How to Turn on the Fog Lights of a Buick Excelle?

2 Answers
McLondyn
07/29/25 8:01am
Buick Excelle is only equipped with one left rear fog light. The method to turn on the rear fog light is as follows: 1. Rotate the light switch to position "3" to turn on the car's headlights. The rear fog light can only be turned on when the headlights are on. 2. Then press the "6" button to turn the rear fog light on or off. When the fog light is on, the indicator light on the instrument panel will illuminate. 3. The rear fog light can be turned off independently of any other lights. Here is some information about the fog lights of the Buick Excelle: 1. The Excelle is not equipped with front fog lights, and there is only one rear fog light, located on the left side. 2. Two rear fog lights can easily be confused with brake lights.
Was this review help?
13
5
Share
MacAutumn
08/12/25 11:14am
I've been driving a Buick Excelle for several years, and turning on the fog lights is quite straightforward. First, you need to start the car and activate the lighting system, such as switching to the low beam position, which turns on the headlights. Then, on the long control stalk to the left of the steering wheel, carefully look for a small ring or knob at the top or side, which might have a fog light icon. Rotating it one notch will turn on the front fog lights, and turning or pulling it further will activate the rear fog lights. Remember to use them only in foggy conditions or when visibility is low, as the bright light can dazzle drivers behind you. In winter, check the bulbs before heading out in the morning, so you don't find out they're broken when the fog gets thick. Proper use can enhance driving safety, especially on highways when sudden fog appears—turning on the fog lights promptly can reduce the risk of rear-end collisions. That's my experience.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

Can the Ora R1 drive on highways?

Ora R1 can drive on highways. The following are precautions for highway driving: 1. Both the driver and front-seat passenger must fasten their seat belts, and the driver is not allowed to answer phone calls. 2. Avoid sudden steering wheel movements while driving at high speeds. 3. Do not change lanes arbitrarily while driving; when changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance. 4. When overtaking, only use the adjacent lane, and immediately return to the driving lane after overtaking. Vehicles must not straddle or drive on the lane dividing line. 5. Do not reverse, drive in the opposite direction, cross the central divider to make a U-turn or turn, or overtake or park on the ramp.
16
0
Share

How Long Can You Continue Driving with a Faulty Mechatronic Unit?

Driving with a faulty mechatronic unit is not recommended, and it should be replaced immediately. Below are the relevant details: 1. Concept: The mechatronic unit is the computer that controls the gear shifting mechanism of the transmission. 2. Consequences of Damage: The mechatronic unit controls the vehicle's transmission gears. Once damaged, it may result in the vehicle being unable to start or, after starting, the transmission may fail to engage gears. This issue is relatively safe as it prevents the driver from operating the vehicle. The most severe scenario is when two gears are engaged simultaneously during driving. If this occurs, it can cause the gears to collide, leading to a bent transmission shaft or even complete transmission failure.
1
2
Share

How many turn signals are required throughout Subject 2?

There are a total of 6 instances where turn signals are required in Subject 2, which are: When starting the vehicle, turn on the left turn signal; When starting on the slope, turn on the left turn signal; During parallel parking, turn on the right turn signal when the vehicle passes the parking spot and stops 30 cm from the side line, preparing to reverse; Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking spot during parallel parking, shift into drive gear and turn on the left turn signal, then turn it off promptly after exiting; When entering the right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failure to use or incorrect use of turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Turning the steering wheel within less than 3 seconds of turning on the turn signal before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed under the following conditions: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and S-curve driving (commonly known as the S-bend) as mandatory items (some regions also include a sixth item: high-speed card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pole test, slope parking and starting, parallel parking, single-plank bridge crossing, S-curve driving, right-angle turns, passing through a width-restricted gate, passing through continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.
19
2
Share

How to Turn On the Ambient Lighting in BYD Han?

Here are the methods to activate the ambient lighting in BYD vehicles: 1. When the vehicle is not started, the interior dome light is turned on by default, and touching it can adjust the brightness; 2. When the vehicle is started, the interior dome light is turned off by default, and touching it can control the on/off function. Below is relevant information about car control buttons: 1. Light buttons: Vehicles require different lights to be turned on in various situations, and the lights serve different functions. 2. Air conditioning buttons: The air conditioning system enhances the comfort of both the driver and passengers. 3. Wiper buttons: Wipers are commonly used during rainy days.
13
3
Share

Will highways be closed on rainy days?

Normally, highways are not closed during regular rainy days unless there are extreme weather conditions such as heavy rain or dense fog, in which case temporary closures may be implemented to prevent accidents. Here are some precautions for driving on highways during rainy days: 1. Stay alert. While driving, in addition to staying focused, turn on the windshield wipers and defoggers to ensure clear visibility through the front and rear windshields for accurate judgment of road conditions. 2. Adjust your state and check the vehicle. Drivers should rest well before traveling to ensure sufficient energy. Secondly, inspect the vehicle's condition thoroughly, performing routine checks such as brakes, steering, lights, dashboard, and tires. In rainy weather, pay special attention to checking the windshield wipers to ensure all components are intact and functioning properly. 3. Control your speed. Drivers should maintain a moderate speed, generally between 80 to 90 kilometers per hour, and avoid sudden acceleration or hard braking during normal driving.
2
5
Share

How long after passing the written test can you take the road test?

Starting from the day you pass the written test (Subject 1), you can apply for the basic skills test (Subject 2) after 10 working days; and you can apply for the road test (Subject 3) after 30 days. More details are as follows: 1. Subject 2, also known as the basic skills test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test, which includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Subject 3, also known as the road test, is part of the motor vehicle driver's license assessment. It refers to the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.