···
Log in / Register

How to Turn on the Fog Lights in a Focus?

3 Answers
DelQuinn
08/28/25 5:37am
To turn on the fog lights in a Focus: 1. Turn on the vehicle's lights; 2. Flip the lever located at the lower left side of the steering wheel to activate the fog lights. The Focus is a compact 4-door, 5-seater sedan with the following dimensions: length 4647mm, width 1810mm, height 1468mm, and a wheelbase of 2705mm. It has a fuel tank capacity of 53 liters. The Focus is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 90 kW at 6500 rpm and a maximum torque of 153 Nm at 4500 rpm. It features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
14
1
Share
DelTanner
09/10/25 4:01am
I've been driving a Focus for several years, and turning on the fog lights is quite simple. First, you need to start the car and then turn on the headlights, usually by twisting to the low beam position. Next, look at the light control lever near the steering wheel - there's an icon marked with 'fog light' or a fog symbol near the handle. Gently twist or push it to activate the front and rear fog lights. Remember to use them only in heavy fog or rainstorms; avoid turning them on at other times to prevent disturbing other drivers. After activating the fog lights, a small indicator light (green or yellow) will illuminate on the dashboard, confirming they're working properly. I once drove on a foggy highway, and turning on the fog lights significantly improved visibility—safety first! You can practice in neutral during regular driving to familiarize yourself with the position and avoid fumbling. Also, pay attention to the car battery's condition; lights may not turn on if the battery is dead. Regular maintenance can save you a lot of hassle.
Was this review help?
1
2
Share
Expand All
SanIvan
10/24/25 4:52am
When teaching kids to drive a Focus, turning on the fog lights is my key focus. First, have them turn the ignition key to power on (no need to start the engine), then switch the headlights to low beam. Locate the rotary knob on the left steering column—a simple twist activates the fog lights. In foggy conditions, turning them on enhances visibility and reduces accident risks, but avoid unnecessary use to save power and prevent fines. I remind my kids to check the dashboard indicator light—if it’s on, they’re good. After driving a Focus for over a decade, I find this design quite user-friendly, especially for beginners. Also, I recommend cleaning the lamp covers before driving to maintain optimal lighting efficiency, save fuel, and avoid issues. With practice, operating them in bad weather becomes second nature—just a few tries to master it.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the Toyota RAV4 in liters?

The fuel tank capacity of the Toyota RAV4 is 55 liters, as officially announced by the manufacturer. The Toyota RAV4 uses 92-octane gasoline, with a fuel consumption ranging from 4.7 to 6.4 liters per 100 kilometers. A full tank can cover a distance of approximately 859 to 1,170 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the remaining fuel. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level. There is additional space between the safe fill level and the tank opening, designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
1
3
Share

What are the types of locomotives?

Locomotives can be classified based on the power unit used, purpose, and running gear form: thermal locomotives and electric locomotives. Below are the relevant introductions: Thermal locomotives: The prime movers installed belong to heat engines, such as steam locomotives, diesel locomotives, gas turbine locomotives, etc. These types of locomotives carry fuel and water, are self-powered, and can operate independently. As long as there are suitable tracks and facilities for adding fuel and water, they can run. However, the weight and external dimensions of the locomotive are constrained by axle load and railway clearance limits, preventing them from being made too heavy or large, thus the weight and size of the power unit installed in the locomotive are also constrained. Both diesel engines and gas turbines are internal combustion engines, and locomotives equipped with these two types of prime movers are called diesel locomotives. Electric locomotives: A type of locomotive that receives power from an external power station transmitted to substations along the railway, and then supplied through overhead contact lines above the tracks or a third rail laid beside the tracks. The power supply capacity is not limited by rated power, therefore, it has the advantages of high power, strong short-term overload capability, high operating speed, fast acceleration, large traction force, and no smoke or exhaust pollution, making it suitable for busy transportation routes or railways with steep gradients and long tunnels, especially suitable for suburban transportation in large cities and underground railway transportation.
3
5
Share

What is the fault when the Jetta EPC light comes on?

