How to Turn on the Defogger in the Buick Excelle?

What is the minimum engine displacement required for motorcycles to access highways?

Motorcycles with an engine displacement exceeding 50cc are permitted on highways. Below are the key considerations for motorcycles on highways: Engine displacement requirements: Motorcycles with engine displacements below 50cc are prohibited from entering highways. Helmet usage: When riding on highways, motorcycle operators must not carry passengers and are required to wear helmets. Toll charges: Except during public holidays when tolls are waived, motorcycles are charged according to the same standards as passenger vehicles with fewer than 7 seats. Lane usage: In accordance with speed limit regulations for different highway lanes, motorcycles should travel in the outermost lane. In case of mechanical failure, riders must activate hazard lights, move the vehicle to the emergency lane, and place warning triangles at the parking location while awaiting assistance.

6

2

Share

Does having children in the car count as overloading?

Children in the car do count as overloading. Overloading is calculated based on headcount. As long as the number of passengers exceeds the limit, even if it's a child or an infant being held in arms, it's considered overloading. For driving an operational passenger vehicle or a passenger car with overload (but less than 20%), or a truck with overload (but less than 30%), 3 demerit points will be deducted. For a truck overloaded by more than 30% or carrying passengers illegally, or a passenger car (other than operational passenger vehicles) overloaded by more than 20%, 6 demerit points will be deducted. For school buses or passenger buses, if there is serious overloading or serious speeding, regardless of whether an accident occurs, once discovered by traffic police or captured by cameras, it constitutes a crime.

5

3

Share

How to Add Refrigerant Oil to Car Air Conditioning?

There are two methods for adding refrigerant oil to car air conditioning: the direct pouring method and the vacuum suction method. Direct Pouring Method: Pour the refrigerant oil into a clean measuring bottle and then directly pour it into the compressor's plug port. This method is suitable when replacing the evaporator, condenser, and receiver-drier. Vacuum Suction Method: 1. Evacuate the system to 100kPa; 2. Prepare a measuring cup with graduations and fill it with slightly more refrigerant oil than the required amount; 3. Close the high-pressure manual valve and the auxiliary valve, disconnect one end of the high-pressure hose from the manifold gauge set, and insert it into the measuring cup; 4. Open the auxiliary valve, and the oil will be sucked into the system from the measuring cup; 5. When the oil level reaches the specified graduation, immediately close the auxiliary valve.

17

2

Share

How to Troubleshoot ABS Light Illumination?

ABS light illumination troubleshooting methods: 1. Confirm the fault condition and symptoms; 2. Conduct a visual inspection of the system to check for brake fluid leaks, damaged wires, loose connectors, low brake fluid level, etc.; 3. Read the fault codes, either directly using a diagnostic scanner or by interpreting the warning light codes and then referring to the service manual for the corresponding fault conditions; 4. Based on the interpreted fault conditions, use necessary tools and instruments to conduct an in-depth inspection of the faulty area to confirm the fault location and cause; 5. Resolve the fault; 6. Clear the fault codes; 7. Check if the warning light remains illuminated. If the warning light stays on, there may still be a fault in the system, or the fault may have been resolved but the fault codes were not cleared.

18

1

Share

Can I drive when the car maintenance light is on?

You can drive when the car maintenance light is on, but you should get maintenance done as soon as possible. Car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance scopes. The purpose of car maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service cycle. Changing the engine oil is a common maintenance item. The engine oil mainly plays a lubricating role, and because it has a lifespan, it needs to be replaced regularly. The oil filter, also known as the oil purifier, functions to remove various impurities from the engine oil and ensure the normal operation of the lubrication system. The oil filter should be replaced together with the engine oil during an oil change.

13

5

Share

What is the normal tire pressure for a Fit?

The normal tire pressure for a Fit generally ranges from 2.3 to 2.8 BAR, and any value within this range is considered safe. However, during summer when temperatures are high, the tire pressure, which was initially within the normal range, may actually rise above 3.0 BAR after driving. Therefore, in summer, it is advisable to choose a lower tire pressure within the normal range, with 2.3 to 2.5 BAR being more appropriate. The body dimensions of the Fit are 4109 mm in length, 1694 mm in width, and 1537 mm in height, with a wheelbase of 2530 mm. The Fit features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam semi-independent suspension.

13

0

Share

How to Turn on the Defogger in the Buick Excelle?

What is the minimum engine displacement required for motorcycles to access highways?

Does having children in the car count as overloading?

How to Add Refrigerant Oil to Car Air Conditioning?

How to Troubleshoot ABS Light Illumination?

Can I drive when the car maintenance light is on?

What is the normal tire pressure for a Fit?

What to Do If a Vehicle Fails the Annual Environmental Inspection?

What is the minimum ground clearance of the Ford EVOS?

What is the emission standard for a 2017 car?

Can the Lynk & Co 01 Trunk Open Automatically?