How to turn on the fog lights of a Polo car?

1 Answers
LeJoy
07/30/25 3:48am
The method to turn on the fog lights of a Polo car: With the position lights on, pull the light switch outward. Pulling it one notch turns on the front fog lights, and pulling it two notches turns on both the front and rear fog lights. Fog lights are specifically used in foggy conditions. When visibility is severely reduced due to heavy fog, it is essential to turn on these lights to ensure your vehicle is visible to others. The Polo is a model under Shanghai Volkswagen, with body dimensions of 3970mm in length, 1682mm in width, and 1462mm in height, and a wheelbase of 2470mm. In terms of appearance, the Polo is dynamic and stylish, especially its headlights, with LED side turn signals being a relatively mainstream configuration. The Polo offers handling performance that surpasses other models in its class, maintaining excellent stability and maneuverability whether at high speeds on the highway or at low speeds in urban areas.
Was this review help?
18
2
Share
More Forum Discussions

What is the method to adjust the time on the Besturn B50 CD player?

The method to adjust the time on the Besturn B50 CD player is: 1. Turn on the audio switch, press and hold the 'clock' button below the CD for 3 seconds to adjust the hour; 2. Press and hold the 'clock' button again for 3 seconds to adjust the minute; 3. After adjustment, press the 'clock' button to confirm. The Besturn B50 is a compact car with the following dimensions: length 4695mm, width 1795mm, height 1460mm, wheelbase 2725mm, front and rear track 1560mm, minimum ground clearance 140mm, fuel tank capacity 58 liters, trunk capacity 435 liters, and curb weight 1432kg.
20
5
Share

When Should Car Brake Pads Be Replaced?

Car brake pads need to be replaced after driving 80,000 kilometers. The method for replacing brake pads is as follows: 1. Remove the wheel where the brake is located; 2. Remove the bolts of the brake caliper and take out the brake pads; 3. Install new brake pads, tighten the guide bolts, and complete the replacement. The working principle of car brake pads is to convert the kinetic energy of the vehicle into heat energy through friction between the brake pads and the brake drum, as well as between the tires and the ground, thereby stopping the car. The maintenance methods for car brake pads include: 1. Avoid sudden braking; 2. Reduce the frequency of braking; 3. Regularly perform wheel alignment; 4. Pay attention to the break-in period after replacing brake pads.
2
3
Share

What are Hyundai's premium models?

Hyundai's premium models include: Equus, Genesis, Genesis Coupe, Veracruz, Azera, etc. Taking the 2012 Genesis Coupe as an example, it is a 2-door, 4-seater hardtop coupe with body dimensions of: length 4630mm, width 1865mm, height 1385mm, wheelbase of 2820mm, fuel tank capacity of 65 liters, and trunk capacity of 332 liters. The 2012 Genesis Coupe is equipped with a 2.0T turbocharged engine, producing a maximum horsepower of 260 PS, maximum power of 191 kW, maximum torque of 353 Nm, and is paired with a 6-speed manual transmission.
17
3
Share

What is the method for tuning car audio?

Car audio tuning methods are: 1. Set the filter in the car audio to high-pass mode; 2. Adjust the cutoff frequency on the head unit to approximately 60-100Hz; 3. If the audio produces impurities or lacks clarity, adjust the cutoff frequency back and forth. Car audio system button indicators: 1. PWR is the power button, press and hold this button for more than 1 second to turn off; 2. MUT is for muting the playback; 3. AMS is for radio mode, press and hold this button for more than 2 seconds to automatically save the received station to presets 1-6. Briefly press this button to cycle through presets 1-6, staying on each for 5 seconds. In MP3 mode, pressing this button selects the MP3 menu.
5
1
Share

What does the wrench symbol on the dashboard indicate?

The wrench symbol on the dashboard is a reminder for the vehicle owner that maintenance is required. The method to reset the wrench indicator is as follows: 1. Insert the key; 2. Turn the key to the 'on' position, and with the engine idling, press and hold the odometer button on the dashboard for more than 15 seconds without releasing; 3. Simultaneously press the brake and accelerator pedals, waiting for the maintenance light to flash; 4. Release both the brake and accelerator pedals. Vehicle maintenance tasks include: 1. Changing the engine oil and oil filter; 2. Regularly cleaning the air filter; 3. Replacing brake fluid, transmission fluid, battery, throttle body, fuel injectors, and brake pads.
14
2
Share

Where is the Magotan fuel filter located?

The Magotan fuel filter is located under the fuel tank in the vehicle's undercarriage. The function of the fuel filter is to remove impurities from the gasoline. Taking the 2020 Magotan as an example, it is a mid-size sedan equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum torque of 250 Nm, and a maximum power of 110 kW. It is paired with a 7-speed dual-clutch transmission. The 2020 Magotan has a body length of 4865 mm, width of 1832 mm, height of 1471 mm, a wheelbase of 2871 mm, a fuel tank capacity of 66 liters, a trunk capacity of 533 liters, and a curb weight of 1445 kg.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.