How to Turn on the Edge's Rain-Sensing Wipers?

What is the actual speed when the dashboard shows 70 km/h?

When the dashboard displays a speed of 70 km/h, the actual speed is typically between 66-68 km/h. The speed shown on the dashboard is intentionally higher than the actual speed. This is not a malfunction of the vehicle but rather a safety measure designed to ensure driving safety. The discrepancy is deliberately set to be small, generally within a range of 3% to 5%. For ordinary vehicles outside highways, the penalties for speeding are as follows: No penalty for exceeding the speed limit by less than 10%; a fine of 50 RMB and 3 demerit points for exceeding the speed limit by 10% to less than 20%; a fine of 50 RMB and 6 demerit points for exceeding the speed limit by 20% to less than 30%; a fine of 200 RMB and 6 demerit points for exceeding the speed limit by 30% to less than 50%; a fine of 1000 RMB and 12 demerit points, with possible license suspension, for exceeding the speed limit by 50% to less than 70%; a fine of 2000 RMB and 12 demerit points, with possible license suspension, for exceeding the speed limit by 70% or more. On roads with speed limits below 60 km/h, a warning is issued for speeding less than 50% over the limit. Special vehicles such as medium and large passenger trucks, commercial vehicles, school buses, and hazardous material transport vehicles are subject to their specific regulations. Speeding penalties differ between highways and ordinary roads. This setup is for safety considerations, and there is no need to worry about the impact. A discrepancy of 1-3 km/h is minimal and can ensure driving safety in critical moments.

20

4

Share

What are the requirements for renewing a driver's license?

Renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other permitted vehicle-type driver's licenses must have less than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses who have demerit points in a scoring cycle, as well as holders of other permitted vehicle-type driver's licenses who have been involved in a traffic accident resulting in death and assumed equal or greater responsibility without having their motor vehicle driver's license revoked, must have completed the inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving license requirements; The motor vehicle driver's license must not be under circumstances such as being legally seized, detained, temporarily suspended, revoked, canceled, or annulled. Renewal materials: Bring two copies of ID card, two 1-inch uncapped color recent photos, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office).

3

0

Share

What is the difference between DJM and EA211?

DJM and EA211 refer to different things: EA211 does not refer to a specific engine; it is an engine platform under Volkswagen, serving as the general code for all Volkswagen engines with displacements below 1.6 liters. DJM is a 1.5-liter naturally aspirated engine under the EA211 platform, matched with models such as the Santana, Jetta, and Bora. Additional information: 1. About EA211: EA211 is an engine developed by Volkswagen based on the MQB platform, including 1.4L four-cylinder turbocharged engines, 1.6L four-cylinder naturally aspirated engines, 1.0L three-cylinder naturally aspirated engines, and 1.2L four-cylinder turbocharged engines, primarily installed in compact cars like the Bora. It features an aluminum cylinder block, further reducing weight and thereby decreasing the car's fuel consumption. The addition of high-pressure direct injection technology significantly enhances the power performance of EA211. 2. About DJM: DJM is a specific model of the EA211 engine, a 1.5-liter naturally aspirated version currently installed in the new Bora model. It delivers a maximum horsepower of 116 hp, a maximum power of 85 kW, and a maximum torque of 150 N·m, making it an economical engine.

9

4

Share

Why doesn't the reversing radar beep?

Reasons why the reversing radar doesn't beep: 1. Improper or damaged wiring connection: If the rear of the car is close to an obvious obstacle but the reversing radar doesn't respond at all, it indicates an issue with the radar's wiring. 2. Low sensitivity and slow response: Sometimes, even when you can see the obstacle in the rearview mirror, the reversing radar fails to recognize it and only beeps when very close, which is due to the radar's poor quality. 3. There is a blind spot at the far left and far right of the reversing radar: When this blind spot is about to touch an obstacle, the reversing radar cannot detect it. The reversing radar, also known as 'reverse collision avoidance radar' or 'parking assist device,' mainly consists of ultrasonic sensors, a controller, and a display.

9

1

Share

How to Prevent Static Electricity in Cars?

Methods to prevent static electricity in cars are as follows: 1. Pay attention to the configuration of interior fiber materials: Friction from fiber fabrics is a major source of static electricity in cars, especially synthetic fiber products, which are more prone to generating static electricity through friction. Therefore, when selecting seat covers, seat cushions, and floor mats, it is recommended to use genuine leather, wool, or pure cotton products. 2. Choose car wax carefully: Car wax has anti-static properties, but different types of car wax have varying levels of anti-static effectiveness. 3. Install a static electricity discharger: A static electricity discharger, also known as a static eliminator, works by conducting static electricity inside the car to the discharger through its internal metal wire, and then discharging it into the air or the ground, achieving the goal of eliminating static electricity in the car.

1

0

Share

What is the steering wheel handling mantra for beginners?

New drivers should follow this steering wheel handling mantra: Left hand at the 9 o'clock position, right hand between 3-4 o'clock position, with the thumb gripping the inner side of the wheel and the other four fingers holding the outer side. Below is relevant information about steering wheels: 1. Function: The steering wheel is typically connected to the steering column via splines. Its purpose is to convert the force applied by the driver on the wheel's edge into torque transmitted to the steering column. Larger diameter steering wheels require less hand force from the driver during turns. The steering intermediate shaft serves as a connector between the steering gear and steering column, facilitating steering gear standardization while compensating for manufacturing and installation errors, enabling more rational installation of steering components in vehicles. 2. Fault diagnosis: Drive at approximately 15 km/h on open roads while making left and right turns to check steering responsiveness. Verify whether the wheel returns to center properly and if the vehicle drifts when releasing the wheel.

15

0

Share

How to Turn on the Edge's Rain-Sensing Wipers?

What is the actual speed when the dashboard shows 70 km/h?

What are the requirements for renewing a driver's license?

What is the difference between DJM and EA211?

Why doesn't the reversing radar beep?

How to Prevent Static Electricity in Cars?

What is the steering wheel handling mantra for beginners?

What does the yellow wrench on the dashboard indicate?

Where is the high beam height adjustment for the Sagitar?

How to Cancel a Driving Test File?

How Long Does It Take to Recharge a Dead Car Battery by Driving?