How to Turn on the Cold Air in Roewe Air Conditioning?

1 Answers
OOscar
07/30/25 4:38am
Method to turn on the cold air in Roewe air conditioning: The air conditioning switch is the AC button. Pressing the AC button turns on the air conditioning, and turning the temperature control knob to the blue position activates the cold air. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the cabin, providing passengers with a comfortable environment, reducing driver fatigue, and enhancing driving safety. Roewe offers models such as the Roewe RX3, Roewe RX5, and Roewe i5. Among them, the Roewe i5 is a high-performance internet-connected compact car under the Roewe brand, with body dimensions of 4601mm in length, 1818mm in width, and 1489mm in height, and a wheelbase of 2680mm. In terms of exterior design, the Roewe i5 Linghao version features the Roewe family's rhythmic floating wing grille design, paired with rectangular headlight clusters, and a trapezoidal air intake below. The side profile adopts a dual waistline design, while the rear features a ducktail spoiler. The entire series comes with a limited-time free upgrade to LED headlights.
Was this review help?
20
3
Share
More Forum Discussions

What Causes High Idle Speed in Vehicles?

Vehicle high idle speed causes are as follows: Idle switch not closing: The rotation speed signal determines the fuel injection quantity and timing, but the engine is actually operating under idle conditions with reduced air intake, causing over-rich mixture and increased RPM. Faulty idle air control valve: When idle speed exceeds the set value, the ECU commands the idle control valve to reduce the bypass air intake. Issues like sticky valve movement due to oil contamination/carbon deposits or incomplete throttle closing prevent proper idle adjustment by ECU, resulting in unstable idle. Intake manifold air leakage: The idle control valve opening strictly follows a mathematical relationship with air intake volume. Air leaks disrupt this relationship, making the air flow sensor unable to detect actual intake volume. This leads to inaccurate ECU air intake control and unstable engine idle.
10
1
Share

How Many Years Can a Cut Rear Fender Last?

After being cut, a car's rear fender can typically last around three to five years. If the welding repair and rust-proofing are done well, it won't rust within this period. Impact of Cutting the Rear Fender: After cutting and repainting the rear fender, color differences are likely to appear, and the repainted finish won't be as durable as the factory paint. If the rear fender is replaced, there might be misalignment with the rear door lock, as manual welding and measurements can't match the precision of the factory installation. Fender Location: Fenders are divided into front and rear fenders based on their installation position. The front fender is installed near the front wheel and must ensure sufficient space for the wheel's maximum turning and bouncing limits.
2
0
Share

What is the function of the intake manifold pressure sensor?

The function of the intake manifold pressure sensor is to measure the amount of air entering the engine and provide this information to the engine control computer as a basis for controlling fuel injection quantity and ignition timing. The working principle of the intake manifold pressure sensor is to determine air density by measuring the absolute pressure in the intake pipe, and then calculate the amount of incoming air in conjunction with the engine speed. The intake manifold is located between the throttle valve and the engine intake valve. It is called a manifold because after air enters the throttle valve, it passes through the manifold buffer system, and the airflow path diverges here, corresponding to the number of engine cylinders. For example, a four-cylinder engine has four paths, and a five-cylinder engine has five paths, directing air into each cylinder respectively.
14
0
Share

Is Wheel Alignment Necessary After Replacing Shock Absorbers?

Replacing shock absorbers does not require a wheel alignment because during the replacement process, the entire connection between the vehicle's front suspension and the wheel hub is disassembled. However, the length of the tie rods, which affects the front wheel toe-in, remains unchanged. After reinstalling the tie rods post-replacement, their relative positions return to their original state. The shock absorber assembly consists of the shock absorber, lower spring seat, dust cover, spring, cushion, upper spring seat, spring seat, bearing, top mount, and nut. The shock absorber assembly converts the spring's elastic energy into heat through fluid dynamics, rationalizing vehicle movement to eliminate road vibrations, enhance driving stability, and provide comfort and a sense of steadiness to the driver.
1
0
Share

Is Brake Maintenance at 4S Stores Necessary?

4S store brake maintenance is very necessary. Reasons for brake maintenance: The braking system of motor vehicles is related to driving safety. If there are problems with the braking system, the driving safety of the vehicle cannot be guaranteed. Regular maintenance of the vehicle's braking system is very beneficial as it can prevent traffic accidents. The Li ONE requires maintenance. Automobile maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas. Purpose of automobile maintenance: The purpose of automobile maintenance is to keep the vehicle clean and in normal technical condition, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
12
1
Share

What is the content of the Subject 1 exam?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulates that the content of the Subject 1 exam includes: laws, regulations, and rules on road traffic safety; traffic signals and their meanings; knowledge of safe driving and civilized driving; safe driving knowledge under conditions such as highways, mountainous roads, bridges, tunnels, nighttime, adverse weather, and complex road conditions; emergency handling knowledge in situations like tire blowouts, steering failure, and brake failure; general knowledge of motor vehicle structure, main safety devices, and basic knowledge of daily inspection and maintenance; basic knowledge of self-rescue and first aid after traffic accidents, as well as common hazardous materials. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 exam consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the exam, the system will automatically submit the paper and end the exam. Subject 1, also known as the Subject 1 theory exam or driver theory exam, is part of the motor vehicle driving license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer, with a time limit of 45 minutes. Notes for the Subject 1 exam: Candidates should pay attention to their attire and are not allowed to wear slippers. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the exam room. Upon entering, candidates will be assigned a seat at the identity verification station. After finding their seat, they can begin the exam. Ensure the camera is aligned with you and comply with exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can schedule the Subject 1 exam. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail it again, the exam process ends, and you must reschedule. For Subjects 2 and 3, there are only five exam attempts. Subjects 2 and 3 must be scheduled at least ten days apart. If you fail the Subject 3 safe and civilized driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the exam on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills exam. Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include the term "Subject 4."
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.