The first issue is that the brake lights are not working. When all the brake lights of the vehicle fail to illuminate, the EPC warning light will appear. The second issue is a throttle malfunction. If there is a problem with the engine's throttle or its wiring, the EPC light will also come on. The third issue is a damaged clutch switch. Similar to the brake switch, if the clutch switch is faulty, the EPC light will appear. Below are some relevant details: Definition: EPC stands for Engine Power Control system, also known as the electronic throttle. The EPC indicator light is commonly seen in Volkswagen vehicles. After turning the ignition key, the vehicle begins a self-check, and the EPC light will illuminate for a few seconds before turning off. If the light remains on after the vehicle starts, it indicates a fault in the vehicle's mechanical or electronic systems. Principle: In the EPC system, the traditional throttle cable is replaced by a sensor in the pedal assembly. The Engine Control Unit (ECU) calculates the optimal throttle opening based on the position data fed back by the pedal sensor and sends a signal to the throttle actuator motor to rotate the throttle to the desired angle.
14
5
Share

Can You Take the Subject 1 Exam If You Lose Your ID Card?

A temporary ID card can be used for the exam. The admission ticket and other documents are handled by the driving school, which will distribute them during the exam. Electronic IDs are not acceptable for the exam. If you don’t have an ID card, you can apply for a temporary one, which holds the same validity as a formal ID card. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," you can take the Subject 1 exam twice on the same day. If you fail the first attempt, you can retake it for free. If you fail the second attempt, the exam will be terminated, and you must wait ten days before rescheduling. The Subject 1 exam consists of 100 questions, including multiple-choice and true/false questions, each worth 1 point, totaling 100 points. If you answer 11 questions incorrectly, the system will automatically submit the exam and end the session. The Subject 1 exam is computer-based and lasts 45 minutes. The content of the Subject 1 exam includes: regulations on driver's licenses and motor vehicle management; road traffic conditions and rules; penalties for traffic violations; regulations on traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Exam precautions for Subject 1: Candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue to enter the waiting area. Observe the instructions and procedures displayed on the screen. Before entering the exam hall, store personal belongings in a locker. Upon entering, verify your identity at the assigned station and begin the exam. Ensure the camera is aligned with you and follow exam rules. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect and sign your score report—unsigned reports are invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject allows one exam attempt, with one free retake if you fail. If you skip the retake or fail it, the exam is terminated, and you must reschedule. In contrast, Subjects 2 and 3 allow only five exam attempts, with rescheduling permitted after ten days. If you fail the Subject 3 safe driving knowledge test, your passing score for the road skills test remains valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers traffic laws, regulations, and related knowledge. Subject 2 tests field driving skills. Subject 3 includes two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4, though this term is not officially recognized in regulations (i.e., the Ministry of Public Security’s Order No. 123).
20
4
Share

Does a Faulty Mercedes Auxiliary Battery Affect Normal Driving?

Mercedes auxiliary battery failure does not affect normal driving. The causes of the failure are as follows: 1. Auxiliary battery fuse damage. 2. Auxiliary battery damage. 3. Generator or charging system failure. 4. Related wiring harness failure, etc. Additional information: The battery acts like a large capacitor, absorbing instantaneous overvoltage in the circuit to protect electrical equipment. For auxiliary battery failure, it is necessary to analyze and repair based on the meaning of the fault code. It could be due to low battery voltage or battery damage, and wiring or control circuit failures cannot be ruled out.
3
4
Share

What is the top speed of the Volkswagen Lamando?

The top speed of the Volkswagen Lamando is 225km/h. Here are the relevant details about the Volkswagen Lamando: 1. In terms of appearance, the Lamando has only minor changes compared to the concept version, maintaining a very sporty design. The front face adopts a family-style design, with a three-bar grille connected to the headlights, and round fog lights positioned on either side of the bumper. 2. In terms of power, the Lamando offers two powertrain options: a 1.4TSI engine paired with a 7-speed DSG transmission, and a 1.8TSI engine matched with a 6-speed DSG transmission, delivering a maximum power of 220 horsepower and a 0-100km/h acceleration time of around 6.5 seconds.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.