How to Turn on the Fog Lights for Subject Three?
1 Answers
The fog light switch is located on the vehicle's lighting combination switch, specifically behind the left side of the steering wheel. You need to rotate the combination switch to turn on the fog lights. Here are some important notes: Purpose of fog lights: Fog lights are used in low visibility conditions. Exam tips: During the Subject Three test, there will be a voice prompt to start the lighting simulation operation. Before this, you should check if all lighting switches are turned off (including the lighting control lever on the steering wheel, which should be reset). If the previous examinee did not completely turn off the lights and you proceed directly to the test, you will fail. The fog light button for Subject Three is located on the left side of the driver's seat. First, turn on the vehicle's lights, then some models use a button to activate the fog lights, while others require rotating to turn them on. For most vehicle models, the fog light button is on the left side of the driver's seat. Some vehicles have buttons to turn on the front and rear fog lights. These buttons are usually located near the dashboard and labeled with fog light symbols. After turning on the lights, pressing the front fog light button will activate the front fog lights, and pressing the rear fog light button will activate the rear fog lights. Some models have a single fog light button marked with a fog light symbol. Turning this button to the ON position will activate the front fog lights, and turning it further down will simultaneously activate both front and rear fog lights. During the exam, pay attention to the instructions and remember not to turn on both front and rear fog lights at the same time. Also, always remember to turn off all vehicle lights.
