How to Turn on the Fog Lights of a Passat?

1 Answers
JasonDella
07/30/25 5:09am
The method to turn on the fog lights of a Passat is: turn on the running lights or headlights, locate the fog light switch, and then activate it. Taking the Passat 2020 Modified 280TSI Business Edition National VI as an example, its body dimensions are: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 68.5 liters, and trunk capacity 521 liters. The Passat 2020 Modified 280TSI Business Edition National VI is equipped with a 1.4T 150-horsepower L4 turbocharged engine, with a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
12
1
Share
More Forum Discussions

What types of insurance should I purchase for my car?

Generally, it is recommended to purchase comprehensive car insurance, which consists of basic insurance and additional coverage. This includes compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, no-deductible insurance, passenger liability insurance, spontaneous combustion insurance, water damage insurance, scratch insurance, standalone glass breakage insurance, and theft insurance. Below is an introduction to the coverage of each type of insurance: 1. Theft Insurance: Covers damage to the car during robbery or theft, including losses due to the entire vehicle being stolen, robbed, or seized, as well as damage or loss of vehicle parts and accessories. 2. Passenger Liability Insurance: Provides coverage for passengers in the vehicle, excluding the driver. 3. Water Damage Insurance: Covers losses caused by engine damage due to immersion in water. 4. Spontaneous Combustion Insurance: Covers losses caused by fire due to the vehicle's electrical system, wiring, fuel supply system, or gas supply system without external ignition sources. 5. Standalone Glass Breakage Insurance: Covers the standalone breakage of glass. 6. Scratch Insurance: Covers losses caused by intentional scratching of the vehicle.
10
2
Share

What is the battery model for the Audi Q2L key?

The battery model is CR2032. It is a lithium-manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the shape of the battery is cylindrical, and if it is square, F is used instead; 20 indicates that the diameter of the battery is 20mm; 32 represents the height of the battery as 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is around 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, free from moisture, etc.), its lifespan can be further extended to 8 years or even 10 years. The usage time of the vehicle remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the usage time will be. If the remote key battery runs out of power, you can directly use the mechanical key to open the vehicle and start the engine. The batteries used in car remote keys are button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each vehicle, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of this battery in car key remotes is very high, making it one of the most common car remote batteries. The voltage of this battery is 3V, while most car key batteries are powered by 9V, so three batteries need to be replaced each time. Examples include Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter 20mm, thickness 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than that of CR2016. However, it is still used in some car keys. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter 20mm, thickness 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium-manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically very stable manganese dioxide, the negative electrode material is metallic lithium, and the electrolyte is a lithium battery. The main components of the electrolyte are dimethoxyethane, propylene carbonate, and lithium perchlorate. Its shape resembles a button, hence it is also called a button lithium battery or lithium-manganese button battery.
19
4
Share

How to Reduce Fuel Consumption for Haval H6?

For the Great Wall Haval H6 with high fuel consumption, pay more attention to driving habits. Generally speaking: avoid prolonged engine idling, and try to minimize sudden braking and acceleration. Use high and low gears appropriately and maintain a moderate driving speed. Additionally, perform regular vehicle maintenance: dirty air filters and oil filters, worn spark plugs, and faulty emission control systems can all increase fuel consumption. Apart from personal driving habits, other factors contributing to high fuel consumption for the Great Wall Haval H6 are as follows: 1. Tires: Tires are easy to inspect, so they should be checked first. If tire pressure is insufficient, fuel consumption will increase. If the pressure is normal, check the tire wear. Severe tire wear often leads to slipping, which also increases fuel consumption. 2. Engine: If engine carbon buildup is significant in a short period, it can also cause high fuel consumption, likely due to the use of substandard fuel. The solution is to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates severe carbon buildup inside the engine, in which case it should be taken to a 4S shop or repair shop for professional cleaning by a technician. 3. Oxygen Sensor: As an internal control unit of the car, the oxygen sensor primarily monitors the air-fuel ratio of the engine. Once damaged, it disrupts the air-fuel ratio, inevitably leading to abnormally high fuel consumption. After the oxygen sensor is damaged, the vehicle will emit dark-colored exhaust during operation. In this case, the oxygen sensor should be replaced as soon as possible. 4. Faulty Engine Control Unit: Although the electronic control unit (ECU) of the engine is highly reliable, faults may still occur in older vehicles. If one of the control units malfunctions, it can lead to increased fuel consumption, accompanied by poor power performance and thick black exhaust emissions.
12
2
Share

Can Only One Driver's License Be Obtained in a Year?

Only one driver's license can be obtained in a year. Below is relevant information about motor vehicle driver's licenses: 1. Definition of a motor vehicle driver's license: A motor vehicle driver's license is a legal document issued by the administrative authorities after a person who is legally permitted to learn to drive a motor vehicle has studied, mastered traffic regulations and driving skills, and passed the required examinations, granting permission to drive a certain type of motor vehicle. 2. Types of vehicles permitted to drive: The order of vehicle types that a motor vehicle driver is permitted to drive is as follows: large passenger vehicles, tractor-trailers, city buses, medium-sized passenger vehicles, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, small automatic transmission passenger vehicles for the disabled, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery vehicles, trolleybuses, and trams.
6
1
Share

Should I Use Internal or External Air Circulation When There's an Odor in the Car?

You should turn on the external air circulation to replenish fresh air. Here are the relevant details: 1. External Circulation: External circulation mode uses a fan to draw outside air into the car, meaning there is airflow between the outside and inside of the vehicle. The air blown by the fan comes from outside, and even if the fan is off, air will still flow into the car while driving, providing fresh air. Sometimes, you may feel airflow even when the fan is off, which is due to the external circulation setting. However, in heavy traffic in the city, the car may fill with exhaust fumes, which is caused by using external circulation. 2. Internal Circulation: Internal circulation mode closes the airflow passage between the inside and outside of the car. Without the fan, there is no airflow circulation, and when the fan is on, the air drawn in comes only from inside the car, creating internal airflow. Internal circulation is mainly used to effectively block external dust and harmful gases from entering the car, such as when driving through areas with smoke, dust, strong odors, or dense traffic, preventing harmful exhaust from the car ahead. Another function is to maintain warmth. Use internal circulation in traffic jams.
13
0
Share

What Causes the Car to Keep Running After Removing the Key?

Power supply relay J329's control wire is short-circuited to ground, resulting in a continuous power supply state even after turning off the ignition switch. Below is relevant information about car stalling: 1. Car stalling: Also known as flameout. When the reactor is operating at a significant reaction rate, if the inlet feed temperature is reduced to the lower limit of the multiple steady-state region, the reaction rate suddenly drops sharply, and the reaction essentially stops. This phenomenon is called flameout. The corresponding inlet temperature is called the flameout point. Generally, it refers to car stalling. 2. Causes of stalling: (1) Automatic transmission models: Automatic transmission models do not stall easily, whereas manual transmission models may stall frequently due to insufficient driving skills. However, it cannot be ruled out that automatic transmission cars may also stall, mainly due to the use of inferior fuel causing engine carbon buildup and stalling. (2) Additionally, for new cars (automatic transmission), the main cause of stalling is insufficient driving proficiency. Another possibility is issues with the car's engine or fuel system, but for new cars, the likelihood of engine problems is relatively small, with most cases being fuel system-related. (3) Finally, for older models, apart from insufficient driving skills, the cause of stalling is often the use of substandard fuel leading to engine carbon buildup and other related issues.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.