicator lights generally display two colors: yellow and red. If the EPC fault light is yellow and the vehicle can still operate normally, proceed slowly to a service point for inspection. If the EPC fault light is red, the situation is more severe, and the vehicle should be pulled over immediately to contact a professional for repair. Continuing to drive may directly affect the vehicle's core components or driving safety.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.