How to Turn on the Cold Air in Qoros 5?
4 Answers
Method to turn on the cold air in Qoros 5: The AC button on the car's air conditioning control panel is the cooling switch for the car's air conditioning system. After pressing the AC button, the compressor clutch will engage, and the engine will drive the compressor to operate. The car air conditioning system requires refrigerant, and the refrigerant used in Qoros 5 is R134a. This refrigerant needs to be replaced periodically. If the refrigerant is not replaced for a long time, it will result in poor cooling performance and slower cooling speed. The Qoros 5 is equipped with a 1.6-liter inline 4-cylinder turbocharged engine, but it comes in two different tuning versions: high power and low power. The low-power version has a maximum power of 115 kW and a maximum torque of 210 Nm, while the high-power version has a maximum power of 145 kW and a maximum torque of 290 Nm.
A veteran driver with ten years of experience tells you how to do it: First, start the engine of the Qoros 5 and let the car warm up for a few dozen seconds. Then, press the AUTO button on the center console to activate the automatic air conditioning. Simply turn the temperature adjustment knob to lower the temperature. In summer, I usually turn it below 20°C to get cool air. When you first turn on the air conditioning, the fan speed will automatically increase, and once the car cools down, the system will reduce the fan speed on its own. If you're in a hurry to cool down, press the recirculation button to lock in the cool air and prevent hot air from outside from entering. Also, remember to turn off the AC a few minutes before parking to let the air conditioning ducts dry out, which helps prevent bacteria and odors.
This is how I operate the air conditioning every time I drive the Qoros 5: After stepping on the brake and pressing the start button, I directly press the AUTO button in the air conditioning area near the steering wheel. Then, I turn the silver temperature knob to the left, and the screen will display the temperature number. I usually set it to around 22 degrees. At this point, the vents will blow cool air! If you find the airflow too strong, simply press the manual airflow decrease button to reduce it. Oh yes, remember to change the air outlet mode to blow towards the occupants on the central control screen's air conditioning interface, not towards the windshield. If you're driving long distances, occasionally press the external circulation button to refresh the air, which helps prevent dizziness.
Turning on the AC in the Qoros 5 is actually very simple. After starting the engine with the key, directly press the circular AUTO button on the AC panel to activate the automatic mode, then immediately turn the temperature knob to lower the value—it's recommended to set it between 18-22°C. At this point, the system automatically turns on the compressor, and you can feel the cool air from the vents. To adjust the fan speed, use the airflow button with the plus and minus symbols. I've tried turning on the AC while activating the seat ventilation, and it keeps my back particularly cool. Keep an eye on the windshield for fogging—if fog appears, pressing the defrost button works better.
